进、排气壳对全流道大膨胀比涡轮性能影响研究

进、排气系统对涡轮级的性能影响鲜有研究,本文针对增压器涡轮,采用数值方法对全流道大膨胀比跨声速涡轮与进、排气壳进行耦合计算,探索进、排气壳耦合对涡轮级的性能参数影响,结果显示进气壳主要影响静叶10%叶高与50%叶高前缘来流气流角周向分布,静叶排会减弱进气壳带来的参数周向不均匀性,排气壳主要影响动叶尾缘0°与180°周向位置总压与静压分布,进、排气壳耦合涡轮级总静效率比均匀边界涡轮级下降0.25%。     

一种瞬时大带宽DRFM系统的信道化设计

为实现宽带雷达回波信号的模拟生成,通常采用基于信道化技术的射频存储(DRFM)系统。在信道化DRFM系统中,不合理的信道划分方案和多相滤波器设计会导致频谱混叠、频谱分量缺失和幅度失真。文章提出了一种相邻信道频谱有50%交叠的信道划分方法,并对信道化滤波器组进行了优化设计。在此基础上,给出了一种瞬时大带宽DRFM系统的实现方案。仿真结果表明,文章提出的设计方案可以实现Nyquist采样带宽内雷达信号的射频存储和模拟转发,且具有较小的幅度失真,可以满足瞬时大带宽雷达回波信号的模拟需求。     

Large eddy simulations of a turbulent mixing layer periodically excited with fundamental and third harmonic frequency

A better understanding of the mixing behavior of excited turbulent mixing layers is critical to a number of aerospace applications. Previous studies of excited turbulent mixing layers focused on single frequency excitation or the excitation with fundamental and its second harmonic frequency. There is a lack of detailed studies on applying low and higher frequency excitation. In this study, we have performed large-eddy simulations of periodically excited turbulent mixing layers. The excitation consists of a fundamental frequency and its third harmonic. We have used phase-averaging to identify the vortex structure and strength in the mixing layer, and we have studied the vortex dynamics. Two different vortex paring mechanisms are observed depending on the phase shift between the two excitation frequencies. The influence of these two mechanisms on the mixing of a passive scalar is also studied. It is found that exciting the mixing layer with these low and high frequencies has initially an adverse influence on the mixing process; however, it improves the mixing further downstream of the splitter plate with the excitation using a phase shift of $\mathrm{\Delta }\varphi =\mathrm{\pi }$ showing the best mixing performance. The present works shed lights on the fundamental vortex dynamics, and has great potential for aeronautical, automotive and combustion engineering applications.     

Real-time ray-based channel generation and emulation for UAV communications

A real-time ray-based hardware emulator for Unmanned Aerial Vehicle (UAV) communication channels which suits for the Three-Dimensional (3D) dynamic scenarios and considers the movements of both terminals is developed in this paper. The time-variant channel parameters, i.e., ray delay, ray gain, and ray Doppler frequency are precalculated in the host by using the Ray Tracing (RT) method. Meanwhile, RT simulation dramatically increases the number of valid rays. To address the problem of resource limitation and huge computational burden in the implementation, an efficient ray coefficients generation method based on iteration is proposed and implemented. With the advantages of low cost and high flexibility, a Software Defined Radio (SDR) hardware platform is used to emulate the ray-based UAV channels by utilizing the compact architecture including the Time-Division (TD) scheme and Tapped-Delay Line (TDL) for channel convolution. Finally, hardware measurement results demonstrate that the properties of emulated channel, i.e., Power Delay Profile (PDP) and Doppler Power Spectrum Density (DPSD) consist with the simulated ones, which verifies the correctness of hardware implementation. The proposed channel emulator provides an efficient way for optimization, verification, and evaluation of UAV communication systems.     

