Xilinx SRAM型FPGA抗辐射设计技术研究

针对Xilinx SRAM型FPGA在空间应用中的可行性，分析了Xilinx SRAM型FPGA的结构，以及空间辐射效应对这种结构FPGA的影响，指出SRAM型的FPGA随着工艺水平的提高、器件规模的增大和核电压的降低，抗总剂量效应不断提高，抵抗单粒子效应，尤其是单粒子翻转和单粒子瞬态脉冲的能力降低。分析了FPGA综合后常见的Half-latch在辐射环境中的影响并结合实际工程实践给出了解决上述问题的一些有用办法和注意事项，如，冗余设计、同步设计、算术逻辑运算结果校验、白检等。最后还提出一种基于COTS器件的“由顶到底”的星载信号处理平台结构，分析了这种结构在抵抗辐射效应时的优势。有关FPGA抗辐射的可靠性设计方法已经在某卫星通信载道中成功应用，并通过了各种卫星环境试验，该技术可以为有关航天电子设备设计提供参考。     

空间用功率MOSFET器件2N7266总剂量

文章针对空间用功率MOSFET器件2N7266进行了60Co源γ射线辐射试验研究。在辐射过程中,采用JT-1型晶体管特性图示仪和计算机控制的摄像机实时监测器件电参数随辐射剂量变化的特征,通过试验研究获得了被试器件阈值电压、漏电流和击穿电压随总剂量变化的特征,得出了被试器件抗总剂量辐射的指标。研究结果可为被试器件在航天器型号的使用提供技术参考依据。     

一种低轨双星雷达信号无模糊频差估计算法

针对低轨双星组合接收低脉冲重复频率(LPRF)雷达信号的频差(DFO)估计存在模糊的问题,提出一种基于时差差分的频差无模糊高精度估计算法,该算法通过对高精度的时差测量值进行中心差分获得无模糊的频差估值。仿真结果表明,新算法能对PRF低至300 Hz的雷达信号进行无模糊的频差估计,估计精度在信噪比高于15 dB时逼近克拉美劳下界,可有效扩大低轨双星时/频差定位系统对LPRF信号的适用范围。     

中国运载火箭技术发展

中国航天运输系统建设起步于20世纪60年代,经过近50年的发展,取得了举世瞩目的成就,建设了布局合理、覆盖全面的空间运输系统体系,能够将不同有效载荷发射到低、中、高不同轨道。国际合作方面,在搭载发射、商业卫星发射服务和在轨交付3个方面也取得了一定成绩。对中国航天运输系统发展成就进行了总结,对航天运输系统未来发展特别是人工智能技术应用进行了展望。     

宇航用双极器件和光电耦合器位移损伤试验研究

文章针对器件的位移损伤效应,利用质子加速器产生的质子及反应堆中子对化合物器件和硅器件位移损伤进行试验研究,得到了GaAs光电耦合器的电流传输比(CTR)和硅晶体管电流增益hFE的退化率随等效剂量的变化规律。研究结果表明,在质子70 MeV以上高能量范围,对于硅器件适用的位移损伤等效原理对于GaAs化合物器件则不再适用,需要修正。根据试验数据,给出了经验的修正系数。     

首颗自主地月转移微卫星“龙江二号”

本文对世界首颗独立完成地月转移、近月制动、环月飞行的微卫星“龙江二号”进行了介绍。首先阐述了龙江二号的任务目标和总体方案;然后重点分析了轨道设计与控制、复杂电磁干扰的标定与抑制、宽视场三维基线干涉测量等关键技术难点;接着回顾了任务的实施过程;最后详细介绍了低频射电探测仪、沙特光学相机和VHF/UHF通信模块与学生微型CMOS相机等有效载荷,并展示了上述载荷获取的初步成果。     

Effects of in-track maneuver on Sun illumination conditions of near-circular low Earth orbits

By developing approximate analytical models considering the J₂ perturbation, the effects of an in-track maneuver on the orbital Sun illumination conditions of near-circular low Earth orbits are analyzed. First, two approximate models for the variations in orbital sunshine angles are developed, one for variations at a given time and the other for variations at a given argument of latitude. Next, two approximate models for variations in orbital arc in Earth shadow are developed, one considers the small eccentricity and the other uses the zero eccentricity. Finally, the developed approximate models are applied to analyzing the Sun illumination conditions of a typical in-track maneuver mission on a near-circular low Earth orbit. From the results obtained, three major conclusions can be drawn. First, the variations in orbital sunshine angles at a given time may reach tens of degrees when the drifting time reaches hundreds of orbital periods, and the approximate model for that situation cannot effectively approach the numerical results. Second, the variations in orbital sunshine angles for any given argument of latitude are only a couple of degrees even when the drifting time reaches 500 orbital periods, and the approximation model developed can effectively approach the numerical results. Third, for variations in orbital arc in Earth shadow, the approximate model considering the small eccentricity has simple expressions and can effectively approach the numerical results; in contrast, the approximate model using the zero eccentricity has relatively worse precision.     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

轻质隔热纳米孔结构耐烧蚀酚醛材料

在一定温度下,通过改性剂组分与热固性钡酚醛树脂之间热共聚反应,制备了改性酚醛树脂。采
用模压工艺制备出具有目标尺寸和形状的改性酚醛树脂固化物,对该样品分别进行了400 和700℃的炭化处
理,得到了相应的酚醛炭化样品,并测试其密度、失重率、收缩率等特征参数。研究改性剂用量对碳化物特征参
数和性能的影响,如密度、失重率形貌、比表面积、隔热性能、压缩强度等。SEM 研究表明,700℃炭化后样品形
成了“珊瑚状”碳结构,形成了30 ~150 nm 纳米孔。比表面积测试(BET)结果表明其比表面积可达464 m2 / g。
隔热性能与力学性能的测试结果表明,相对于未改性酚醛树脂碳化物,改性酚醛碳化物的热导率降低了
45． 57%,并且保持了较好的压缩强度。     

One-to-one relationship between low latitude whistlers and conjugate source lightning discharges and their propagation characteristics

One-to-one relation with its causative lightning discharges and propagation features of night-time whistlers recorded at low-latitude station, Allahabad (geomag. lat. 16.05°N, L = 1.08), India, from continuous observations made during 1–7 April, 2011 have been studied. The whistler observations were made using the Automatic Whistler Detector (AWD) system and AWESOME VLF receiver. The causative lightning strikes of whistlers were checked in data provided by World-Wide Lightning Location Network (WWLLN). A total of 32 whistlers were observed out of which 23 were correlated with their causative lightnings in and around the conjugate location (geom. lat. 9.87°S) of Allahabad. A multi-flash whistler is also observed on 1 April with dispersions 15.3, 17.5 and 13.6 s^1/2. About 70% (23 out of 32) whistlers were correlated with the WWLLN detected causative lightnings in the conjugate region which supports the ducted mode of propagation at low latitude. The multi-flash and short whistlers also propagated most likely in the ducted mode to this station.