Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

现代飞机俯仰跟踪时诱发振荡预测分析

根据飞机纵向ＰＩＯ的特点，提出了预测分析ＰＩＯ所用的人－机闭环系统数学模型，其中飞机采用等效系统数学模型，驾驶员操纵采用ＭｃＲｕｅｒ模型，参数按地面人－机模拟飞行跟踪试验确定，集中介绍了四种飞机纵向ＰＩＯ预测准则，Ｓｍｉｔｈ－Ｇｅｄｄｅｓ准则，修正带宽准则，增益，相位裕度准则，Ｎｅａｌ－Ｓｍｉｔｈ原则，并提供了相应的计算方法。     

飞机纵向驾驶员诱发振荡灵敏度分析

采用系统灵敏度理论，以修正的带宽准则，增益和相位裕度准则以及Ｎｅａｌ－ｓｍｉｔｈ准则等飞机纵向驾驶员诱发振荡（ＰＩＯ）预测准则作为系统指标，建立了参数变化对诱发振荡预测指标影响的灵敏度公式，以ＪＪ７飞机为例，给出了飞机，操纵系统及驾驶员参数上述指标影响的灵敏度，根据计算结果进行了ＰＩＯ参数敏度预测分析，同时与数值仿真结果进行了对比分析。     

运动单站干涉仪相位差直接定位方法

针对传统干涉仪测向定位在低信噪比(SNR)下性能降低、多频段系统复杂等缺点,本文直接利用运动单站干涉仪模糊相位差(PD)实现对地面静止辐射源定位.为解决该定位问题,结合干涉仪相位差的几何特性,提出了一种多角度距离参数化高斯和滤波(MB-RP-GMF)定位解算方法,利用相位差误差检测获得多个初始方位角,通过距离参数化得到一组滤波初始值,采用扩展卡尔曼滤波(EKF)进行定位计算.仿真结果表明,该定位方法在低信噪比下优于仅测向(BO)定位,且仅采用一组干涉仪便可对多个频段辐射源进行定位.     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

一种尾流消散动态预测的改进算法

尾流间隔是增大跑道容量的主要限制因素之一，为了在保持安全水平的前提下有效地增大跑道容量，可以对尾流消散进行动态预测，并据此缩减尾流间隔。研究了一种尾涡消散动态预测算法，该算法考虑了真实大气的大气分层、湍流、侧风、迎面风、风切变以及地效影响，并用一阶后向差分对该算法进行了离散化改进；在改进算法的基础上，时进近阶段尾流的消散在Matlab中进行了仿真计算；计算结果复现了尾涡的下沉现象和侧风对尾涡传输的线性累积效应。     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

基于自适应深度网络的无人机目标跟踪算法

针对无人机（UAV）视频中目标易受到遮挡、形变、复杂背景干扰等问题，提出一种基于自适应深度网络的无人机目标跟踪算法。首先，基于主成分分析（PCA）和卷积神经网络（CNN）算法，设计3阶的自适应深度网络进行目标特征提取，该网络对图像的H、S、I通道分别进行主成分分析学习，将得到的特征向量输入网络进行分层卷积，优化了网络结构，提高了网络的收敛速度和精度。其次，将目标深度特征输入核相关滤波算法进行目标跟踪，通过分析相邻2帧图像的变化率，采用分段自适应调整学习率的算法进行目标模板更新，有效地改善目标遮挡问题。仿真实验结果表明，该算法有效地避免了复杂因素干扰导致的跟踪精度下降，具有较好的鲁棒性，相较于全卷积跟踪（FCNT）算法平均跟踪精度提高了9.62%，平均跟踪成功率提高了11.9%。     

区域运输规划模型系统

提出一种区域运输规划模型系统,以求从定量的角度,预测一个区域内的货物运输量,继而确定这些运输量对该区域内存在的多种运输方式的偏好结构,最后仿真这些运量在相应的各种运输网络上的分布情况,同时仿真模型还对运输网线路经过新建或扩建后所形成的新的运量分布进行模拟。根据运量分布情况,就可提出初步的规划建设方案。     

一种遥感图像建筑物检测新方法

遥感图像中的建筑物检测对于土地规划和地图绘制等具有重要意义。文章针对高分辨率全色遥感图像植被覆盖中隐蔽建筑物检测问题,提出了一种结合屋顶结构信息和纹理信息的快速房屋检测方法。首先利用屋顶边缘的几何关系寻找具有矩形屋顶的建筑物;然后使用形态学方法提取屋顶较亮的建筑物;最后利用局部二值模式（Local Binary Pattern,LBP）描述屋顶的纹理特征,并利用支持向量机（Support Vector Machine,SVM）排除误检区域。通过在全色遥感图像集上的试验证明,所提方法对高分辨率遥感图像植被覆盖区域中的建筑物目标具有较高检测率和较低误检率。