基于零J_2摄动条件的近圆轨道编队保持双脉冲最优控制方法研究

重点研究了考虑J2摄动作用的近圆轨道编队构形保持双脉冲最优控制策略.利用轨道要素法建立了考虑J2摄动作用影响的相对运动方程,推导了消除相对摄动影响长期项的零J2摄动条件,并利用该条件对C-W方程得到的编队初始条件进行了修正,得到了对J2摄动不太敏感的相对轨道.然后,基于C-W方程建立了编队保持双冲量最优控制模型,并利用非线性规划方法得到了编队保持所需的最优控制脉冲.仿真结果表明,J2项摄动对相对运动的破坏作用明显减小,提出的双脉冲最优控制方法能够有效实现编队保持的高精度控制.     

基于JXTA的CBM系统模型研究与设计

随着机械设备复杂程度的提高,设备的维护和故障检修变得十分困难。为提高机械设备的维护效率,降低维护成本,研究了采用JXTA技术实现一种P2P网络结构的通用CBM故障监测诊断系统,并给出了系统的总体结构及功能模型。整个系统具有很强的灵活性,可以针对不同设备进行具体地定制和设计。     

溶胶-凝胶法制备复合材料用氧化铝基体及涂层研究

采用溶胶—凝胶法,分别研究了用三种起始物异丙醇铝［Ａｌ（ＯＣ３Ｈ７ｉ）３］、氯化铝（ＡｌＣｌ３·６Ｈ２Ｏ）、硝酸铝［Ａｌ（ＮＯ３）３·９Ｈ２Ｏ）］,制备碳纤维三维编织物增强复合材料用氧化铝基体及涂层的工艺,考察了三种体系反应物配比、水解温度、反应时间等因素对制得的三种溶胶体系性能的影响,获得了较佳的溶胶配制参数;还考察了三种溶胶体系在通常情况下和在编织物中的凝胶化情况,获得了较佳的凝胶化条件;同时还研究了不同条件下三种凝胶的裂解产物及其晶体类型。结果表明,不管经过何种途径,凝胶在经１２６０℃裂解后均可获得α－Ａｌ２Ｏ３。     

低纬电离层f0F2夜间增强的模拟研究

以太阳活动低年冬季为代表,利用二维中低纬电离层理论模式模拟低纬电离层ｆ０Ｆ２夜间增强现象,探索在赤道异常驼峰纬度附近形成该现象的可能因素或物理机制,模式在给定磁子午面内解等离子体输运方程,给出电子及各离子的浓度,速度的时空分布。在所考察条件下,低纬驼峰纬度附近ｆ０Ｆ２模式值夜间出现了明显的增强特征。     

Microstructure and Properties of Low-pressure Cold Sprayed Al-based Composite Coatings on Magnesium Alloy Surface

Pure Al and Al-30% Al2O3 composite coatings are prepared on the surface of AZ31B magnesium alloy by low-pressure cold spraying. The morphology and structure of the coatings are analyzed by scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD), and the effects of the addition of Al2O3 on the microstructure of the Al-based coatings are discussed. The mechanical properties and corrosion resistance of the coatings are fully evaluated by the micro-hardness tester, electronic tensile machine, and electrochemical workstation. The results show that the coating structure is more uniform and denser, and the porosity is significantly reduced after the addition of Al2O3. The interfaces between the coatings and the magnesium alloy substrate are distinct, and the coatings and the substrate are mechanically combined. Compared with the pure Al coating, the microhardness of the Al-Al2O3 composite coating is increased to 61.1 HV0.2, and the bonding strength reaches above 53.1 MPa. The self-corrosion potential of the two coatings is higher than that of the magnesium alloy, and the self-corrosion current density is significantly lower than that of the magnesium alloy substrate. The Al-based coatings prepared by low-pressure cold spraying have high hardness, good bonding strength, and good corrosion resistance, which can be used for the repair and protection of magnesium alloy structural parts.     

