三轴稳定卫星无陀螺姿态确定算法研究

针对三轴稳定卫星进行了正常飞行模式下无陀螺姿态确定算法研究，采用磁强计、地球敏感器和太阳敏感器组合获得姿态数据，利用四元数法和高斯－马尔可夫过程建立了姿态确定估计器算法模型。通过数学仿真证明，此姿态确定算法能够对星体姿态进行较精确的估计或校正，满足卫星控制精度要求。     

直升机航姿信号仿真研究及其在电子特设系统综合模拟试验中的应用

本文介绍了某直升机电子特设系统综合模拟试验的直升机运动仿真模型,在此基础上着重对直升机航姿信号两种仿真方法进行了详细的阐述,并对两种方法的仿真试验结果进行了分析比较,指出了各自的优缺点。     

Eruptive prominences as sources of magnetic clouds in the solar wind

Large amounts of coronal material are propelled outward into interplanetary space by Coronal Mass Ejections (CMEs). Thus one might expect to find evidence for expanding flux ropes in the solar wind as well. To prove this assumption magnetic clouds were analyzed and correlated with H-observations of disappearing filaments. When clouds were found to be directly associated with a disappearing filament, the magnetic structure of the cloud was compared with that of the associated filament. Additionally the expansion of magnetic clouds was examined over a wide range of the heliosphere and compared with the expansion observed for erupting prominences.     

卫星姿态跟踪系统的鲁棒控制器设计

研究了具有参数不确定性和外部干扰的卫星姿态跟踪控制问题。针对这一类多输入／多输出不确定非线性系统，提出了一个基于不确定项上界的鲁棒输出跟踪控制器设计方法。应用输入／输出反馈线性化法和李亚普诺夫方法，设计了一个控制律，它可确保系统输出按指数规律跟踪期望输出。该控制器计算简单，易于实现。仿真结果表明：即使系统存在不确定性，仍可在闭环系统中实现精确的姿态控制。     

Observations of loops and prominences

We review recent observations by the Yohkoh-SXT in collaboration with other spacecraft and ground-based observatories of coronal loops and prominences. These new results point to problems that SoHO will be able to address. With a unique combination of rapid-cadence digital imaging (32 s full-disk and 2 s partial-frame images), high spatial resolution (2.5 arcsec pixels), high sensitivity (EM 10⁴² cm^–3), a low-scatter mirror, and large dynamic range, SXT can observe a vast range of targets on the Sun. Over the first 21 months of Yohkoh operations, SXT has taken over one million images of the corona and so is building up an invaluable long-term database on the large-scale corona and loop geometry. The most striking thing about the SXT images is the range of loop sizes and shapes. The active regions are a bright tangle of magnetic field lines, surrounded by a network of large-scale quiet-Sun loops stretching over distances in excess of 10⁵ km. The cross-section of most loops seems to be constant. Loops displaying significant increase in the ratio of the footpoint to loop-top diameter () are the exception, not the rule, implying the presence of widespread currents in the corona.All magnetic structures show changes. Time scales range from seconds to months. The question of how these structures are formed, become filled with hot plasma, and are maintained is still open. While we see the propagation of brightenings along the length of active-region loops and in X-ray jets with velocities of several hundred km/s, much higher velocities are seen in the quiet Sun. In XBP flares, for example, velocities of over 1000 km/s are common. Active-region loops seem to be in constant motion, moving slowly outward, carrying plasma with them. During flares, loops often produce localized brightenings at the base and later at the apex of the loop. Quiescent filaments and prominences have been observed regularly. Their coronal manifestation seems to be an extended arcade of loops overlying the filament. Reliable alignment of the ground-based data with the X-ray images make it possible to make a detailed intercomparison of the hot and cold plasma structures over extended periods. Hence we are able to follow the long-term evolution of these structures and see how they become destabilized and erupt.     

Orientations of LASCO Halo CMEs and their connection to the flux rope structure of interplanetary CMEs

Coronal mass ejections (CMEs) observed near the Sun via LASCO coronographic imaging are the most important solar drivers of geomagnetic storms. ICMEs, their interplanetary, near-Earth counterparts, can be detected in situ, for example, by the Wind and ACE spacecraft. An ICME usually exhibits a complex structure that very often includes a magnetic cloud (MC). They can be commonly modelled as magnetic flux ropes and there is observational evidence to expect that the orientation of a halo CME elongation corresponds to the orientation of the flux rope. In this study, we compare orientations of elongated CME halos and the corresponding MCs, measured by Wind and ACE spacecraft. We characterize the MC structures by using the Grad–Shafranov reconstruction technique and three MC fitting methods to obtain their axis directions. The CME tilt angles and MC fitted axis angles were compared without taking into account handedness of the underlying flux rope field and the polarity of its axial field. We report that for about 64% of CME–MC events, we found a good correspondence between the orientation angles implying that for the majority of interplanetary ejecta their orientations do not change significantly (less than 45 deg rotation) while travelling from the Sun to the near-Earth environment.     

Application of improved active disturbance rejection control algorithm in tilt quad rotor

The Tilt Quad Rotor (TQR) has complex dynamics characteristics, especially in conversion mode. It is difficult to build the dynamic model of the TQR and the environmental factors have a great influence on it. To solve the problem of control in conversion mode of TQR, this paper carries out the design of the controller based on improved Active Disturbance Rejection Control (ADRC). According to the characteristics of flight in conversion mode, Tracking Differentiator (TD) with explicit model is used to solve the problem of multiple integrals when the system is high-order system. Extended State Observer (ESO) with Radial Basis Function (RBF) neural network is used to estimate and compensate for internal and external uncertainties, and the adaptive sliding mode control in Nonlinear State Error Feedback (NLSEF) is used to improve the response speed of the controller and reduce the parameters which should be tuned. Through the flight control simulation of the TQR, the validity and rationality of the control system are verified.     

磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

基于干扰观测器的天基观测航天器姿态控制设计

与地基空间目标监视系统相比,天基观测系统具有监视范围广,不受国界限制,观测精度高等优点,是未来空间目标观测技术的重要发展方向。但天基观测航天器工作时,相机转台的运动,太阳能帆板挠性部件的弹性振动与航天器的姿态运动相互影响,构成强耦合的非线性系统,传统的控制方案无法实现对这类天基观测航天器的高精度姿态控制。文章针对某一空间观测航天器的任务要求,设计了基于干扰观测器的前馈补偿航天器姿态控制系统,仿真实验结果表明:姿态角控制精度小于 0.06°,姿态角速度精度小于 0.03(°)/s,达到了精度要求。