磁阻尼对火星探测器降落过程的动力学效应

火星稀薄的大气使得探测器再入火星时难以获得足够的减速阻力,为此,文章提出利用磁阻尼增加阻力的概念。高速再入的探测器与火星大气剧烈摩擦产生等离子体,利用探测器上的磁偶极场将等离子体捕获,同时在火星大气中形成一个“磁泡”区域并跟随探测器。由“磁泡”束缚的等离子体与来流的中性气体发生碰撞获得动量,又通过磁场作用将动量传递给探测器,从而使探测器获得一定的减速阻力。在磁阻尼的作用下,在同样的开伞高度探测器速度可降至更低,而低速开伞又可提高阻力伞打开的可靠性。因此,磁阻尼不仅可加快降低再入速度,而且还有助于提高探测器着陆火星的安全性。     

论航天火星探测

回顾了 2 0世纪航天火星探测的历史和成就 ,论述了火星探测器飞行轨道的特点 ,展望了 2 1世纪初期航天火星探测的前景     

美国火星表面探测使命述评（下）

从1975年8月发射（1976年7月着陆火星）的海盗-1探测器以来,美国已成功执行了6次火星表面探测使命,即海盗-1与海盗-2轨道器/着陆器,＂火星探路者＂（MPF）着陆器/巡游车,＂勇气＂与＂机遇＂火星探测巡游车（MER）,以及＂凤凰＂着陆器;而推迟到2011年发射的火星科学实验室（MSL）将火星着陆技术与表面巡游车技术推向一个新的高度。从＂海盗＂着陆器到MSL＂好奇心＂巡游车、美国历经三种火星着陆系统与三代火星表面巡游车技术的发展。三种着陆系统为着陆腿着陆系统（＂海盗＂与＂凤凰＂）,气囊着陆系统（MPF与MER）,以及空中吊机着陆系统（MSL）。三代巡游车为MPF＂旅居者＂巡游车、MER＂勇气＂与＂机遇＂巡游车,以及MSL＂好奇心＂巡游车。现在,美国在火星进入、降落与着陆（EDL）运作与表面避障移动方面,已达到技术成熟与先进的水平,满足安全着陆与表面移动探测的要求。文章阐述美国上述七项火星表面探测使命的立项背景、科学目标与有效载荷、飞行系统组成,以及飞行运作程序;分析美国火星着陆技术与表面巡游车技术的发展。     

基于地球红外背景模拟的 水云大气影响初步分析

为支持地球红外背景的模拟研究,以天基观测为前提,计算了2个大气窗口下,4个具有典型大气和地表特征的区域在水云大气下的路径透过率和各成分辐射亮度。通过相对变化比例,讨论了地球背景模拟中水云与地表的图像区分以及地域的影响。结果表明,水云对地球背景辐射传输影响显著:云层下方辐射会被强烈衰减,同时观测路径中的散射辐射大幅增强。在同一选定区域下,积云大气的观测路径亮度相对无云大气下变化最大,在相同水云类型条件下,大气散射和太阳散射亮度在不同区域区别较大,说明在模拟水云地球背景时不能忽略地域的影响。计算和分析结果可为地球背景模拟中的水云红外图像生成提供一定的数据基础和技术支持。     

Numerical modeling of inhomogeneous orographic wave influence on planetary waves in the middle atmosphere

Parameterization of dynamical and thermal effects of stationary orographic gravity waves (OGWs) generated by the Earth’s surface topography is incorporated into a numerical model of general circulation of the middle and upper atmosphere. Responses of atmospheric general circulation and characteristics of planetary waves at altitudes from the troposphere up to the thermosphere to the effects of OGWs propagating from the earth surface are studied. Changes in atmospheric circulation and amplitudes of planetary waves due to variations of OGW generation and propagation in different seasons are considered. It is shown that during solstices the main OGW dynamical and heat effects occur in the middle atmosphere of winter hemispheres, where changes in planetary wave amplitudes due to OGWs may reach up to 50%. During equinoxes OGW effects are distributed more homogeneously between northern and southern hemispheres.     

An ion analyzer for the lunar surface with E-parallel–B

We present a novel instrument concept to measure the energy and mass spectra of ions incident on the lunar surface, based on the E-parallel–B or Thomson-parabola device used extensively as a diagnostic in the plasma fusion community. The Apollo-era Suprathermal Ion Detector Experiment (SIDE) was the first instrument package to perform in-situ measurements of ions incident on the lunar surface. The ions can originate from a variety of sources, including the solar wind, the Earth’s magnetotail, and photoionization of the thin lunar atmosphere. The species and energy distribution of ions arriving at the lunar surface depend in a complicated and poorly-understood fashion on the phase of the lunar day, the position of the Moon with respect to the Earth, and on the local plasma environment.     

