月球探测器软着陆缓冲机构触月敏感技术

简介了国外月球和火星等探测器软着陆缓冲机构＂触地＂敏感技术与应用,提出了采用冲击加速度检测的探测器软着陆缓冲机构（足垫）触月敏感触发方案,阐述了敏感触发装置的设计思想,分析了探测器软着陆触月过程的动力学响应,论述了触发装置的冲击加速度敏感检测方式与原理以及电路单元设计。该装置比较适合月球探测器软着陆缓冲机构的结构和工作特点,可以满足制导、导航与控制（GNC）主控系统设计要求。     

跨声速风洞斜孔壁非线性流动试验

为分析跨声速风洞斜孔壁近壁区域的流动特性，评估气流偏角-压力系数的非线性关联，在0.6 m跨超声速风洞中开展了基于七孔探针的流动特性测量试验。通过气流偏角和压力系数分布分析了斜孔壁流动的差阻特性，以及马赫数、模型升力对斜孔壁流动的影响，最后基于试验结果发展了计算斜孔壁特性参数的微分法，并与经验方法结果进行对比。结果表明，斜孔壁流动呈现出明显的差阻性和非线性，在负压差范围内，近壁流动仍以出流为主；高亚声速时，空风洞模型区孔壁流动特性趋于实壁；安装模型后，随着升力的增大，升力面对应的孔壁区域流动向入流发展，孔壁流动特性趋于开口边界。     

Distribution and variability of accelerated electrons at Mars

We investigate accelerated electrons observed by Mars Global Surveyor (MGS), using data from the Electron Reflectometer (ER) instrument. We find three different types of accelerated electron events. Current sheet events occur over regions with weak or no crustal fields, have the highest electron energy fluxes, and are likely located on draped magnetotail fields. Extended events occur over regions with moderate crustal magnetic fields, and are most often observed on closed magnetic field lines. Localized events have the lowest energy fluxes, occur in strong magnetic cusp regions, and are the most likely kind of event to be found on open magnetic field lines. Some localized events have clear signatures of field-aligned currents; these events have much higher electron fluxes, and are preferentially observed on radially oriented open magnetic field lines. Electron acceleration events, especially localized events, are similar in many ways to events observed in the terrestrial auroral zone. However, physical processes related to those found in the terrestrial cusp and/or plasmasheet could also be responsible for accelerating electrons at Mars.     

Design-to-Cost Applied Within an Integrated System Model

In an environment of declining financial budgets for space projects, new approaches - such as Design-To-Cost - are being implemented to improve today's satellite design processes. Using an example of a current mission (the power subsystem of the Solar Probe spacecraft) under study at NASA's Jet Propulsion Laboratory, the main part of the paper discusses an Integrated System Model (structured into a performance model, a cost model, and an effectiveness model) that is part of a model-based design process used to perform cost-effectiveness trades. A simulation tool is used during the first step to size the components of the power subsystem, and then simulate its performance during operation. The determined dimensions are transferred into an EXCEL^TM-spreadsheet and linked to the components' costs. With a cost accounting tool that combines cost estimating relationships with the Work Breakdown Structure of the power subsystem, the life-cycle cost of each alternative design concept is computed. To determine the cost-risk of the different design alternatives for each component, cost probability distributions are introduced. By performing Monte-Carlo simulations, cost sensitivities are revealed. In the next step of the trade study process, the effectiveness of the alternatives is analyzed. Having determined cost and effectiveness, estimates can be made for where the different alternatives lie in the design space. The last part of the paper identifies the main drivers for the spacecraft's performance and cost. Finally it is shown how the mission design benefited from the Integrated System Model and from the application of Design-To-Cost.     

自主火星探测高集成离子与中性粒子分析仪

小型化、高集成化是深空探测载荷发展的主要趋势。在我国自主火星探测计划中,设计了一种高集成化的火星离子与中性粒子分析仪。采用从传感器到电子学进行最大限度共用的设计思路,在一台仪器中实现对离子和能量中性原子进行能量、方向和成分的探测,大大降低了仪器对卫星平台的资源需求。仪器采取静电分析进行离子的方向和能量测量、采取飞行时间方法进行离子成分的测量。中性原子采用电离板电离成带电离子,后端的能量测量和成分测量与离子相同。鉴定件样机已经完成了初步的测试定标,结果表明其满足设计要求。     

期望状态序列导向的深空探测器规划修复方法

Aiming at the challenges caused by the persistence, concurrency and energy consumption of probe actions, a plan repair method of deep space probe based on the expected state sequence is proposed. In this method, the expected state sequence is formed of the expected effect of the unfinished action and the expected precondition of the unexecuted action in the pre designed plan, according to the execution status of the action. The expected state sequence is an ordered set of states with mixed logic and energy, providing subgoals for plan repair and also transforming the plan repair problem into the state transition path searching problem. During the search, the plan repair strategy with energy supply priority is proposed, which separates the logic repair from energy repair to reduce the difficulty of solving the problem. And this method enables the probe to recover from plan failure autonomously. Finally, the effectiveness and rationality of the proposed method are verified through simulation by taking the Mars Orbiter as an example.     

火星车转移坡道柔顺性优化设计及动力学分析

对一种抽展式火星车转移坡道开展柔顺性优化设计和动力学分析。首先，分析火星车与存在异面角的坡道的挤压几何原理。然后，设计坡道的间隙机构和限位机构，并计算出机构关键设计参数的最优值，以自适应调整两侧坡道的距离，〖JP2〗减小火星车与坡道护栏之间的相互作用力。最后，对坡道下落过程和火星车在坡道上的行驶过程进行动力学仿真，验证坡道柔顺性优化设计的效果。结果表明：优化后的坡道柔顺性大幅提高，坡道可以自适应调整两侧的距离；使用优化后的坡道，可以有效降低火星车与坡道护栏的作用力，实现火星车在坡道上的安全行驶。     

直流电弧等离子体炬数值模拟与诊断

直流电弧等离子体炬内部物理过程复杂且具动态性,较难对其进行准确描述与深入研究,且其工作温度较高,其状态参数难以使用常规方式测量。针对直流电弧等离子体炬,建立流动、传热和电磁相互耦合的数值模型,基于Fluent软件对直流电弧等离子体炬进行三维数值模拟和特性分析,设计并搭建了一套热焓探针实验系统,完成对直流电弧等离子体炬射流参数的测量分析。结果表明:建立的数值模型模拟结果与实验测量结果吻合较好,误差在10%以内;炬内温度与速度最大值与工作气流量呈正相关,均出现在靠近阴极区域,且沿轴线逐渐降低;等离子体炬内高温区与高电流密度区重合。     

火星车三折平展坡道转移方案及转移姿态分析

以火星车从着陆平台安全转移至火星表面为研究目标,提出一种三折平展坡道转移方案。火星车坡道式转移方案难点在于,着陆点地形地貌不确定和着陆器自身姿态的不确定将导致火星车转移姿态不确定从而增大转移风险。为保证火星车坡道式转移安全性,开展火星车坡道式转移姿态分析,获得满足火星车安全转移要求的最小坡道长度并评价出极限转移姿态。为使三折坡道展开总长度尽可能靠近最小坡道长度需求,进行了三折坡道长度优化分析,获得在着陆器构型约束下三折坡道长度最大值,可为我国火星车转移工程实施提供借鉴。     

中国月球探测器的成就与展望

全面而简要地回顾了国内外月球探测的发展历程,介绍了中国月球探测器的工程研制和飞行任务实施情况,总结了中国月球探测器取得的技术成就和科学成果,展望了中国月球探测器的未来发展。