气象卫星HRPT系统的误码率测量

本文扼要介绍了数传系统误码率测量的基本原理和方法。并以气象卫星HRPT(高分辨率图象传输)系统的误码率测量为例,提出了以可编程存贮器组成本地数据序列产生器,使误码率测量逐步趋向通用化。     

紧缩平面场扫描架系统研制

紧缩平面场(CATR)是在较小的微波暗室里模拟远场的电磁环境,以行进各种天线的测量和研究.其最终性能指标要由紧缩平面场扫描架评定.根据紧缩平面场扫描测量原理,及其对扫描架平面度、直线度、定位精度及自动化程度的要求,研制了极坐标型紧缩场扫描架系统,通过采用高精度直线导轨、平面度微调方式和基于工业控制计算机的数字控制技术,达到了所要求的检测精度,满足了紧缩平面场扫描测量的要求.     

目标天体极轨道卫星的轨道寿命

星际探测器轨道的特征与探测目的密切相关，对目标天体两级地区进行探测显然采用的是极轨道（或接近极轨道）。对于这类卫星（或称轨道器），如果轨道半长径较大，则会因第三体报骚动国导致轨道偏心率增大，使其近星距减小到等于目标天体的赤道半径而落到该天体上，结束其运动寿命，即使目标天体不存在大气（如月球等）亦会如此。     

CBERS-1卫星红外多光谱扫描仪图像预处理方法

文章介绍了中国和巴西联合研制的资源一号卫星 (CBERS_1)上的有效载荷之一 - -红外多光谱扫描仪 (IRMSS)图像数据的处理 ,包括错位校正、相对辐射校正和去除噪声等处理过程。     

应用自定位技术提供高精度的弹道位置参数

本文介绍了对连续波雷达的多普勒频率信息,用自定位技术获得高精度的弹道位置参数的一种方法。通过一些试验弹道的仿真计算,其结果表明当观测误差噪声为白噪声时,该方法所提供的弹道位置参数将比目前由连续波雷达定位信息提供的位置参数,其精度有明显的提高。     

玫瑰星座的优化设计方法

玫瑰星座是一种均匀分布的星座，常用于全球连续覆盖。本文对玫瑰星座的基本理论进行了论述，提出了玫瑰星座用于实现全球一重连续覆盖时的优化方法。用本文提出的方法对卫星总数多达３００的玫瑰星座进行了优化计算并给出了计算结果。     

Galileo real-time orbit determination with multi-frequency raw observations

Real-time GNSS-based applications require corresponding real-time orbit products. While traditional GNSS orbits are generated with the dual-frequency IF (Ionosphere-Free) model, the increase of multi-frequency signal satellites brings new challenges for the data processing. Therefore, real-time orbit determination with the multi-frequency UC (Uncombined) model is introduced in this study considering its flexibility. With the derived mathematical model conforming to IGS (International GNSS Service) dual-frequency clock definition and one-week triple-frequency Galileo observation data from 90 IGS network stations, the convergence and accuracy of real-time orbits is assessed and the characteristics of satellite IFCB (Inter-Frequency Clock Bias) are analyzed. Results indicate that the model differences, including dual-frequency IF model, dual-frequency UC model and triple-frequency UC model, contribute to only cm-level differences with CODE (Center for Orbit Determination in Europe) final orbits after a convergence time of around 12 h. The constellation-mean RMS (Root Mean Square) differences of the converged real-time orbits with the CODE final orbits reaches about 5.0 cm, 7.0 cm and 5.0 cm for the radial, tangential and normal directions. The convergence of satellite IFCB is much faster than that of satellite orbit, which reflects a loose correlation between these two parameters. While the Galileo satellite IFCB are temporally stable, the modeling of satellite IFCB may be unreliable when over constrained and becomes even more unstable with commonly encountered datum changes. In summary, real-time GNSS orbit determination with multi-frequency raw observations is feasible and extendable with proper treatment of IFCB.     

Satellite orbits in Levi-Civita space

In this paper we consider satellite orbits in central force field with quadratic drag using two formalisms. The first using polar coordinates in which the satellite angular momentum plays a dominant role. The second is in Levi-Civita coordinates in which the energy plays a central role. We then merge these two formalisms by introducing polar coordinates in Levi-Civita space and derive a new equation for satellite orbits which unifies these two paradigms. In this equation energy and angular momentum appear on equal footing and thus characterize the orbit by its two invariants. Using this formalism we show that equatorial orbits around oblate spheroids can be expressed analytically in terms of Elliptic functions. In the second part of the paper we derive in Levi-Civita coordinates a linearized equation for the relative motion of two spacecrafts whose trajectories are in the same plane. We carry out also a numerical verification of these equations.     

基于ECSS标准的航天器姿轨控系统内1553B总线数据协议设计

摘要： 国内外航天器姿轨控系统广泛应用基于1553B内总线的体系结构.针对国内航天器姿轨控系统内部1553B总线数据协议不统一带来的可集成性、可扩展性和通用性差的问题，本文设计了基于ECSS标准的姿轨控系统内1553B数据总线协议，从姿轨控系统内部总线数据业务需求分析出发，提出了四层结构的数据协议体系结构，重点介绍了在应用支持层和链路服务层应用ECSS标准的总线协议设计，并说明了协议的应用情况.应用该国际通用的标准协议，有助于实现国内航天器姿轨控系统内1553B总线数据协议的标准化，进而提升姿轨控系统体系结构的可集成性、可扩展性、以及星载设备(含软件)的通用化.