嫦娥探测器分段渐倾转移机构设计

巡视探测器转移机构是在地外空间环境执行巡视探测器转移释放任务的空间机构。与美国、苏联转移任务不同,中国探月工程（CLEP）二期着陆器采用腿式着陆缓冲机构及巡视器顶部搭载方式,转移任务沿着陆器周向展开距离及巡视器释放高度增加,转移难度增大。在设计阶段,转移机构是否符合探测任务严苛的工程约束及设计指标;在执行阶段,转移机构能否在月面非确知环境下正常展开、转移过程是否稳定可靠,是嫦娥探测器顺利完成探测任务的关键。为保障月球后续任务及火星探测任务中转移机构的设计需要,根据巡视器转移系统特点,以探月二期工程中首次探索并成功自主设计定型的嫦娥分段渐倾转移机构为例,对巡视器转移系统的组成、任务需求及设计约束予以阐述,并结合参研人员经验,对机构研制方案的选取、关键环节设计、工程状态及任务验证情况进行说明,以为后续工作及相关工程提供参考。     

月球着陆器最终下降段的制导与控制方法研究

对月球着陆器从约100m到30m之间高度的最终下降段的制导与控制方法进行了研究。提出了一种保证推力有界的简单制导方案,并从理论上严格证明了制导与姿态控制系统的几乎全局渐近稳定的性质。本文的创新之处在于：设计了嵌套饱和函数形式的特殊制导律,该制导律不仅满足主推力有界和可以防止姿态控制中的奇异问题,而且具有形式更为简单和调节着陆器的最大允许偏斜角等优点;得益于制导律的嵌套饱和函数形式,证明了目标角速度的全局有界性质,从而可以获得姿态子系统相对于制导子系统的分离性质。     

“嫦娥一号”卫星的调相轨道设计

中国第一颗月球探测卫星"嫦娥一号"的飞行轨道的设计中采用了调相轨道,在"长征三号甲"运载火箭提供的超地球同步转移轨道与地月转移轨道之间增加了一段由周期为24h和48h轨道构成的环绕地球飞行的调相轨道。为了将几条不同的轨道精确地拼接起来,必须考虑地球引力场对轨道的摄动影响。克服这个难点的做法是基于经典的轨道摄动理论,先将整段调相轨道设计为考虑地球引力场J2项影响的平轨道,在与运载的发射轨道拼接时,先将运载的包括短周期摄动的瞬时轨道转换为平轨道,在与地月转移轨道拼接时将调相轨道转换成拼接点的瞬时轨道。由于采用了平轨道的处理方法使得轨道控制策略的表述十分简明并易于操作。     

Progress in China's Lunar Exploration Program

Chang'E-1 and Chang'E-2 of China's Lunar Exploration Program (CLEP) have successfully achieved their mission. At the present time, only Chang'E-3 is still in operation, which was successfully launched on December 2, 2013. Chang'E-3 probe is the third robotic lunar mission of CLEP, which consists of a lander and a rover, with eight payloads on board the spacecraft. Up to December 21, 2015, more than 2.86TB raw data were received from these instruments onboard Chang'E-3 probe. A series of research results have been achieved. This paper gives a detailed introduction to the new scientific results obtained from Chang'E-3 missions.     

Latest Scientific Results of China's Lunar Exploration Program

Through the implementation of China's Lunar Exploration Program (CLEP), a large amount of data has been acquired. This paper will present the latest scientific results based on these data involving the composition, topography, space environment, subsurface structure of the Moon, and asteroid exploration and moon-based observations, etc.     

China's Planning for Deep Space Exploration and Lunar Exploration before 2030

The current lunar exploration has changed from a single scientific exploration to science and resource utilization. On the basis of the previous lunar exploration, Chinese scientists and technical experts have proposed an overall plan to preliminarily build a lunar research station on the lunar South Pole by several missions before 2035, exploring of the moon, as well as the use of lunar platforms and in-site utilization of resources. In addition, China will also explore Mars, asteroids and Jupiter and its moons. This paper briefly introduces the ideas of Chinese scientists and technical experts on the lunar and deep space exploration.     

