天地一体化信息网络空间激光通信新技术

空间激光通信是提升天地一体化信息网络传输速率、组网能力、信息安全的重要途径。结合天地一体化信息网络特点,总结国外空间激光通信技术的发展状况,分析有望应用于天地一体化信息网络中的空间激光通信新技术及其优势。希望通过借鉴国外空间激光通信技术发展的经验与启示,促进我国空间激光通信新技术的发展以及天地一体化网络的建设。     

仿生毛细芯平板热管性能研究

为解决电子设备热管理问题,根据亲水性植物叶片表面微观凸起结构,以颗粒直径为75μm的电解铜粉为材料烧结制备了锥形毛细芯,制造了3种平板热管:普通蒸发段（No.1）、超亲水蒸发段（No.2）、超亲水蒸发段与超疏水冷凝段匹配（No.3）。以去离子水为工质,研究了加热功率、角度等因素对3种平板热管热性能的影响。结果表明:角度对3种平板热管的热性能影响不大,3种平板热管均具有较好的抗重力特性。超亲水蒸发段与超疏水冷凝段匹配的平板热管热性能最佳,当倾斜角为0°、加热功率为140.4W时,蒸发段中心点温度仅为67.0℃。超亲水蒸发段与超疏水冷凝段匹配的平板热管不仅具有最小蒸发热阻,最小值可达0.05K/W,而且具有最小冷凝热阻,最小值可达0.02K/W。      

辐射换热对平板气膜冷却性能影响

为了分析辐射换热对平板气膜冷却性能的影响,分别对不考虑辐射换热(耦合计算)与考虑辐射换热两种条件下的平板隔热屏进行了三维流热耦合数值模拟研究,并与绝热壁(不考虑隔热屏固壁导热)的计算结果进行了对比。辐射换热采用离散坐标法。得到了3种不同主/次流总温比(Rt)条件下气膜冷却效果、流场、单位面积冷流体热负荷以及流量系数的对比结果与变化规律。结果表明:气膜冷却效果沿流向逐渐降低,且随总温比的增加而降低;在展向上气膜冷却效果呈现中间高两边低的分布规律,最大与最小相对值在绝热壁条件下达到最大,为94.5%,辐射换热次之,为13.5%,不考虑辐射换热时最小,为9.8%。与不考虑辐射换热结果相比,辐射换热对气膜冷却效果的影响在流动方向逐渐变大,气膜孔附近展向温度梯度增大,冷流体热负荷增加了92.8%,二者计算的流量系数相差不大,为1.1%,与绝热壁计算结果相比,流量系数减小了13.1%。随着总温比增加流量系数减小,最大值与最小值相差不大,为1.1%。     

超高压比民用发动机部件技术水平初步研究

提高总增压比是下一代民用发动机的重要发展趋势之一,有必要对于这一特征的涡扇发动机进行循环参数的研究。利用已有基于Gasturb平台开发的0维变比热部件级性能计算模型,在发动机安装尺寸给定的前提下,总增压比由40提高至60,分析比较不同构型的直驱风扇方案与齿轮传动方案对部件效率,冷却水平对循环参数优选过程的影响。结果表明:为实现更低耗油率,采用更高设计循环增压比,需要部件效率平均提高1%,冷却水平提高20%,此时性能均优于现有的大涵道比涡扇发动机GTF-11。因此,若技术水平未能达到预期目标,则需匹配合适的增压比才能达到更低的耗油率。     

用于冲击/发散双层壁冷却数值模拟的源项法模型

为了避免冷却孔内的网格划分从而减小计算量,将源项法模型应用到冲击加发散双层壁冷却结构的数值模拟中,并分析了网格设置和负能量源离散方式的影响。结果表明：源项法模型能较准确地预测综合冷效的变化趋势;在本文计算范围内,当发散孔入口/出口处面上平均面网格数超过一定量时,数值模拟结果不再随入口/出口处面上网格密度而变化;发散孔热侧壁面附近第一层网格高度对计算结果影响较大,较合适的高度设置是小于或等于0.05倍发散孔直径;固体内负能量源对应源项应均匀地加载在多个体单元上。     

In-orbit assessment of laser retro-reflector efficiency onboard high orbiting satellites

