基于Kalman滤波的变体飞行器T-S模糊控制

针对变体飞行器的跟踪控制问题,提出了一种基于Kalman滤波的T-S模糊控制方法。考虑飞行器系统状态不可测,引入惯导数据作为辅助信息,利用Kalman滤波算法融合飞控信息与惯导信息实现状态估计。由于变体飞行器在不同变形结构下气动特性变化较大,为便于控制器设计,采用小扰动线性化方法得到飞行器在不同平衡点处的局部线性模型,并通过状态反馈方法设计局部控制器,局部线性模型和局部控制器通过模糊集和模糊规则聚合成一个连续光滑的全局T-S模糊模型和T-S模糊控制器。通过综合Kalman滤波器与T-S模糊控制器得到一个基于Kalman滤波的T-S模糊控制器。仿真结果表明,该控制器在变形过程中能够实现状态估计,保证飞机的跟踪性能。     

大航向角误差情况下飞行中对准研究

为了解决飞行器在大航向角误差的情况下进行飞行中对准的难题,将一种线性大航向角误差模型应用于飞行器飞行中对准的过程.详细推导了线性大航向角误差模型,设计了飞行器在大航向角误差情况下进行飞行中对准的卡尔曼滤波模型,并进行了数字仿真.仿真结果表明,线性大航向角误差模型应用于飞行器飞行中对准,能够很好地解决飞行器在大航向角误差情况下进行对准的难点,并给出了适合于大航向角误差模型的机动方式.最后,提出了线性大航向角误差模型在工程应用中的几点建议     

Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

UDu~T分解滤波算法及其应用

本文介绍UDU~T 分解滤波算法;用工程师容易理解的方法重新推导时间修正和量测修正滤波公式,并给出标准通用的UDU~T 分解滤波子程序。本算法子程序已实际用于工程估计器中。本算法具有高的数字稳定性。作为UDU~T 分解滤波算法理论和工程应用之间桥梁的本通用标准子程序具有良好性能,使用方便,极易推广应用。     

Investigations into sensing characteristics of circular thin-plate electrostatic sensors for gas path monitoring

Circular thin-plate electrostatic sensors are promising in gas path monitoring due to their advantages of non-intrusiveness and easy installation. The spatial sensitivity and filtering effect are two important performance parameters. In this paper, an analytically mathematical model of induced charge on a circular thin-plate electrode is first derived. Then the spatial sensitivity and filtering effect of the circular electrostatic sensor are investigated by numerical calculations. Finally,experimental studies are performed to testify the theoretical results. Both theoretical and experimental results demonstrate that circular thin-plate electrostatic sensors act as a low-pass filter in the spatial frequency domain, and both the spatial filtering effect and the temporal frequency response characteristics depend strongly on the spatial position and velocity of the charged particle. These conclusions can provide guidelines for the optimal design of circular thin-plate electrostatic sensors.     

基于自适应粒子滤波的涡扇发动机故障诊断

针对涡扇发动机非线性、非高斯的特点,提出了一种自适应的粒子滤波算法用于涡扇发动机气路部件突变故障的诊断.为了减小算法的计算量并且保证滤波精度,分析了滤波精度和样本数目的关系,提出根据滤波过程中状态的方差自适应地调整粒子数,在保证一定的滤波精度下可以有效地减少滤波过程中使用的粒子数,提高了算法的实时性.同时,引入扩展卡尔曼滤波(EKF)用于更新粒子,产生重要概率密度函数,在一定程度上避免了粒子的退化.通过某型涡扇发动机的仿真分析表明:改进的算法相比标准粒子滤波算法用于涡扇发动机气路部件故障诊断时,参数估计的方均根误差减小了50%左右,且算法的计算量减小了30%.     

单天基平台测向的空间非合作目标跟踪

针对仅含角度测量信息的单个天基平台可观测性较弱的问题,提出了一种含脉冲机动检测的空间非合作目标跟踪算法,并设计了非合作目标实时跟踪数据处理流程.该算法利用抗差估计技术和UKF（Unscented Kalman Filter,无迹卡尔曼滤波）算法构造目标跟踪滤波器,并综合残差多项式拟合和新息分布特征等方法实现目标机动检测,在天基平台观测信息类型有限和观测几何较差的情况下,可以同时排除孤立野值和成片测量野值的影响,实现非合作机动目标的连续稳定跟踪.数值实验验证了算法的可行性和有效性,也表明了跟踪精度和可靠性与测量精度密切相关.     

一种基于机动辨识预测的空空导弹导引律

现有的空空导弹导引头在有噪声和干扰的环境下获得目标精确信息存在时间延迟,且新一代目标的机动能力更强,不对导弹加以补偿会造成较大脱靶量,所以需对目标状态有效预测。针对新一代目标规避空空导弹常用的大机动模式,为满足新一代空空导弹发展需求,设计了一种新型复合导引律。从目标自身出发,研究高机动目标规避导弹采用的典型机动形式,对机动轨迹进行离线建模,构建具有扩展能力的目标机动模型库。设计自适应滤波器对测量噪声进行降噪。同时,利用模型库设计了机动辨识预测器,对目标实际机动进行在线辨识。基于在线辨识的结果对目标机动进行预测,并对时间延迟进行补偿和修正,实现对高机动目标的精确打击。仿真结果表明:该方法对不同类型的机动目标均有较高的预测精度和命中精度。     

Lateral Flight Technical Error Estimation Model for Performance Based Navigation

Flight technical error (FTE) combined with navigation system error (NSE) is the main part of total system error (TSE) in performance based navigation (PBN).The implementation of PBN requires pre-flight prediction and en-route short-term dynamical prediction of the TSE.Once the sum of predicted lateral FTE and NSE is greater than the specified PBN value,the PBN cannot operate.Thus,accurate modeling and thorough analysis of lateral FTE are indispensible.Multiple-input multiple-output (MIMO) lateral track control system of a transport aircraft is designed using linear quadratic Gaussian and loop transfer recovery (LQG/LTR) method,and the lateral FTE of a turbulence disturbed approach operation is analyzed.The error estimation mapping function of latera FTE and its bound estimation algorithm are proposed based on singular value theory.According to the forming mechanism of lateral FTE,the algorithm considers environmental turbulence fluctuation disturbance,aircraft dynamics and control system parameters.Real-data-based Monte-Carlo simulation validates the theoretical analysis of FTE.It also shows that FTE is mainly caused by turbulence fluctuation disturbance when automatic flight control system (AFCS) is engaged and would increase with escalating environmental turbulence intensity.