基于非线性混合模型研究太空风化对月壤光谱的影响

月表太空风化会改变月壤光谱特征, 影响月壤元素遥感反演精度. 研究太空风化对月壤光谱的影响有助于开发月壤成熟度光谱解耦算法, 提高月壤成分遥感反演精度. 直接对比月壤风化前后光谱的变化能最真实反映太空风化对光谱的影响, 但无法获取未风化的月壤样品, 利用实验室模拟方法开展研究也存在缺陷. 本文提出了一种简便的方法来研究太空风化对月壤光谱的影响, 并以月海样品为例进行探讨. 利用Hapke模型对月海样品组成矿物光谱按照实测含量进行非线性混合, 并通过对比混合后的光谱与实测的月壤光谱, 研究太空风化过程对月壤光谱的影响. 研究结果表明, 月壤在遭受太空风化后反射率降低, 波长越短降低越显著; 月壤背景吸收斜率增大, 月壤变得更红, 月壤矿物特征吸收峰深度降低, 光谱对比度变弱, 长波吸收峰(2.0μm附近)深度降低程度超过短波吸收峰(1.0μm附近)深度. 未来在利用遥感技术反演月壤元素含量时, 必须考虑这些因素.     

月球探测器动力下降段最优轨迹参数化方法

为保证月球探测器进入姿态调整段时具有充分的高度与速度余量,本文提出一种基于控制变量参数化的月球探测器动力下降段最优轨迹求解方法。在三维探测器软着陆动力学模型基础上,将月球探测器软着陆制导律设计等效为燃料最优约束下的探测器俯仰角控制问题,利用控制变量参数化(Control Variables Parameterization, CVP)方法将该控制问题中的控制变量与约束条件转化为非线性规划问题求解,并引入时间尺度变换,将着陆时间序列加入待规划参数,进而求得满足精度的最优数值解。蒙特卡罗仿真实验表明,与传统的显式制导律相比,本文提出的参数化制导方法在动力下降段燃料更省,动力下降段的起始高度在±20%范围内波动时,仍能以高精度速度和高度指标完成末制导。     

嫦娥五号月球轨道交会对接远程导引轨道设计与飞行实践

结合月球轨道交会对接任务的特殊性和中国探月工程的实际工程约束,介绍了嫦娥五号任务月球轨道交会对接远程导引轨道设计,包括轨道器调相和上升器远程导引两方面内容,重点介绍了月球轨道交会对接远程导引多脉冲调相轨道方案的选择、标称轨道优化设计、轨控策略和误差分析结果以及实际飞行轨道控制的情况。飞行实践数据分析表明:嫦娥五号任务月球轨道交会对接远程导引轨道设计是正确合理的,实际飞行的速度增量满足推进剂预算的要求,全飞行过程测控条件良好,交班点控制精度完全满足转自主控制的要求,有力保障了交会对接和样品转移的顺利完成。     

Preliminary Scientific Results of Chang'E-1 Lunar Orbiter: Based on Payloads Detection Data in the First Phase

Chang'E-1 lunar Orbiter was launched by Long March 3A rocket from Xichang Satel-lite Launch Center at 18:05BT(Beijing Time) Oct.24,2007.It is the first step of its ambitious three-stage moon program,a new milestone in the Chinese space exploration history.The primary science objectives of Chang'E-1 lunar orbiter are to obtain three-Dimension(3D) stereo images of the lunar surface,to analyze the distribution and abundance of elements on the surface,to investigate the thickness of lunar soil,evaluate helium-3 resources and other characteristics,and to detect the space environment around the moon.To achieve the above four mission objectives,eight sets of scientific instruments are chosen as the payloads of the lunar orbiter,including a CCD stereo camera(CCD),a Sagnac-based interferometer spectrometer(ⅡM),a Laser Altimeter(LAM),a Microwave Radiometer(MRM),a Gamma-Ray Spectrometer(GRS),an X-ray spectrometer(XRS),a High-Energy Particle Detector(HPD),and two Solar Wind Ion Detectors(SWID).The detected data of the payloads show that all payloads work well.This paper introduces the status of payloads in the first phase and preliminary scientific results.