低空逃逸小RCS目标PD雷达探测技术C

雷达面临的挑战之一是来自于对低空逃逸微弱目标的探测。现代军事逐渐向低空领域扩展,超低空逃逸技术也在日益发展,促使对低空逃逸微弱目标检测技术研究的地位日益提升。雷达对低空微弱目标进行下视探测时,目标的低空和超低空飞行致使雷达接收的回波功率变弱,被淹没在强烈的背景杂波中。与传统脉冲多普勒PD（Pulse-Doppler）雷达不同,合成宽带脉冲多普勒雷达可以同时实现距离和速度的二维高分辨,并且具备良好的相参性和抗干扰性能。针对低空飞行目标的特点进行定性定量分析,对探测所遇到的杂波环境进行仿真验证,提供了一种基于合成宽带脉冲多普勒雷达低空逃逸小雷达截面积RCS目标的探测方法,并对参数设计进行优化分析,降低漏探概率。     

低副瓣有源相控阵天线测试方法研究

利用平面近场测试系统的口面场全息反演功能,摸索出一种低副瓣有源相控阵天线的优化测试方法。实测天线副瓣电平低于-30dB,达到设计指标要求,证明了方法的有效性和适用性,为更快更好完成有源相控阵天线的研制提供了技术手段。     

轨／姿控发动机脉冲后效冲量快速算法的研究及应用

轨／姿控发动机脉冲性能需在地面高空模拟试验中进行考核,试验数据需即时提供,针对脉冲后效冲量的计算,当前方法不能兼顾速率和统计偏差。简述了后效冲量计算要求、高模试验特点、Pacific6000原理及数据文件结构。在分析当前计算方法优缺点基础上,将网络脚本语言的设计思想引入试验数据处理过程,提出了实现数据快速处理的数据流式算法,基于此算法开发了工程应用软件,在实际试验中应用,取得了良好效果。     

一种低轨双星雷达信号无模糊频差估计算法

针对低轨双星组合接收低脉冲重复频率(LPRF)雷达信号的频差(DFO)估计存在模糊的问题,提出一种基于时差差分的频差无模糊高精度估计算法,该算法通过对高精度的时差测量值进行中心差分获得无模糊的频差估值。仿真结果表明,新算法能对PRF低至300 Hz的雷达信号进行无模糊的频差估计,估计精度在信噪比高于15 dB时逼近克拉美劳下界,可有效扩大低轨双星时/频差定位系统对LPRF信号的适用范围。     

Drag derived altitude aided navigation method

The navigation problem of the lifting reentry vehicles has attracted much research interest in the past decade.This paper researches the navigation in the blackout zone during the reentry phase of the aircraft,when the communication signals are attenuated and even interrupted by the blackout zone.However,when calculating altitude,a pure classic inertial navigation algorithm appears imprecise and divergent.In order to obtain a more precise aircraft altitude,this paper applies an integrated navigation method based on inertial navigation algorithms,which uses drag derived altitude to aid the inertial navigation during the blackout zone.This method can overcome the shortcomings of the inertial navigation system and improve the navigation accuracy.To further improve the navigation accuracy,the applicable condition and the main error factors,such as the atmospheric coefficient error and drag coefficient error are analyzed in detail.Then the damping circuit design of the navigation control system and the damping coefficients determination is introduced.The feasibility of the method is verified by the typical reentry trajectory simulation,and the influence of the iterative times on the accuracy is analyzed.Simulation results show that iterative three times achieves the best effect.     

中国运载火箭技术发展

中国航天运输系统建设起步于20世纪60年代,经过近50年的发展,取得了举世瞩目的成就,建设了布局合理、覆盖全面的空间运输系统体系,能够将不同有效载荷发射到低、中、高不同轨道。国际合作方面,在搭载发射、商业卫星发射服务和在轨交付3个方面也取得了一定成绩。对中国航天运输系统发展成就进行了总结,对航天运输系统未来发展特别是人工智能技术应用进行了展望。     

首颗自主地月转移微卫星“龙江二号”

本文对世界首颗独立完成地月转移、近月制动、环月飞行的微卫星“龙江二号”进行了介绍。首先阐述了龙江二号的任务目标和总体方案;然后重点分析了轨道设计与控制、复杂电磁干扰的标定与抑制、宽视场三维基线干涉测量等关键技术难点;接着回顾了任务的实施过程;最后详细介绍了低频射电探测仪、沙特光学相机和VHF/UHF通信模块与学生微型CMOS相机等有效载荷,并展示了上述载荷获取的初步成果。     

Effects of in-track maneuver on Sun illumination conditions of near-circular low Earth orbits

By developing approximate analytical models considering the J₂ perturbation, the effects of an in-track maneuver on the orbital Sun illumination conditions of near-circular low Earth orbits are analyzed. First, two approximate models for the variations in orbital sunshine angles are developed, one for variations at a given time and the other for variations at a given argument of latitude. Next, two approximate models for variations in orbital arc in Earth shadow are developed, one considers the small eccentricity and the other uses the zero eccentricity. Finally, the developed approximate models are applied to analyzing the Sun illumination conditions of a typical in-track maneuver mission on a near-circular low Earth orbit. From the results obtained, three major conclusions can be drawn. First, the variations in orbital sunshine angles at a given time may reach tens of degrees when the drifting time reaches hundreds of orbital periods, and the approximate model for that situation cannot effectively approach the numerical results. Second, the variations in orbital sunshine angles for any given argument of latitude are only a couple of degrees even when the drifting time reaches 500 orbital periods, and the approximation model developed can effectively approach the numerical results. Third, for variations in orbital arc in Earth shadow, the approximate model considering the small eccentricity has simple expressions and can effectively approach the numerical results; in contrast, the approximate model using the zero eccentricity has relatively worse precision.     

New design simulation for a high-altitude dual-balloon system to extend lifetime and improve floating performance

This paper presents a comprehensive simulation for a high-altitude dual-balloon system which consists of zero- and super-pressure balloons. Preliminary calculations were established to describe the basic concept of the new integrated system. A mathematical model was investigated to simulate the ascending and floating processes which considered the atmospheric conditions and thermodynamic variations. Based on the simulation, results showed that the floating altitude stability between daytime and nighttime was improved. This integrated system supports higher floating altitude levels than those of ordinary balloons and extends the lifetime of floating balloon systems. Moreover, results demonstrated that the integrated system was lighter than ordinary balloons, saving useful weight for effective payload. Furthermore, exploiting the advantages of both kinds of balloons while avoiding the difficulties was a significant goal in the current design to promote the floating performance of high-altitude balloons technology.     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.