合成孔径雷达射频干扰抑制技术进展及展望

射频干扰(RFI)是影响合成孔径雷达精确遥感的一个难点问题,严重阻碍了原始回波的采集、成像和后续解译过程。本文对适用于合成孔径雷达系统的RFI抑制技术进行了综述研究。首先分析了典型的星载和地面RFI源以及其对合成孔径雷达系统的影响,给出了典型RFI类型的信号模型和实测数据示例;然后系统地介绍了抑制RFI的先进信号处理技术,并从适用性的角度讨论了每种方法的优缺点;最后从认知、综合和自适应的角度探讨了未来干扰抑制技术的发展趋势与展望。     

车载大型遥测天线新型方舱开盖机构的设计

随着航天遥测任务对机动性和防护性要求越来越高，车载大型遥测天线开始尝试安装在方舱内，运输时可以收藏防护，工作时可以展开，并要求在车辆运动过程中进行工作，实现通信要求。方舱开盖机构是作为消除风沙雨雪等环境负载影响、改善工作条件、提高车载大型遥测天线可靠性的一项重要举措。开盖机构能够自动开启和闭合，满足大型遥测天线工作需求，收藏状态能够对大型遥测天线起到防雨、防尘和防撞击等防护作用。由于大型遥测天线尺寸跨距大，又受铁路、公路运输的限制，导致常用的开盖机构设计空间受限制，并大幅增加了方舱开盖机构防护难度。针对上述问题，介绍了一套车载大型遥测天线新型方舱开盖机构的设计，将舱顶的顶板从左右方向分为两块，左右翻转打开。为了完全不影响天线的工作，方舱左右壁上部的立板也随着顶板一起翻转，顶板和立板翻转后，均与左右舱壁贴合，保证开盖机构打开后，整车宽度尺寸不影响车辆的公路运输性。该开盖机构采取电动推杆和钢丝绳绞盘方式进行自动开盖和闭合，并对机构进行力学分析计算、电动推杆和钢丝绳绞盘选型确认。新型方舱开盖机构既实现了方舱顶盖的自动开启和闭合，又满足了大型遥测天线的车辆运输和运动过程中的通信要求，有效实现防护功能，实际应用效果良好。     

大型低温液体火箭“零窗口”发射技术

我国大型低温液体运载火箭组成系统多、各系统耦合关联程度大、射前流程复杂，实现“零窗口”发射难度大。基于大型低温液体运载火箭的系统特点和射前约束条件，提出了实现“零窗口”发射的技术方案。通过能力挖潜主动拓展了任务故障适应性和窗口宽度，并辅以科学的测试发射策略，将技术和流程相结合，共同实现大型低温运载火箭“零窗口”发射目标。这对全面提升大型运载火箭和发射场“零窗口”发射能力、适应未来航天发展需求具有十分重要的意义。     

双通道光纤陀螺捷联惯导的设计与实现

针对光纤陀螺惯导精度和动态性能相互矛盾的问题,从实际应用需求出发,提出了一种高精度和大量程的双通道光纤陀螺捷联惯导系统.介绍了设计的基本原理和系统组成,并详细阐述了大小光纤陀螺设计、双通道加速度计设计和软件算法设计等关键技术,最后研制了一套原理样机.通过系统级标定试验、量程和陀螺精度试验、高动态振动环境试验和动态跑车试验等对样机进行验证,结果表明该技术方案具有可行性,为其他光纤陀螺惯导系统提供了新的设计思路.     

空间低频射电天文天线材质-观测性能分析

15MHz以下的射电天文信号由于受到电离层的阻挡只能通过空间卫星平台进行观测。采用空间展开的电小天线是目前普遍的做法。就电小天线的材质-接收性能方面进行分析，构建了基于材质磁导率、电导率对后端接收机噪声影响模型。通过计算结果比对和就天线材质空间展开难易程度的综合考虑，归纳总结了不同材质对空间低频射电天文观测噪声影响以及展开难度，为新天线的研制提供了数据依据。该项工作将为下一步L1点空间天气监测卫星中的太阳射电观测载荷提供技术支持。