基于渐消卡尔曼滤波器的定位系统设计

针对无人机捷联式惯性导航系统(Strap-down inertial navigation system,SINS)定位精度低、全球卫星定位系统(Global position system,GPS)定位的非自主性,建立了一种无人机SINS/GPS定位信息融合系统。采用渐消Kalman滤波技术,有效防止了SINS/GPS组合导航系统的滤波发散。采用自适应运算法则,从理论上证明了渐消卡尔曼滤波器的稳定性,得到了滤波器稳定要求的新的条件,与以往研究比较,条件更为宽泛。分别进行了SINS/GPS常规卡尔曼滤波仿真和渐消卡尔曼滤波仿真,结果表明:采用渐消卡尔曼滤波技术在工程实践上可以有效提高无人机的导航定位精度,并且易于工程实现。     

AP/HTPB复合推进剂燃烧的详细化学动力学建模(英文)

采用详细化学动力学机理,为AP/HTPB复合推进剂的燃烧建立了模型。该模型包含2个步骤:前一个是数据准备阶段,后一个是求解阶段。模型中包含了完整的固相、凝相和气相三相反应机理,其中气相反应机理由37个组分和127个反应步组成。为了提高模型的求解效率,用于评估化学反应的先进算法ISAT也被应用。最终,通过与试验结果的比较可看到,所建模型是可靠和精确的,并优于以往模型。     

基于车辆定位的北京公交智能调度指挥系统

介绍了先进的北京市公共交通智能调度指挥系统 ,包括其各个子系统。着重描述其中的公交车辆定位系统 ,该系统采用高精度的差分 GPS、无线数据传输和话音调度 ,利用已有的模拟集群通信系统 ,终端显示为先进的地理信息系统。整个系统将给调度员提供方便、直观、含位置及状态的全方位车辆信息 ,提高公共交通运营的效率     

基于Web方式下的信息管理系统的开发

本文介绍了一个基于Web方式下信息信息管理系统的开发实例，重点阐述了Web方式下信息管理系统的设计思想以及及关键技术的实现     

CAD／CAM技术在飞机模型制作中的应用

以CAD／CAM软件为依托,对飞机模型的传统做法进行了较大幅度改革。将以前的制作过程,整合成测绘、CAD造型、CAM加工的综合性项目,让学生在制作过程中能够自主创新,也能够更加紧密结合工程实践。     

A review of friction stir joining of SiCp/Al composites

SiCp/Al composites have excellent comprehensive properties and have been widely used in aerospace, automotive industry and other fields. Due to the huge difference in performance between SiC particles and matrix alloys, traditional fusion welding methods are difficult to meet the join requirements of SiCp/Al composites. Friction stir joining (friction stir welding), as a solid phase joining process, has been proved to be a new technology with fine prospect in joining SiCp/Al composites compared with fusion welding process. Although some progress has been made in recent years, there are still full of challenges. In this paper, the research status of friction stir joining of SiCp/Al composites in recent years is expatiated, including the weldability of SiCp/Al composites, the macrostructure and the microstructure of joints, mechanical properties of joints, and tool wear and monitoring. Furthermore, the existing challenges of friction stir joining of SiCp/Al composites are summarized and the future development directions are prospected.     

50吨级氢氧火箭发动机的设计与研制

系统性地回顾了长征五号运载火箭芯一级50t级氢氧火箭发动机YF-77的设计与研制历程。通过分析氢氧发动机的特点以及国内外氢氧发动机的发展现状,阐述了国内新一代运载火箭研发的技术路线和50t级氢氧火箭发动机的研制背景;对50t级氢氧火箭发动机的总体技术方案及其特点进行了分析与总结,并在此基础上对发动机主要组件的技术方案及其特点开展分析;对发动机热试车情况、可靠性验证情况和故障排除情况进行了分析;对50t级氢氧火箭发动机的研制情况、技术特点进行了总结,并对国内氢氧发动机和液氧/甲烷发动机的发展进行了展望。     

一类隔离驱动电路的“剩余驱动”问题

讨论直流变换器中将脉宽调制器（PWM）输出与受控MOS管栅极连接的一类开关驱动电路.专注于分析它在PWM电路关闭后对栅极产生的驱动信号,被命名为＂剩余驱动＂.描述这类剩余驱动的电气特性,说明它对变换器造成的危险,提出改进这类驱动电路以消除这些危险的4种方法.     

Eliminating negative VTEC in global ionosphere maps using inequality-constrained least squares

Currently, ground-based Global Navigation Satellite System (GNSS) stations of the International GNSS Service (IGS) are distributed unevenly around the world. Most of them are located on the mainland, while only a small part of them are scattered on some islands in the oceans. As a consequence, many unreasonable zero values (in fact negative values) appear in Vertical Total Electron Content (VTEC) of European Space Agency (ESA) and Center for Orbit Determination in Europe (CODE) IONEX products, especially in 2008 and 2009 when the solar activities were rather quiet. To improve this situation, we directly implement non-negative physical constraints of ionosphere for global ionosphere maps (GIM) with spherical harmonic functions. Mathematically, we propose an inequality-constrained least squares method by imposing non-negative inequality constraints in the areas where negative VTEC values may occur to reconstruct GIM models. We then apply the new method to process the IGS data in 2008. The results have shown that the new algorithm efficiently eliminates the unwanted behavior of negative VTEC values, which could otherwise often be seen in the current CODE and ESA GIM products in both middle and high latitude areas of the Southern Hemisphere (45°S∼90°S) and the Northern Hemisphere (50°N∼90°N). About 64% of GPS receivers’ DCBs have been significantly improved. Finally, we compare the GIM results between with and without the inequality constraints, which has clearly shown that the GIM result with inequality constraints is significantly better than that without the inequality constraints. The inequality-constrained GIM result is also highly consistent with the final IGS products in terms of root mean squared (RMS) and mean VTEC.     

基于网络的可重构电火花线切割CAD/CAM系统研究

针时线切割行业的特点，给出了一种切实可行的基于网络的线切割CAD／CAM系统开发方案，该系统分为可重构的客户端软件和可伸缩的服务器端软件两部分。文中对系统的体系结构、客户端软件的重构、工艺数据库以及服务器载荷的平衡、网络流量的控制等相关技术进行了研究和探讨，并对相关技术进行了验证，结果表明开发方案和其中采用的技术是可行的和有效的。