Comparative study of lunar mission requirements and onboard propulsion system performance

In recent years, the lunar explorer programs, suspended for a long time, have resumed again with the rapid development of low cost and high-level technologies. As a result, several nations have made a success of lunar exploration programs with their own orbiters. Unlike a satellite orbiting the earth, the optimal design of an onboard propulsion system of a lunar orbiter is a major issue because it is not simple to make the orbiter arrive accurately at another planet far from the earth. Hence, a close attention is required to select and develop an appropriate type of the onboard propulsion system based on given mission requirements of a lunar orbiter. To do this, this study first surveys several lunar orbiters launched since 1990 and their major mission requirements. Then, it summarizes the technical trends of the onboard propulsion systems of the recent lunar orbiters and their key design and performance specifications through trade-off studies. By comparing these features, the present study investigates which lunar mission requirements are critically important, and how they can effect on the overall performance of an onboard propulsion system. Based on these investigations the major objective of the present study intends ultimately to set up a fundamental baseline in selecting and developing an appropriate type of onboard propulsion system of a lunar orbiter.     

光电技术在中国深空探测中的应用

文章简单回顾了中国深空探测已走过的历程和正在进行的项目,展望了今后的发展;分析了深空探测器及其有效栽荷对光电技术的需求;重点对中国已发射的月球探测器"嫦娥一号"、"嫦娥二号"中应用的光电技术和获取的成果,正在研制的"嫦娥三号"探测器中所应用的光电技术,月球探测三期和今后可能发展的深空探测项目中预计采用的光电技术的研制工...     

基于可通过性的月面巡视探测器路径规划算法

应用于行星探测车的路径规划算法需要根据地形环境信息和车体的越障能力两方面进行考虑。结合月面巡视探测器移动子系统的通过特性以及地形信息将地图栅格进一步细分,使用了四个安全性指标描述车体静止或运动时的通过性,并将其引入到A~*与D~*两种规划算法的代价当中,给出了算法的流程,并通过仿真进行了验证。     

月球软着陆器动力学建模研究

建立准确、实用的月球着陆探测器动力学模型,是制导、导航和控制系统方案设计中的首要工作,文中月球软着陆探测器的推进剂贮箱采用横向对称分散布局的形式,并分析了布局方式对液体推进剂晃动的影响;将贮箱内液体考虑一阶弹簧质量模型,应用虚功率原理建立包含液体推进剂晃动的月球软着陆探测器从动力下降段至最终着陆段的动力学模型,并对动力学下降段进行了数值仿真,仿真结果可为月球软着陆探测器控制系统设计提供理论参考。     

利用6S进行月光条件下遥感器信号模拟研究

以太阳为光源的卫星遥感器,可以采用6S或MODTRAN等辐射传输计算软件对其入瞳处的辐亮度进行计算。而在微光或月光条件下,遥感器是对观测目标反射的月亮辐射进行遥感观测,因此在进行辐射传输计算时需要代入月球的辐照度数据。可以利用已公布的月球表面反射率和已知的大气层外太阳辐照度来计算月球辐照度,并对6S辐射传输计算进行适当的修改进行计算。通过对月球辐照度计算原理进行了详细的描述并计算得到了波长在0.250μm~1.500μm范围内的月球表面辐照度,并给出了一个宽波段遥感器的微光动态范围。     

绕月微卫星精确撞月轨道设计

为实现约束条件下的精准可控撞月,提出了基于Lambert问题的精确撞月轨道设计方法.通过求解Lambert问题,可得到撞月轨道轨控时刻的速度脉冲初值解,然后通过打靶法迭代得到撞月轨道的精确解.以"龙江二号"微卫星轨道为例,对撞月点经纬度的覆盖性,以及燃料约束下同一撞月点可行的轨控弧段进行全面分析.最后,通过月球南极水冰...     

月球与深空探测频率规划研究

介绍国际电（ITU）和空间频率协调组（SFGC）关于月球与深空探测频率使用的一些规定和建议,研究国外月球与深空探测频率使用规划和发展趋势,探讨我国月球与深空探测频率使用需求,提出我国月球与深空探测频率建议和发展方向。     

Air-LUSI: A robotic telescope design for lunar spectral measurements

This paper presents the mechanical design of a new robotic telescope that was designed and built to acquire lunar spectral measurements from the science pod of NASA's ER-2 aircraft while flying at an altitude of 70,000 feet (21.34 km). The robotic telescope used a double gimbal design that allowed for target tracking in azimuth and elevation. In addition to the challenging and restrictive geometry of the science pod, each component needed to be carefully selected to ensure that they could withstand the operating conditions at high altitude such as harsh temperatures extending as low as −54 °C and atmospheric pressure less than 1.05 psi (7.23 kPa). Due to the cold temperatures, low atmospheric pressure and the likely exposure to moisture, high strength industrial linear actuators were used to create an adjustable linkage system that controlled the pointing and tracking of the telescope. Although unconventional, this allowed for a robust design that outperformed the team's expectations by tracking the Moon for 40 min with an average tracking error under 0.05°. The results presented within this paper were acquired during a first set of engineering test flights, with further scientific missions to follow.     

Design and experimental performance verification of a thermal property test-bed for lunar drilling exploration

Chinese Chang'e lunar exploration project aims to collect and return subsurface lunar soil samples at a minimum penetration depth of 2 m in 2017. However, in contrast to those on the Earth, automated drilling and sampling missions on the Moon raise the risk of burning bits.Test-beds are required for testing the thermal properties of drill tools in a lunar environment. In this paper, a novel temperature measuring method based on thermocouples and a slip ring was proposed. Furthermore, a data acquisition system for a drilling process was designed. A vacuous,cryogenic, and anhydrous soil environment simulating the lunar surface was established. A drilling test-bed that can reach a depth of 2.2 m was developed. A control strategy based on online monitoring signals was proposed to improve the drilling performance. Vacuum and non-vacuum experiments were performed to test the temperature rising effect on drill tools. When compared with the non-vacuum experiment, the vacuum temperature rise resulted in a 12 °C increase. These experimental results provide significant support for Chinese lunar exploration missions.     

月球探测器软着陆最优末制导策略

在制动火箭推力幅值满足连续可变的前提下,研究了月球探测器软着陆末端的垂直下落过程中的控制问题。基于线性系统跟踪控制理论,利用线性系统中的模型参考跟踪控制的方法设计了一种对指定轨迹进行跟踪的制动方案。同时为了满足耗燃最优性和安全性,根据最优化理论,对控制律中的参数进行优化,最终确定系统的控制律。仿真结果表明该设计方法是简单、有效的。