Solar and Solar-Wind Composition Results from the Genesis Mission

The Genesis mission returned samples of solar wind to Earth in September 2004 for ground-based analyses of solar-wind composition, particularly for isotope ratios. Substrates, consisting mostly of high-purity semiconductor materials, were exposed to the solar wind at L1 from December 2001 to April 2004. In addition to a bulk sample of the solar wind, separate samples of coronal hole (CH), interstream (IS), and coronal mass ejection material were obtained. Although many substrates were broken upon landing due to the failure to deploy the parachute, a number of results have been obtained, and most of the primary science objectives will likely be met. These objectives include He, Ne, Ar, Kr, and Xe isotope ratios in the bulk solar wind and in different solar-wind regimes, and ¹⁵N/¹⁴N and ¹⁸O/¹⁷O/¹⁶O to high precision. The greatest successes to date have been with the noble gases. Light noble gases from bulk solar wind and separate solar-wind regime samples have now been analyzed. Helium results show clear evidence of isotopic fractionation between CH and IS samples, consistent with simplistic Coulomb drag theory predictions of fractionation between the photosphere and different solar-wind regimes, though fractionation by wave heating is also a possible explanation. Neon results from closed system stepped etching of bulk metallic glass have revealed the nature of isotopic fractionation as a function of depth, which in lunar samples have for years deceptively suggested the presence of an additional, energetic component in solar wind trapped in lunar grains and meteorites. Isotope ratios of the heavy noble gases, nitrogen, and oxygen are in the process of being measured.     

航天器太阳电池阵驱动装置的新进展

通常长寿命三轴稳定卫星都采用帆板式太阳电池阵进行能源供应,并使用太阳电池阵驱动装置使电池阵对日定向。国际上从20世纪60年代开始,不断开发研制太阳电池阵驱动装置,以满足在大功率、小型化、适应恶劣环境等方面的特殊需求,经过几代的发展,取得了长足的进步。根据国内收集的相关信息和资料,通过介绍国际该领域的发展及对应需求的典型产品,尝试分析该领域中相应的应用、研究的重点及发展的方向。     

基于FQFD的太阳能无人机设计指标排序方法

为解决太阳能无人机（UAV）总体设计中任务需求表达模糊、技术指标重要度排序决策困难的问题,提出了基于模糊质量功能展开（FQFD）的太阳能无人机总体设计指标排序方法。该方法在传统质量功能展开（QFD）质量屋的基础上,引入三角模糊数,表征任务需求的不确定性和模糊性;在模糊隶属度函数未知的情况下,采用α加权修正水平截集去模糊化方法计算技术指标重要度,获得技术指标重要度排序,为总体设计优化决策提供依据。最后以长航时太阳能无人机的总体设计为例,对任务需求—工程特性—技术指标的两级质量屋模型进行计算分析,得到续航能力、巡航高度、动力系统效率、巡航速度和气动效率是太阳能无人机最重要的5个技术指标的结果。此方法客观性较强,可处理复杂的系统不确定性,为太阳能无人机总体方案设计及决策应用提供参考依据。     

耐温400℃、低损耗改性氰酸酯载体胶膜的制备及性能

采用双酚E型氰酸酯树脂(BECE)和端羟基聚醚砜(Mx)共改性酚醛型氰酸酯树脂(NovolacCE),并将其与石英布复合制备出了一种耐温400℃、低损耗的改性氰酸酯载体胶膜。结果表明,适量的BECE和Mx热混合加入Novolac-CE树脂中,改善了Novolac-CE的浸润性和韧性,其与石英纤维的接触角降至72.8°,冲击韧性提高到13 kJ/m~2。相比于没经过处理的石英布,经过0.5%KH550/乙醇溶液处理的石英布与Novolac-CE树脂间的粘接强度最大提高70%,但是过多的KH550加入影响胶膜的耐热性。胶膜经200℃/4 h固化后,400℃时剪切强度大于5 MPa,且连续使用60 min后强度保持率大于80%,介电损耗为0.014。胶膜具有良好的自黏性并且室温适用期大于15 d,可作为耐高温(400℃)透波粘接材料应用。     

