The ground GNSS tomography – unconstrained approach

The GNSS signal along its more than 20,000 km line of sight is bended, attenuated and delayed. These effects are results of the Earth’s atmosphere, and Sun radiation. Amongst all mentioned effects the one considered in this paper is a signal phase delay in troposphere.     

Determination of station positions and velocities from laser ranging observations to Ajisai,Starlette and Stella satellites

The positions and velocities of the four Satellite Laser Ranging (SLR) stations: Yarragadee (7090), Greenbelt (7105), Graz (7839) and Herstmonceux (7840) from 5-year (2001–2005) SLR data of low orbiting satellites (LEO): Ajisai, Starlette and Stella were determined. The orbits of these satellites were computed from the data provided by 20 SLR stations. All orbital computations were performed by means of NASA Goddard’s GEODYN-II program. The geocentric coordinates were transformed to the topocentric North–South, East–West and Vertical components in reference to ITRF2005. The influence of the number of normal points per orbital arc and the empirical acceleration coefficients on the quality of station coordinates was studied. To get standard deviation of the coordinates determination lower than 1 cm, the number of the normal points per site had to be greater than 50. The computed positions and velocities were compared to those derived from LAGEOS-1/LAGEOS-2 data. Three parameters were used for this comparison: station coordinates stability, differences from ITRF2005 positions and velocities. The stability of coordinates of LEO satellites is significantly worse (17.8 mm) than those of LAGEOS (7.6 mm), the better results are for Ajisai (15.4 mm) than for Starlette/Stella (20.4 mm). The difference in positions between the computed values and ITRF2005 were little bit worse for Starlette/Stella (6.6 mm) than for LAGEOS (4.6 mm), the results for Ajisai were five times worse (29.7 mm) probably due to center of mass correction of this satellite. The station velocities with some exceptions were on the same level (≈1 mm/year) for all satellites. The results presented in this work show that results from Starlette/Stella are better than those from Ajisai for station coordinates determination. We can applied the data from LEO satellites, especially Starlette and Stella for determination of the SLR station coordinates but with two times lower accuracy than when using LAGEOS data.     

线性调频半导体激光衍射光栅干涉仪

介绍一种以线性调频半导体激光为光源的衍射光栅干涉仪。激光与光栅上衍射的±１级衍射波会合，由于有光程差而发生光拍频，测量拍频信号的相位移则可测得光栅的位移。设计了一种克服激光波长漂移和空气折射率变化影响的对称差动光路，使这种方法达到实用化的程度，分辨力达到纳米级。此外，还介绍了应用于接触干涉仪的实验情况。     

脉冲激光测距误差标定及不确定度分析CSCD

以脉冲激光测距机的测距误差标定为背景,通过对测距误差解析表达式的推导,给出了系统各不确定度分量对测距误差的影响,计算了信号延迟时间、探测器和激光二极管响应时间、晶振频率、大气折射率等不确定度分量。通过对某已标定激光测距机实验验证表明:该装置在500m^20 000m测距范围内,测量重复性引入的相对标准不确定度最大值为0.67m,满足该类激光测距机测量不确定度5m(k=2)的校准测试需求。因此,利用该解析表达式可以实现对脉冲激光测距误差的有效评估,这对于脉冲激光测距测试系统、脉冲激光测距机的设计具有重要的指导意义。     

翼型舵面偏转非定常流动数值模拟

针对NACA0012翼型舵面偏转问题,数值模拟了不同参数对翼型气动特性的影响。基于非结构动网格技术,采用ALE有限体积描述下的二维可压缩非定常N-S方程,计算通量采用Vanleer格式、时空二阶格式,利用Venkatakrishnan限制器抑制数值振荡。非定常计算结果表明,NACA0012翼型绕1/4弦点作周期性俯仰振动的升力系数和俯仰力矩系数结果与实验数据吻合良好,验证了数值方法的准确性;在翼型舵面表面有分离区产生,升力系数和俯仰力矩系数形成滞回环,在亚声速情况下,滞回环幅值较小,进入超声速阶段以后,幅值增大,随着翼型间缝隙宽度逐渐增加,翼型升力系数和俯仰力矩系数与无缝翼型相比逐渐降低。     

电离层顶部电子含量对GNSS电离层层析的影响分析

卫星信号射线上的总电子含量(slant total electron content, STEC)是像素基全球卫星导航系统电离层层析(computerized ionospheric tomography, CIT)建模的必要数据来源，但电离层层析通常忽略1 000 km以上的顶部电子含量，为弄清这部分电子含量对层析结果的影响，利用NeQuick2模型计算站星视线上的STEC与其在电离层区域内的STEC比值来改正原始数据，并分别利用改正前后的STEC进行电离层层析。结果显示，电离层顶部电子含量占比约为10%，白天占比略大于黑夜，与测高仪站的数据相比，改正后的均方根值比改正前提高了20%以上；与Swarm卫星提供的电子剖面数据对比，改正后的层析结果精度较改正前提升了19.6%左右，且该方法受地磁扰动影响较为明显。总的来说，利用CIT进行小尺度电离层探测，可较直观地看出，顶部电子含量对层析结果的影响较大，需要采取相应手段予以剔除。     

一种用于液晶曝光中的激光检测系统

介绍了一种非接触式激光检测系统，可用于检测液晶曝光中液晶模板与基板之间的间隙，给出了该种系统的测量原理、硬件系统、信号处理方法、测量结果、分辨力和误差分析，并指出了这种测量系统的应用。     

超大型光学镜面面形的纳米定位技术

电容式传感器在纳米级测试中得到了广泛的应用，但是对环境条件要求较高，检测中温、湿度的变化、传感器本身结构乃至其电路性能等因素，将直接影响测量的准确度和灵敏度。介绍了大型天体望远镜光学镜面面形的控制方法和工作原理。该大型天体望远镜Φ１０ｍ的主镜由３６块对角线长１．８ｍ的六角形子镜拼接而成，应用电容测微技术使此超大型镜面的共面性达到纳米量级的定位控制。通过检测原理的分析，阐述了电容式传感器在使用中提高其准确度和长期稳定性的理论分析和具体技术措施，并针对国内正在研制的ＬＡＭＯＳＴ超大型天体望远镜实际应用环境和技术指标要求，提出新的差动式传感器，并采用新材料和高集成度的进口新器件，以满足传感器在温、湿度变化大的条件下实时监测的要求。     

基于双光纤检测技术的激光点火控制系统设计

基于双光纤检测技术,对激光点火控制系统进行分析,给出了激光器输出功率和检测合格判据的设计方法,分析了影响激光器最低输出功率设计的各相关因素,为激光点火控制系统设计提供了理论依据.     

一种新型测距仪的研制

介绍了一种在中，小范围内，采用激光定位，超声测距的新型测量仪器，该仪器以单片微处理器为核心，对不同的测量距离，采用不同频率的超声波，结合信号处理方法，从而实现０．６～１４ｍ范围内高精度实时测量目标距离，其测量相对误差优于１％。