带旋转修正的弹簧-TFI混合动网格方法

网格存在大变形时,传统的超限插值(TFI)动网格方法易于引起网格正交性问题.依据几何关系并考虑其插值特点,提出了一种带旋转修正的TFI动网格方法.对结构网格块进行分块,在子块角点间建立弹簧元,并基于弹簧类比法计算角点位移;子网格内部结点位移采用修正后的TFI动网格方法进行计算,从而形成具有弹簧-TFI混合特征的动网格新...     

细长旋成体大迎角俯仰振荡的数值研究

为研究俯仰振荡对细长旋成体流场与气动特性的影响,利用雷诺平均方法与大涡模拟的混合方法相结合的脱体涡模拟方法对大迎角下细长旋成体俯仰运动进行了数值模拟研究。通过对背风面分离涡的强度和位置、细长体绕流形态、截面压强系数和侧向力系数的观察和分析,发现施加小振幅、特定频率的俯仰振荡对大迎角细长旋成体背风面流场有明显的控制能力,...     

Designing method of acceleration and deceleration control schedule for variable cycle engine

Studies show that different geometries of a Variable Cycle Engine (VCE) can be adjusted during the transient stage of the engine operation to improve the engine performance. However, this improvement increases the complexity of the acceleration and deceleration control schedule. In order to resolve this problem, the Transient-state Reverse Method (TRM) is established in the present study based on the Steady-state Reverse Method (SRM) and the Virtual Power Extraction Method (VPEM). The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE. Obtained results are compared with the conventional component-based model from different aspects, including the accuracy and the convergence rate. The TRM is then employed to optimize the control schedule of a VCE. Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model. On the other hand, it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45% and 54%, respectively. Meanwhile, the surge margin of compressors, fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria. It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.     

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.     

基于矩化GO法的某型电动飞机扰流板系统可靠性

扰流板冗余系统提升了新能源电动飞机的可靠性。采用GO法建立电动飞机扰流板系统可靠性模型,设计SIMULINK仿真界面,针对操作符11给出一种新的运算模块。针对扰流板冗余系统设计一种矩化操作符,给出运算流程,有效减少传统GO法在冗余系统建模工作量,利用故障树分析法对结果进行验证。结果表明,本文提出的方法切实可行,为新能源电动飞机扰流板系统可靠性分析提供了新的思路。     

管中激光加速器的推力形成过程

管中激光加速器是一种新型的激光推力器,弹射体在管道中被加速。利用光线追踪法,根据光线在网格中的传播路径信息,运用辐射输运方程,得到流场的能量源项;数值求解含能量源项的流体控制方程,对管道中等离子体流场激波的形成和演化过程进行了研究。模型能够模拟空气光学击穿、空气对激光能量的吸收、等离子体对激光的屏蔽作用和推力形成过程,通过计算得到冲量耦合系数为3.61×10-4N/MW,等离子体内能转化为流场动能的比例约为9%。     

Mesh-dependence of Material with Softening Behavior

The issue of mesh-dependence emerges when the conventional continuum damage model is applied to handling the softening behavior. In order to circumvent the mesh-dependence, the non-local theory is introduced into the conventional damage model and the finite element formulas are derived for two-dimensional gradient-enhanced damage model. A new element is proposed in which the basic unknown quantities are displacement, non-local equivalent strain and the gradient of non-local equivalent strain. The element and constitutive equation proposed in this article are added to the finite element software ABAQUS through user subroutine UEL. Numerical results show that the gradient-enhanced damage model can eliminate the mesh-dependence and is effective for dealing with the issue of softening behavior.     

航空发动机非线性模型实时计算的迭代方法研究

针对航空发动机非线性模型将作为未来机载应用而需要严格实时性的问题,研究了求解模型的迭代方法,综述其历史发展情况,并讨论收敛性问题,同时提出一种改进应用方案,即模型在过渡态仿真时可将上一状态点雅可比矩阵直接应用于下一点计算,能够在典型应用方案基础上直接减少气动热力模型计算次数,从而提高整体模型执行效率.通过实际算例对这些应用方案进行仿真比较与分析,结果表明:①Broy-den秩1法执行效率最高,更适宜用于模型实时计算;②改进应用方案简单、有效,为进一步满足非线性模型的严格实时性要求奠定基础.      

翼尖装置优化设计研究

使用面元法气动分析软件VSAERO对机翼与翼梢小翼组合体模型进行数值模拟,并采用Steve Smith提出的诱导阻力优化方法对翼梢小翼的定位进行优化设计。结果表明,能够有效地预测出翼梢小翼的最优定位,在翼梢小翼优化设计中具有很好的适用性。     

止裂孔尺寸对止裂效果影响的研究

当航空器结构在航线使用过程中出现疲劳裂纹损伤时,通常在裂纹尖端打止裂孔进行临时性修理。通过理论分析和计算及试验分析,研究了止裂孔尺寸对止裂效果的影响。结果表明,当航空器结构出现疲劳裂纹损伤时,采用5.57～7.14mm直径的止裂孔进行止裂修理,止裂效果较好;当止裂孔直径为6.35mm时,止裂效果最好。