星敏感器在轨光行差修正方法研究

星敏感器作为目前航天器中最重要的姿态测量敏感器,其精度直接影响航天器姿态测量精度,因此对其误差源进行分析和修正则尤为重要。提出了一种星敏感器在轨光行差修正方法,根据光行差产生的原理和特点,将星敏感器沿探测器X和Y方向产生的光行差误差角巧妙地转换为光行差误差四元数,并直接对输出四元数进行修正,从而为修正星敏感器光行差提供了一种方便简洁的方法。     

一种基于方钢管骨架的壁板成型模具

针对大型飞机机身复合材料壁板试验件,从模具的刚度要求、使用要求、成本要求等方面确定了模具设计边界条件;为了满足模具设计的边界条件要求,提出了一种基于方钢管骨架的壁板成型模具。在进行模具设计时,首先对比各种常用模具材料的优缺点并最终确定模具采用“INVAR”钢材料;然后介绍了模具的结构布局和结构尺寸参数,并通过有限元模拟的方法,对模具的整体刚度和起吊工况的强度进行了模拟计算。计算结果表明模具的整体刚度较好,能够满足设计要求。从模具整体刚度和模具重量两方面与框架式隔板模具对比,方钢管骨架的壁板成型模具具有更大的优势。     

燃气轮机燃烧室预混喷嘴排放性能的试验和数值研究

为了研究当量比、值班燃料量和压力对燃气轮机燃烧室预混喷嘴排放指标的影响,在环境压力下按照等速模化原理进行了燃烧室预混喷嘴的燃烧试验,基于化学反应网络法构建了污染物预测模型,开展了试验和数值对比研究。结果表明:在带值班燃料的情况下该预混喷嘴当量比φ在0.35～0.5时可满足国标排放要求,但是值班燃料量增大会使NO_x排放升高;在φ0.4时,压力对纯预混燃烧NO_x生成无影响,φ0.4时,NO_x会随压力升高而增多;带有值班燃料的预混燃烧时,NO_x对压力变化敏感,压力升高导致NO_x增多;该预混喷嘴混合性能对空气流速不敏感、燃料兼容性强,排放达标当量比范围宽,经进一步设计开发后有潜力应用于燃气轮机低排放燃烧室中。该化学反应器网络模型依赖经验较少,当值班燃料比例≤0.17时,对污染物预测与试验数据符合较好。     

The Modulation of Galactic Cosmic Rays in the Heliosphere: Theory and Models

Almost all theoretical and numerical models for the modulation of cosmic ray in the heliosphere are based on Parker's transport equation which contains all the important basic physical processes. The relative importance of the various mechanisms is however not established and may vary significantly over 22 years. The simultaneous measurements of solar wind parameters, heliospheric magnetic field properties and cosmic rays over a wide range of energies and positions in the heliosphere have brought the realization that modulation is much more complicated than what the original drift models predicted. In the process the sophistication of models based on solving Parker's equation has increased by orders of magnitude. A short review of the global modulation of cosmic rays is given from a theoretical and modelling point of view.     

吸附式低反动度超、跨音速轴流压气机气动设计原理及其验证

当增加动叶转角以进一步提升超、跨声速轴流压气机级负荷时,为解决其内部流动问题,提出了吸附式低反动度超、跨声速轴流压气机气动设计原理。分析了在该气动设计原理指导下,级内参数的演变规律与相互影响。利用该气动设计原理完成了一高负荷超声速轴流压气机气动设计,三维粘性数值模拟结果表明,在叶尖切线速度370m/s的前提下,实现了一级压比2.5,效率87%的压气机级设计。      

多螺旋桨太阳能无人机横航向操稳特性研究

首先分析了大型高空长航时太阳能无人机由于超大展弦比和高效多螺旋桨带来的航向阻尼增量和航向操纵导数,接着分析了由此带来的横航向动态特性变化,并结合多螺旋桨的操纵特性,提出了多桨航向控制方法,最后进行了仿真验证.结果表明,分布式多桨布局对提高该类无人机的横航向稳定性有较大作用,以多桨的转速变化量最小为目标的最优化航向控制分配方法对超长航时飞行很有利.