The navigation and geodetic satellites that orbit the Earth at altitudes of approximately 20,000 km are tracked routinely by many of the Satellite Laser Ranging (SLR) stations of the International Laser Ranging Service (ILRS). In order to meet increasing demands on SLR stations for daytime and nighttime observations, any new mission needs to ensure a strong return signal so that the target is easily acquirable. The ILRS has therefore set a minimum effective cross-section of 100 million square metres for the on-board laser retro-reflector arrays (LRAs) and further recommends the use of ‘uncoated’ cubes in the arrays. Given the large number of GNSS satellites that are currently supported by SLR, it is informative to make an assessment of the relative efficiencies of the various LRAs employed. This paper uses the laser ranging observations themselves to deduce and then compare the efficiencies of the LRAs on the COMPASS-M1 navigation satellite, two satellites from the GPS and three from the GLONASS constellations, the two GIOVE test satellites from the upcoming Galileo constellation, the two Etalon geodetic spheres and the geosynchronous communications test satellite, ETS-8. All the LRAs on this set of satellites employ back-coated retro-reflector cubes, except those on the COMPASS-M1 and ETS-8 vehicles which are uncoated. A measure of return signal strength, and thus of LRA-efficiency, is calculated using the laser-range full-rate data archive from 2007 to 2010, scaled to remove the effects of variations in satellite range, atmospheric attenuation and retro-reflector target total surface area. Observations from five SLR stations are used in this study; they are Herstmonceux (UK), Yarragadee (Australia), Monument Peak and McDonald (USA) and Wettzell (Germany). Careful consideration is given to the treatment of the observations from each station in order to take account of local working practices and system upgrades. The results show that the uncoated retro-reflector cubes offer significant improvements in efficiency.     

大型双曲冷却塔表面脉动风压随机特性——风压极值探讨

针对风压信号呈现的非高斯特性和传统极限估计方法的局限,首次提出基于保证率和相关性的极值估计方法——全概率迭代法进行冷却塔表面脉动风荷载极值分析,并和传统的峰值因子法及改进的Sadek-Simiu法计算结果进行对比验证。结果表明：全概率迭代法避开了对随机过程的高斯分布假定,相比传统的极值估计方法其结果更加真实可靠;表达风压极值中脉动分量的峰值因子数值沿着环向和子午向变化显著,如取为同一数值则偏于危险或过于保守;采用全概率迭代法得到的表面风压系数极值分布曲线与规范取值相比,迎风面和负压峰值区域极值偏小,背风区域极值偏大,且最小值对应角度相差约10°。     

Determination of station positions and velocities from laser ranging observations to Ajisai,Starlette and Stella satellites

The positions and velocities of the four Satellite Laser Ranging (SLR) stations: Yarragadee (7090), Greenbelt (7105), Graz (7839) and Herstmonceux (7840) from 5-year (2001–2005) SLR data of low orbiting satellites (LEO): Ajisai, Starlette and Stella were determined. The orbits of these satellites were computed from the data provided by 20 SLR stations. All orbital computations were performed by means of NASA Goddard’s GEODYN-II program. The geocentric coordinates were transformed to the topocentric North–South, East–West and Vertical components in reference to ITRF2005. The influence of the number of normal points per orbital arc and the empirical acceleration coefficients on the quality of station coordinates was studied. To get standard deviation of the coordinates determination lower than 1 cm, the number of the normal points per site had to be greater than 50. The computed positions and velocities were compared to those derived from LAGEOS-1/LAGEOS-2 data. Three parameters were used for this comparison: station coordinates stability, differences from ITRF2005 positions and velocities. The stability of coordinates of LEO satellites is significantly worse (17.8 mm) than those of LAGEOS (7.6 mm), the better results are for Ajisai (15.4 mm) than for Starlette/Stella (20.4 mm). The difference in positions between the computed values and ITRF2005 were little bit worse for Starlette/Stella (6.6 mm) than for LAGEOS (4.6 mm), the results for Ajisai were five times worse (29.7 mm) probably due to center of mass correction of this satellite. The station velocities with some exceptions were on the same level (≈1 mm/year) for all satellites. The results presented in this work show that results from Starlette/Stella are better than those from Ajisai for station coordinates determination. We can applied the data from LEO satellites, especially Starlette and Stella for determination of the SLR station coordinates but with two times lower accuracy than when using LAGEOS data.     

基于RS-485的飞机液冷附件维修检测台监控系统

飞机液冷附件维修检测台可模拟飞机液冷回路运行状态，同时监控流量、压力及温度，集实验、检测、维修为一体。本文介绍了一款基于RS-485通信网络搭建的飞机液冷附件维修检测台监控系统的主要构成及运行状况。     

线性调频半导体激光衍射光栅干涉仪

介绍一种以线性调频半导体激光为光源的衍射光栅干涉仪。激光与光栅上衍射的±１级衍射波会合，由于有光程差而发生光拍频，测量拍频信号的相位移则可测得光栅的位移。设计了一种克服激光波长漂移和空气折射率变化影响的对称差动光路，使这种方法达到实用化的程度，分辨力达到纳米级。此外，还介绍了应用于接触干涉仪的实验情况。