Photolytic behaviour of methane at Lyman-α and 248 nm: Studies in the frame of a simulation program of Titan’s atmosphere (S.E.T.U.P.)

This paper first describes briefly some of the forefront global simulations of Titan’s atmosphere that have been carried out up to now. In these experiments, an initial gaseous mixture of N₂/CH₄ is submitted to a single energy source and the retrieved gas and/or solid phase(s) is/are analyzed by different techniques.     

Electromagnetic waves observed by Venus Express at periapsis: Detection and analysis techniques

The magnetometer on Venus Express was designed to be able to obtain 128 Hz samples of the magnetic field from two sensors in a gradiometer configuration. This mode is used around periapsis to determine whether the signals reported at low altitudes near 100 Hz, had the properties of electromagnetic waves generated by electric discharges in the Venus atmosphere. The lack of a magnetic cleanliness program and the shortness of the magnetometer boom make this a challenging measurement. Fortunately the signals are sufficiently strong that they can be easily resolved with rather straightforward analysis techniques.     

Tidal associated temperature disturbances observed at the middle atmosphere (30–65 km) by a Rayleigh lidar at 23°S

A lidar has been operated in São José dos Campos, Brazil (23.2°S, 45.8°W) since 1972, mainly dedicated to the study of mesospheric sodium at the 589 nm resonant line. The molecular Rayleigh scattering can also be used provided we limit the height to ∼75 km where the sodium scattering begins. Nevertheless, the weak signal obtained only permits the determination of density and temperature profiles by accumulating a large number of shots giving only nocturnal average profiles. Temporal variations in density and temperature on the scale of hours can however, be obtained by performing a superposed epoch analysis for a given time interval and covering a period of several days. In this way we obtained hourly mean profiles grouped by months, seasons and overall, with data acquired from 1993 to 2004. The difference between the hourly temperatures and the nocturnal means shows for some months, with enough data coverage, downward propagating structures that apparently have tidal origin. The seasonal averages show a recurrent feature with high temperatures before and low temperatures after midnight above 50 km. Some similarity is found with the GSWM model, but the observed temperature amplitudes are twice of that for the model.     

Integration of lessons from recent research for “Earth to Mars” life support systems

Development of reliable and robust strategies for long-term life support for planetary exploration must be built from real-time experimentation to verify and improve system components. Also critical is incorporating a range of viable options to handle potential short-term life system imbalances. This paper revisits some of the conceptual framework for a Mars base prototype which has been developed by the authors along with others previously advanced (“Mars on Earth^®”) in the light of three years of experimentation in the Laboratory Biosphere, further investigation of system alternatives and the advent of other innovative engineering and agri-ecosystem approaches. Several experiments with candidate space agriculture crops have demonstrated the higher productivity possible with elevated light levels and improved environmental controls. For example, crops of sweet potatoes exceeded original Mars base prototype projections by an average of 46% (53% for best crop) ultradwarf (Apogee) wheat by 9% (23% for best crop), pinto bean by 13% (31% for best crop). These production levels, although they may be increased with further optimization of lighting regimes, environmental parameters, crop density etc. offer evidence that a soil-based system can be as productive as the hydroponic systems which have dominated space life support scenarios and research. But soil also offers distinct advantages: the capability to be created on the Moon or Mars using in situ space resources, reduces long-term reliance on consumables and imported resources, and more readily recycling and incorporating crew and crop waste products. In addition, a living soil contains a complex microbial ecosystem which helps prevent the buildup of trace gases or compounds, and thus assist with air and water purification. The atmospheric dynamics of these crops were studied in the Laboratory Biosphere adding to the database necessary for managing the mixed stands of crops essential for supplying a nutritionally adequate diet in space. This paper explores some of the challenges of small bioregenerative life support: air-sealing and facility architecture/design, balance of short-term variations of carbon dioxide and oxygen through staggered plantings, options for additional atmospheric buffers and sinks, lighting/energy efficiency engineering, crop and waste product recycling approaches, and human factor considerations in the design and operation of a Mars base. An “Earth to Mars” project, forging the ability to live sustainably in space (as on Earth) requires continued research and testing of these components and integrated subsystems; and developing a step-by-step learning process.