重力仪散热装置的热仿真分析

随着移动平台重力测量精度的不断提高,对重力仪的温度控制提出了更高的要求。为了实现在不同温度环境下的高精度重力测量,本文设计了一种保温散热装置,为重力仪提供第一级温控。利用Fluent软件分别模拟了0℃,22℃和40℃环境温度下此装置内重力仪系统的温度场,并在此基础上,利用高低温箱完成该装置的温度性能实验,验证了此温控方案的可行性。     

一种非接触光外差轮廓仪

介绍了一种纳米级非接触超高精度光外差轮廓仪。该量仪是基于普通光路的外差干涉仪,两束具有微小频差的激光束照射到制件表面:其中一束光被会聚后作为测量光针扫瞄制件表面;另一束光则被用作参考光束。这两束光经反射后形成干涉,所得信号的光程差与制件表面高度变化成正比。量仪的横向分辩力小于2μm,垂直分辩力小于1nm。制件不需要进行大的调整。制件表面同时亦被作为测量参考面。经光电转换后,信号由微机处理,从而快速完成测量、计算、显示与打印各种参数与图形。     

Multi-channel discharge characteristics cutting by ultra-fine wire-EDM

Compared with a copper wire electrode, molybdenum wire with a poor conductor is usually used as the electrode in high speed wire-cut electrical discharge machining(HSWEDM), so the resistance of an ultra-fine wire cannot be ignored. To study the differences of discharge characteristics between the ultra-fine wire and the conventional diameter wire, the continuous discharge waveform of two kinds of wire electrodes was compared. It was found that there was a multichannel discharge phenomenon in the...     

Validation of non-linear split window algorithm for land surface temperature estimation using Sentinel-3 satellite imagery: Case study; Tehran Province,Iran

In recent years, land surface temperature (LST) has become critical in environmental studies and earth science. Remote sensing technology enables spatiotemporal monitoring of this parameter on large scales. This parameter can be estimated by satellite images with at least one thermal band. Sentinel-3 SLSTR data provide LST products with a spatial resolution of 1 km. In this research, direct and indirect validation procedures were employed to evaluate the Sentinel-3 SLSTR LST products over the study area in different seasons from 2018 to 2019. The validation method was based on the absolute (direct) evaluation of this product with field data and comparison (indirect) evaluation with the MODIS LST product and the estimated LST using the non-linear split-window (NSW) algorithm. Also, two emissivity estimation methods, (1) NDVI thresholding method (NDVI-THM) and (2) classification-based emissivity method (CBEM), were used to estimate the LST using the NSW method according to the two thermal bands of Sentinel-3 images. Then, the accuracy of these methods in estimating LST was evaluated using field data and temporal changes of vegetation, which the NDVI-THM method generated better results. For indirect evaluation between the Sentinel-3 LST product, MODIS LST product, and LST estimated using NSW, four filters based on spatial and temporal separates between pairs of pixels and pixel quality were used to ensure the accuracy and consistency of the compared pairs of a pixel. In general, the accuracy results of the LST products of MODIS and Sentinel-3, and LST estimated using NSW showed a similar trend for LST changes during the seasons. With respect to the two absolute and comparative validations for the Sentinel-3 LST products, summer with the highest values of bias (?1.24 K), standard deviation (StDv = 2.66 K), and RMSE (2.43 K), and winter with the lowest ones (bias of 0.14 K, StDv of 1.13 K, and RMSE of 1.12 K) provided the worst and best results for the seasons in the period of 2018–2019, respectively. According to both absolute and comparative evaluation results, the Sentinel-3 SLSTR LST products provided reliable results for all seasons on a large temporal and spatial scale over our studied area.     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

A novel framework for liquid propellant engine’s cooling system design by sensitivity analysis based on RSM and multi-objective optimization using PSO

One of the challenges of combustion chamber and nozzle design in a Liquid Propellant Engine (LPE) is to predict the behavior and performance of the cooling system. Therefore, while designing, the optimization of the cooling system is always of great importance. This paper presents the multi-objective optimization of the LPE’s cooling system. To this end, a novel framework has been developed, resulting from the application of the Response Surface Method (RSM) and the correlation coefficients matrix, sensitivity analysis and the The Particle Swarm Optimization (PSO). based on this method, the input variables, constraints, objective functions, and their surfaces were identified. In terms of multi-optimization algorithms, RSM and PSO are utilized to get global optimum. In conclusion, the methodology capability is to optimize the LPE’s cooling system, 6 percentage increase in total heat transfer and 7 bar decrease cooling system pressure loss, which resulted in a 1.2-seconds increase in the specific impulse of the engine.     

超燃冲压发动机燃烧室出口温度场分布CARS测量

针对超燃冲压发动机研究中对燃烧室出口温度场的测量需求以及暂冲式超燃冲压发动机燃烧台架试验中的应用难点,开发了适用于瞬态燃烧场温度测量的单脉冲相干反斯托克斯拉曼反射（CARS）系统及CARS光谱计算和温度反演软件CARSCF。采用USED相位匹配方式来降低湍流影响,结合多尺度小波分析方法来实现CARS光谱降噪处理,提高信噪比。在暂冲式脉冲燃烧风洞上开展了来流马赫数2.6条件下超燃冲压发动机燃烧室出口温度测量试验,获取了超声速来流（冷态）建立、H₂点火加热空气、建立超声速燃烧流场直至试验结束过程中的燃烧室出口温度,以及煤油/空气燃烧时燃烧室出口温度场分布。结果显示,超声速冷流时温度处于低温（约205K）状态,随着H₂点火加热来流空气,来流温度上升至853K;随着煤油/Air点火,温度急剧上升,稳定燃烧状态下燃烧流场温度为1970K±144K。燃烧室出口截面温度场分布测量结果显示,高温区位于燃烧室出口截面上侧区域,而燃烧室出口截面上中间区域的温度低于上下两侧。燃烧室出口温度分布CARS测量结果与火焰自发光成像结果一致,表明单脉冲CARS技术用于瞬态燃烧流场温度测量的可行性。     

硅烷偶联剂在防热涂料中的应用前景分析北大核心CSCD

硅烷偶联剂作为一种重要的处理剂,广泛应用于涂料、橡胶、塑料等领域。本文综述了硅烷偶联剂的结构特点和作用机理,介绍了硅烷偶联剂在常用涂料领域的几种典型应用,主要包括基体树脂增容、颜填料表面改性、涂层与基材连接,讨论了不同使用条件下影响硅烷偶联剂效果的因素,并对硅烷偶联剂在防热涂料中应用的发展趋势进行了展望。     

钛合金TC4的超硬磨料柔性抛光轮数控抛光试验研究

航空发动机叶片钛合金材料在数控磨抛加工中容易发生烧伤及黏附现象,针对常用的TC4材料开展了超硬磨料柔性抛光轮数控抛光试验研究。分析了超硬磨料柔性抛光轮抛光参数中转速、进给速度、预压量及行距对抛光去除深度及抛光后试件表面粗糙度的影响规律并通过正交试验分析了各抛光参数影响的主次关系。确认了钛合金试件抛光表面黏附物质成分,并同时分析了表面黏附物的形成原理。给出了TC4钛合金材料在超硬磨料柔性抛光轮数控抛光过程中工艺参数的选择策略,为TC4材料的航空发动机叶片和整体叶盘在超硬磨料柔性抛光轮数控抛光过程中提供理论依据和技术基础。     

表面温度传感器自动检定系统

介绍了一种用于表面温度传感器检定的数据采集、处理系统,此系统具有操作简单,使用方便,运行可靠等特点。