K8、JK8机翼接头与检验量规协调准确度的提高

分析了 K8、 JL8机翼接头孔精加加后与检验量规位置协调的条件，介绍了为提高它们之间协调准确度所采取的措施及其效果。     

燃气的基准表及图制定

本文在阐述基准的热力学概念基础上,提出了燃气基准的计算方法,应用CHAPPELL推荐的有关燃气热力性质表达式,导出计算燃气基准的公式,通过微机计算,将结果整理成燃气基准的有关表、图。     

40Gb/s系统技术解决方案探讨

40Gh／8系统的应用面临光信号的色散、衰减、交换、编码等方面技术的挑战。利用固定补偿模块或源色散补偿技术可以实现光的精确色散及补偿。赖曼式放大器对40Gh／s系统的光传输提供了有力的技术支持，利用赖曼放大器以及全光交换机或光电光交换机则可以实现光信号的有效放大和高性能交换，而带外FEC技术和相应的编码技术可以进一步提高系统的容错能力及传输速率。     

CAD/CAPP集成系统中工序图的自动生成方法

介绍了一种在CAD/CAPP集成系统中工序图自动生成的较通用的方法,提出了两种不同实现途径。并以实例表明在Pro/Engineer系统中得到了成功应用。     

电泵起停控制与电机多功能保护电路

某些场合，电泵要在特殊的环境和条件下长期连续的工作，因此配置特殊的起停控制电路和保护电路是完全必要的，所以设计了本文介绍的电泵起停控制与多功能保护电路。电路主要由集成件构成。文中扼要介绍的是电泵欠载延时断电保护，过载分级延时断电保护电路，以及欠载停机后延时自动再起动电路。     

Aiming at a 1-cm Orbit for Low Earth Orbiters: Reduced-Dynamic and Kinematic Precise Orbit Determination

The computation of high-accuracy orbits is a prerequisite for the success of Low Earth Orbiter (LEO) missions such as CHAMP, GRACE and GOCE. The mission objectives of these satellites cannot be reached without computing orbits with an accuracy at the few cm level. Such a level of accuracy might be achieved with the techniques of reduced-dynamic and kinematic precise orbit determination (POD) assuming continuous Satellite-to-Satellite Tracking (SST) by the Global Positioning System (GPS). Both techniques have reached a high level of maturity and have been successfully applied to missions in the past, for example to TOPEX/POSEIDON (T/P), leading to (sub-)decimeter orbit accuracy. New LEO gravity missions are (to be) equipped with advanced GPS receivers promising to provide very high quality SST observations thereby opening the possibility for computing cm-level accuracy orbits. The computation of orbits at this accuracy level does not only require high-quality GPS receivers, but also advanced and demanding observation preprocessing and correction algorithms. Moreover, sophisticated parameter estimation schemes need to be adapted and extended to allow the computation of such orbits. Finally, reliable methods need to be employed for assessing the orbit quality and providing feedback to the different processing steps in the orbit computation process. This revised version was published online in August 2006 with corrections to the Cover Date.     

Tunnel/predictor display with two-axis control coordination and simplification

A longitudinal-lateral control coordination and simplification concept is considered for a tunnel/predictor display, which presents the command flight path and a specified future aircraft position in a 3-dimensional format to the pilot, for improving flight path control. A basic element of the proposed concept is the generation of common longitudinal-lateral transfer characteristics of the predictor-aircraft system for the crossover frequency region. Control coordination is supported by a dynamics similarity between the longitudinal and the lateral response characteristics of the predictor position in closed-loop pilot control actions. The control coordination and simplification concept is considered to support the pilot in manual flight path control, directed at an enhancement of his control performance and at a reduction of his workload. Results from pilot-in-the-loop simulation experiments support the theoretical findings and show the effectiveness of the proposed predictor concept with control coordination.     

基于Pro/E软件的卫星三维建模方法的探讨

主要对基于Pro/E软件的卫星三维建模和高效率、高可靠性、低成本的总装设计方法等进行了初步的研究和探讨。     

卫星交会的自主导航技术

论述卫星交会自主导航的飞行任务背景和概念 ,综述国内外学者正在进行探索研究的思路 ,以期引起国内学者的的注意、探讨和深入研究。     

多向编织碳／碳复合材料力学行为研究

本文综述了作者近十年来在多向编织碳／碳复合材料力学性能研究方面的成果，包括力学模型与强度准则、热应力分析、断裂行为、性能预报与优化设计、超高温试验技术及组织性能与高温退化等内容，并分析了其存在的新问题和解决途径。