紫外月球敏感器的几个关键问题

论述了紫外月球敏感器的由来和功能,从基本原理、消杂光设计、能量 与孔径选择、月像处理和姿态提取算法、超大视场消杂光等关键问题的解决进行 了阐述,并得出结论。     

基于MDO方法的月球探测卫星总体设计

根据月球探测卫星任务及环境的特点,在将多学科设计优化(MDO)方法用于卫星总体概念阶段的设计。分析了卫星总体设计中轨道设计、卫星设计和发射选择间的耦合关系与协同效应,建立了MDO的简化模型。用单级整体优化策略(AAO)和多岛遗传算法(MIGA)进行优化。算例结果表明,MDO简化模型可有效解决卫星概念设计阶段中的多学科耦合。     

月球探测技术--探测初期测控通信系统

介绍了国外月球探测测控通信系统的发展和现状。在分析我国现有统一S波段(USB)测控通信网和天文甚长基线干涉仪(VLBI)对探测器测控通信支持能力的基础上,提出了利用现有条件实现测控通信的解决方案。比较和分析表明,采用有源天馈网络的实现简单且技术成熟可靠,是一个较优的方案。     

基于天文和陆标观测的月球卫星自主导航方法

随着我国月球探测工程的开展,为弥补地面测控的局限性,月球卫星的自主导航技术已成为     

An ion analyzer for the lunar surface with E-parallel–B

We present a novel instrument concept to measure the energy and mass spectra of ions incident on the lunar surface, based on the E-parallel–B or Thomson-parabola device used extensively as a diagnostic in the plasma fusion community. The Apollo-era Suprathermal Ion Detector Experiment (SIDE) was the first instrument package to perform in-situ measurements of ions incident on the lunar surface. The ions can originate from a variety of sources, including the solar wind, the Earth’s magnetotail, and photoionization of the thin lunar atmosphere. The species and energy distribution of ions arriving at the lunar surface depend in a complicated and poorly-understood fashion on the phase of the lunar day, the position of the Moon with respect to the Earth, and on the local plasma environment.     

Integrity of sulfur concrete subjected to simulated lunar temperature cycles

In view of potential application as a construction material on the lunar surface the mechanical integrity of sulfur concrete was evaluated after being subjected to simulated temperature cycles. Here, small cubes of sulfur concrete were repeatedly cycled between room (20 °C) and liquid nitrogen (−191 °C) temperatures after which they, and non-cycled cubes, were evaluated by compression testing. The compression strength of the non-cycled samples averaged ∼35 MPa (5076 psi) before failing whereas the cycled samples fractured at about 7 MPa (1015 psi). Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate whereas it was seen adhering in those non-cycled. Based on a simple analysis it was concluded that the large strength discrepancy between cycled and non-cycled samples is due to differences between the coefficients of thermal expansion of the materials constituting the concrete.     

Performance of a small and low-cost chamber to simulate lunar surface environment

The performance of a small and low-cost metal chamber built to simulate the pressure and temperature conditions of lunar surface was assessed and the results are presented. This chamber is intended for studying the physical properties of lunar surface and subsurface (using soil simulants) and also to validate the technology readiness of certain newly developed payloads planned for future lunar surface missions (Lander/Rover). It is possible to reach down to ∼10⁻⁷ Pa under specific conditions and maintain the temperature of the sample under investigation to lunar day and night temperatures. The designed system has been subjected to various tests to evaluate its performance and suitability for carrying out experiments in a simulated lunar environment.     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

Energy requirements of a thermally processed ISRU radiation shield for a lunar habitat

The purpose of this study was to establish, on a first principles basis, the order of magnitude of energy requirements for a thermally processed, lunar regolith radiation shield constructed using an in-situ resource utilisation (ISRU) approach. This was done by developing a reference scenario habitat and using thermodynamic relationships and specific heat capacity expressions to determine the energy required to bring such a regolith volume up to sintering temperatures (c. 1,375 K). Once the energy requirements were developed some power system architectures were outlined conceptually and a nuclear power plant of c. 400 kW was suggested as a means to supply the necessary energy. This is well beyond current space nuclear applications. The study concludes that it is likely that the most efficient near-term solution is chemical processing of regolith, from an energy requirements perspective. The technology is also more mature and likely to be delivered on near term projects as it does not require such scaled-up power system architectures. Alternatively, bringing storm shelters up with the habitat to provide a means of weathering major solar events, and adding additional radiation protection to habitat quarters, possibly through a water blanket or similar mechanism, could provide a non-ISRU solution with current technology. However, in the longer term, the development of MW-scale power system architectures (fission, solar etc.), may permit a very large volume of material to be processed thermally for construction material, making a large, permanent human presence on the Moon more easily realisable.     

月球表层采样样品智能确认方法

表层采样是月球采样探测的重要方式，样品智能确认有助于提升工作效率与复杂问题处理能力。结合月球表层采样铲挖工作过程，分析了铲挖过程中臂载相机图像的特点，模仿有人参与识别过程，提出了层次解耦的月球样品智能识别流程，利用深度学习方法构建了一类深度卷积识别网络，完整地描述了图像、特征、标记在网络中的正反传递关系，并在月球表层采样地面试验中进行了验证，结果表明该方法对不同光照、不同背景、不同过程、不同形态的样品，具有较好的泛化识别能力，误识别率优于8.1%，平均单幅识别时间约0.7 s。