电子束增材制造γ-TiAl显微组织调控与拉伸性能研究

研究了电子束选区熔化增材制造Ti-48A1-2Cr-2Nb合金的显微组织与拉伸性能.A1含量的烧损导致显微组织呈现不均匀性,沉积态材料由较大的γ晶粒和被α2晶粒钉扎的链状细小γ晶粒组成.γ相占据89％的体积,但并未显示出明显织构;而α2相显示出14.1倍随机值的(0001)织构,其c轴与沉积方向平行.沉积态材料的室温抗拉强度达到503MPa,而塑性为0.热等静压与热处理后的材料强度稍有下降,但延伸率获得较大改善.直到800℃,双态组织TiAl-4822材料的抗拉强度仍在460MPa以上,而全片层组织材料则维持在400MPa以上.     

原位自生TiB_2/Al复合材料磨削表面质量研究

原位自生TiB_2/Al复合材料具有密度小,比强度高,比模量大等特点,在航空航天领域具有广泛的应用前景。为探索原位自生TiB_2/Al复合材料的磨削加工性能,选用单晶刚玉SA砂轮、白刚玉WA砂轮和CBN砂轮在不同磨削参数下对TiB_2/Al复合材料进行磨削试验。首先研究了砂轮材质、转速、工件速度、磨削深度对工件表面粗糙度的影响规律;其次通过对工件表面形貌、磨屑形态、砂轮磨损的观测分析,探索了原位自生TiB_2/Al复合材料磨削表面成形机制;最后基于试验数据,给出了TiB_2/Al复合材料磨削工艺参数优选域。本研究可为颗粒增强金属基复合材料磨削加工提供基础理论支撑。     

2D-C_f/SiC复合材料蠕变断裂及损伤机理研究

研究了2D-C_f/Si C复合材料在空气中,温度分别为700℃和900℃,蠕变应力分别为50MPa、75MPa和100MPa条件下的蠕变断裂及损伤机理。运用拉森-米勒参数法拟合材料的蠕变断裂时间,使用扫描电子显微镜分析其微观组织和断口形貌以进一步揭示其蠕变断裂机理。结果表明:2D-C_f/Si C复合材料的蠕变断裂寿命与温度和应力密切相关,较高温度或应力会降低材料的蠕变断裂寿命;在蠕变过程中,材料除发生应力损伤外,还会发生氧化损伤;2D-C_f/Si C复合材料的氧化损伤比应力损伤对蠕变断裂时间有更显著的影响。     

Theoretical and experimental investigation on novel 2D maglev servo proportional valve

This paper presents a novel two-dimensional maglev servo proportional cartridge valve (2D maglev valve), where a contactless maglev coupling is introduced between electro-mechanical converter and valve body to realize functions of force transmission, spool position feedback and linear-rotary motion conversion. Such configuration can effectively reduce cost of both valve manufacturing and electro-mechanical converter, while still maintain features of 2D valve such as null pilot leakage, high power-to- weight ratio and excellent anti-pollution capacity. Firstly, the characteristic equation of the valve is derived using linear theory, and the stability criterion is established for parameter determination. The influences of crucial structural parameters such as initial height of overlapping area, width of high-pressure and low-pressure holes, acting radius of magnetic force, pitch angle of maglev coupling, length of sensitive chamber and system pressure on the dynamic response are investigated based on AMESim numerical simulation. The prototype valve is then designed and manufactured and a special test rig is built. The no-load flow characteristic, load flow characteristic, leakage characteristic, amplitude and phase frequency characteristics and step response under different system pressures are measured. The experimental results are in a good agreement with the simulated analysis. As an over-damped system, the prototype valve has excellent working stability, which can reach a no-load flow rate of 105.9 L/min with hysteresis of 3.51%, amplitude bandwidth of 28.7 Hz and phase bandwidth of 42.8 Hz under 21 MPa. The research indicates that the 2D maglev valve can be a potential solution of flow rate control valve for flight control surface system of civil aircraft with high pressure and large flow rate application.     

一种二维展开太阳翼的展开动力学仿真分析

在介绍一种二维展开太阳翼构型及组成的基础上,用ADAMS软件建立了二维展开太阳翼柔性动力学仿真模型,模型中为模拟太阳翼驱动装置(SADA)的保持力矩,在SADA上设置了摩擦阻力矩。仿真结果表明,二维展开太阳翼侧板在空间展开锁定不同步,由此而导致侧板锁定对SADA会产生多次冲击。此结论可为二维太阳翼的构型及其铰链设计,以及SADA在轨控制策略提供参考和借鉴。