基于拉格朗日插值法的ATS射频信号衰减修正研究

对自动测试系统中射频信号通路的衰减修正进行了研究。为解决现有修正方法操作复杂、后期维护困难的问题,提出了基于拉格朗日插值的方法来实现射频信号衰减的修正,在保证修正数据准确度的前提下既减少了修正的工作量又降低了系统后期维护的难度,并通过算例和验证了该方法的可行性。     

基于对称Holder系数的雷达辐射源信号特征分析

文章基于Holder系数,提出了一种改进的雷达辐射源信号脉内特征提取方法,称之为对称Holder系数法。给出了对称Holder系数的定义,描述了基于对称Holder系数的特征提取算法。可以看出对称Holder系数法包含了相像系数法,后者只是前者的一种特例,且该方法相对于Holder系数法,其复杂度将减少一半。文中选择了6种典型的雷达辐射源信号进行特征提取和分类识别实验。实验结果表明,对称Holder系数在取不同类型时均获得了很好的正确识别率,并且当对称Holder系数所选取的类型不为相像系数时,可以获得更高正确识别率。     

带约束多体系统Lyapunov指数的数值计算方法

应用第1类Lagrange方程建立的带约束多体系统动力学方程为非线性微分-代数方程组.利用增广法,将其转化成了常微分方程组,并表示成矩阵形式.根据方程的特点,给出了方程的Jacobi矩阵的具体表达式,提高了计算效率.在此基础上,给出了Lyapunov指数的数值计算方法,并通过对具体的树形和非树形多体系统进行Lyapunov指数数值计算,结合相图和Poincare映射对系统的动力学特性进行了分析,表明了该方法的可行性和有效性.      

计算故障先验概率的最大熵方法

为了解决故障先验概率估算不准的问题,提出了基于最大熵的故障先验概率的计算模型.该模型以相关的先验信息作为最大概率估计的约束条件,并通过拉格朗日函数,将故障先验概率估算问题转化成无约束优化问题.为了实现对无约束优化问题的快速求解,提出了一种基于最速下降法和牛顿法的混合梯度算法;并且,针对大规模系统中故障变量过多的情况,依据系统分解的原则,将高维故障空间分解为多个低维故障空间,给出了低维故障空间求解的快速计算方法.通过最大熵方法和故障平均间隔(MTTF,Mean Time To Failure)方法的结果比较,证明最大熵方法更具准确性.      

高超声速再入飞行器气动特性的快速预示—局部方法的推广应用

本文将计算高超声速稀薄气流过渡领域中气动特性的局部方法,推广应用到连续介质中弹头型高超声速再入飞行器气动力特性的快速估算。由激波风洞中M_∞=9.9时,一个8°钝锥的气动力测量结果,导出这一实验条件下的领域系数,并以此来估算不同锥角、不同钝度比及不同外形弹头型再入飞行器的气动力和力矩系数,其结果与无粘数值解及实验结果作了比较,在攻角2°～14°范围内吻合得很好。局部方法可用于弹头型高超声速再入飞行器气动特性的快速预示。     

Feasibility study of autonomous orbit determination using only the crosslink range measurement for a combined navigation constellation

In order to expand the coverage area of satellite navigation systems, a combined navigation constellation which is formed by a global navigation constellation and a Lagrangian navigation constellation was studied. Only the crosslink range measurement was used to achieve long-term precise autonomous orbit determination for the combined navigation constellation, and the measurement model was derived. Simulations of 180 days based on the international global navigation satellite system(GNSS) service(IGS) ephemeris showed that the mentioned autonomous orbit determination method worked well in the Earth–Moon system. Statistical results were used to analyze the accuracy of autonomous orbit determination under the influences of different Lagrangian satellite constellations.     

Slip boundary conditions for rough surfaces

The velocity slip and temperature jump for a two-dimensional rough plate under hypersonic conditions were analyzed using the Direct Simulation Monte Carlo (DSMC) method. Surface roughness was explicitly modeled by introducing various structures on the flat plate. The influences of relative roughness height, which involves the roughness height, roughness spacing, incoming velocity, and the degree of rarefaction, were analyzed and discussed. It is found that with the increase of the relative roughness height, the jump temperature increases, while the slip velocity decreases gradually. The effects of surface roughness on the slip coefficients can be attributed to the change of accommodation coefficients. A new slip model for rough surfaces was established in this paper, which accounts for the coupling effects of gas rarefaction and surface roughness, without the effort to model the surface roughness explicitly. The nitrogen flows in the microchannel, and flows over a blunt cone and an axisymmetric bi-conic body, were simulated under the modified and conventional slip boundary conditions, respectively. The numerical solutions were validated with experimental data. It can be safely concluded that compared with the traditional first-order slip boundary conditions, the modified slip model improves the accuracy of macroscopic properties, especially the heat transfer coefficient.     

Collaborative force and shape control for large composite fuselage panels assembly

This study proposed a force and shape collaborative control method that combined method of influence coefficients(MIC) and the elitist nondominated sorting genetic algorithm(NSGA-II) to reduce the shape deviation caused by manufacturing errors, gravity deformation,and fixturing errors and improve the shape accuracy of the assembled large composite fuselage panel. This study used a multi-point flexible assembly system driven by hexapod parallel robots. The proposed method simultaneously considers...