基于共形天线的捷联被动导引头系统研究

基于共形天线的捷联被动导引头具有结构简单、隐蔽性好等优点，受到了广泛关注。对基于共形天线的捷联被动导引技术进行了研究，对该项技术的原理及关键技术进行了论述。该技术目前还处在研究阶段，有很大的发展空间。     

一类基于四面体组合单元的模块化构架式可展开天线机构

针对现有基于四面体单元的构架式天线机构结构复杂、收拢率低、运动副数量多等问题，基于3RR-3RRR四面体组合单元和基于3RR-3URU四面体对称组合单元分别提出了两种新型模块化可展结构。以3个组合单元组成的模块化结构为分析对象，首先，详细介绍了模块化结构的组成及虎克铰轴线布置，并利用组合单元本身的自由度数目及性质，采用拆杆-等效-复原的思想，应用螺旋理论和G-K公式分别对提出的两种模块化结构进行了自由度分析，得到了自由度数目及性质。其次，应用Adams动力学仿真软件对两种模块化结构进行运动仿真，仿真结果验证了自由度分析的正确性。以完全展开和完全收拢时机构所占的空间体积比值表征该机构的收拢率，计算现有基于四面体单元的非模块化机构与提出的模块化机构的收拢率。最后，对比分析非模块化机构与模块化机构的自由度数目、运动副数目及收拢率。分析结果表明，基于3RR-3URU四面体对称组合单元的模块化结构既能实现较大收拢率，自由度及运动副数目也相对减少，且组成大型天线时杆件类型较少。研究结果为该类模块化构架式可展天线结构的设计与分析提供一定理论依据。     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

Antenna pattern control of planar arrays for long distance communications

As an alternative to standard antennas and due to the advent of low-cost digital processors and materials, adaptive antenna arrays are increasingly considered for applications in long distance communications. The pattern beam control potentialities provide the performance improvement of the communication systems. In this context, this work presents a technique that permits to synthesize the antenna pattern of a planar array. Considering that the relationship between the array factor and the array excitations for the far field region is a Fourier transform in the appropriate variables, the non-uniform sampling procedure is extended for planar arrays. These arrays permit a further control of the antenna pattern since two dimensions of space are used. The technique considers a number of array factor points equal to the array size, which is used to impose appropriated values in the antenna pattern. The produced array factor passes through those points with the desired values, which allows the synthesis of antenna patterns with appropriated characteristics. The theory is presented in order to develop the necessary direct expressions to calculate the array excitation. The array factor can be obtained using the inverse Fourier transform. As application examples, with this technique it is possible to define the level of each sidelobe of the antenna pattern, to control the main beam and to impose nulls in prescribed directions of the pattern.     

线性调节器鲁棒设计法

本文将文献最优控制系统设计加权阵的选择方法推广到鲁棒控制系统设计,进而得到鲁棒控制系统设计的一种新方法。本方法适用于输出反馈系统的最优和鲁棒设计,从而使文献最优全状态反馈系统设计方法成为其一个特例。一个具体实例显示出本方法设计结果具有较文献设计结果较优的性能。     

用于基带雷达引信的平面等角螺旋天线的特性与设计

通常希望一个天线的波瓣图和阻抗能在一个较工的频率范围内保持不变。我们将这一类称为非频变天线。平面等角螺旋天线是一这一类天线的典型例子。本文主要叙述了平面等角螺旋天线的宽频带特性和工作原理，并简要介绍了它的设计方法。     

扇面波导中馈电探针输入电阻数值计算

推导出扇面波导中激励探针的等效输入电阻表达式，探针是伸入波导中的同轴线的内导体，在Ｘ波段，计算了输入电阻值随着探针伸入波导中不同长度的变化。     

用特征根构造变系数线性最佳控制

本文研究单输入n阶常系数线性系统满足二次型指标(积分区间有限,终点给定为(o,…o)) 的最佳控制。所得结果使用户无需解Riccati方程,也不要用数值法解出两点边值问题,仅由这个两点边值问题的特征根即可构造变系数线性最佳控制。这个结果既适于低价(n=1,2,3)时用来写出变系数线性最佳控制的一般表达式(17)—(19),也适于高阶时用计算机计算,其程序已用FORTRAN-Ⅳ在AD三TAMAX-186机上实现。     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.     

面向空间天线的TWF复合材料性能研究

利用碳纤维三向编织物（triaxial woven fabric，TWF）作为增强材料，与柔性基体材料硅橡胶复合，制成兼具一定柔性和刚性的复合材料壳膜结构，用于卫星天线反射器，是一种新型的高精度可展开天线实现方案。采用复合材料细观方法，对碳纤维增强硅橡胶TWF复合材料进行了力学性能的研究。首先由纤维和基体的材料特性得到均质纤维束的材料特性；接下来考虑纤维束交织情况（起伏波动）建立由纤维束组成的单胞实体有限元模型；然后对单胞实体有限元模型进行均匀化分析，施加周期性边界条件，最终得到等效的均质材料特性；为满足天线反射器高性能需求，分析了碳纤维种类、纤维体积分数对单胞等效性能的影响规律。对该材料力学性能的研究，可以为其未来应用于大型高精度可展开天线反射器提供一定的理论依据。