直升机附件舱温度场的数值模拟

为考查某型直升机附件舱的热控制能力,采用有限元软件分析了其在强制冷却和自然冷却情况下的温度场分布.应用非结构化网格和有限体积法进行计算区域和控制方程的离散,采用标准k-ε模型封闭湍流控制方程.针对3种冷却系统设计方案,分析了不同冷却气流进口尺寸、相对位置以及不同附件散热量对附件舱温度分布的影响,计算了自然冷却情况下附件舱密闭时的温度场.计算和试验结果均表明,所采用的冷却方案可以满足附件舱冷却的需要.      

电脉冲除冰系统的建模与计算分析

电脉冲除冰系统是上世纪80年代以来新兴的飞机用电动-机械式除冰技术,国内关于该方面的研究起步较晚,文中在阐述了电脉冲除冰研究重要性和研究方法后,首先对电容充放电电路进行了分析与设计计算,接着给出电动力学模型,并计算了系统中感兴趣的关键参数,对计算结果进行处理后得到了能够指导设计的重要参数间的关系图,结合工程实例给予了分析与评价,提出了下一步研究解决的问题。     

CE/SE法模拟爆震波点火及传播过程

运用时空守恒元和解元(CE/SE)法模拟一维爆震波的形成及传播过程,分析产生爆震波的不同机理和DDT(爆燃-爆震转捩)过程的影响因素.采取激波点火和热点点火两种点火方式,分别对应SDT(激波-爆震转捩)和DDT过程,热点点火初始场采用线性温度分布和阶梯性温度分布,整个管道均为常压.用隐式梯形方法实现刚性源项积分.结果表明,SDT和DDT对应于不同的爆震波机理,并且DDT受点火区不同参数的影响,为研究爆震波点火和DDT过程提供了理论依据.     

无人机电静液起落架收放及刹车系统仿真研究

无人机起落架收放及刹车系统在无人机的起飞、降落和刹车的过程中发挥着至关重要的作用,随着无人机飞行条件和要求的日益严苛,传统的液压系统已经无法满足需要。电静液系统既保留了传统液压系统的优点,又兼备电作动的优势。根据电静液作动器的工作原理,设计一款无人机起落架收放和刹车功能一体化的电静液系统,将改进型的PID 控制方式运用到起落架收放的控制中,并且设计两种模糊PID 控制方式运用于防滑刹车功能中,在此基础上进行基于AMESim 和MATLAB/Simulink 的联合仿真用于验证系统性能,并对仿真结果进行对比分析。结果表明：模糊PID 的控制方式控制效果良好,可以有效地改善无人机起落架收放和刹车过程的稳定性,使得起落架收放更安全,刹车效率更高。     

机载燃油惰化技术及标准研究

针对目前广泛应用于飞机燃油箱起火和爆炸防护的机载燃油惰化系统,详述了国外机载燃油惰化技术的发展历程,并介绍了国内发展现状,提出影响机载燃油惰化系统设计的关键因素。在此基础上,简述了国内外标准情况,提出了制定我国机载燃油惰化系统标准的建议。     

浅谈基于IPDT的民用飞机重量控制技术

在民机研制过程中,有效地实施重量控制对于项目的成功非常关键。飞机超重不仅会导致设计和运营成本的增加,也将无法实现既定的商载和航程等设计指标。从各部门与重量控制工作的联系出发,结合某型民用飞机的设计实践,介绍了产品联合研发团队(IPDT)模式下重量控制的工作内容、工作流程和常用的减重方法,为民机的重量控制工作提供借鉴和参考。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

飞翼无人机3种保形进气口进气道气动与隐身综合特性对比

基于飞翼布局无人机隐身与结构装载布置要求,保形设计了3种进气口形状的背负式S弯进气道,按照进口投影截面形状上、下底之比顺序排列,分别为三角形、梯形和矩形.利用数值模拟方法对无人机内外流场耦合流动进行计算分析,且基于射线弹跳(SBR)法对进气道电磁散射特性进行仿真研究,获得了飞翼无人机3种进气道的气动与隐身综合特性.研究结果表明:①矩形进气道模型升阻和纵向力矩特性表现均最好;②3种 进气道模型按顺序排列总压恢复系数逐渐增大,畸变指数逐渐减小,进气道沿程气流也逐渐顺畅,矩形进气道模型进气道内流特性最优;③0°迎角下3种进气道模型雷达散射截面(RCS)均值基本呈现先增大后减小的特征,进气道终端开放时矩形进气道模型隐身性能最好,而终端短路时三角形进气道模型隐身效果更优异.      

旋转机翼悬停气动特性研究

鸭式旋转机翼(CRW)是一种先进的高速直升机方案,旋翼同时也是机翼,是其最关键气动部件之一。采用结构分区拼接网格技术进行空间离散,分区建立参考系,通过求解多重参考系下的N-S方程来计算旋翼流场,首先以传统的Caradonna-Tung实验旋翼的亚、跨声速悬停流场分析为例验证该方法的可靠性,进而采用该方法对旋转机翼悬停流场进行了数值计算,旋翼拉力计算值和地面实验值吻合较好,结果分析表明旋转机翼的悬停流场有着不同于传统旋翼的流场特性。