一种MEMS陀螺仪零偏建模与估计方法

针对MEMS陀螺仪零偏随时间变化的问题,提出了一种MEMS陀螺仪的零偏建模与估计方法.通过分析静态条件下陀螺仪零偏变化的影响因素,建立了陀螺仪零偏和温度之间的差分方程模型.采用系统辨识的方法,给出了系统模型的参数辨识流程.基于最小二乘法,实现了模型参数的辨识.设计了测试验证试验,基于陀螺仪的零偏样本特性建立了三阶差分方...     

基于数字孪生的航天电推进器优化设计方法

针对以引力波探测为代表的空间科学任务和以“国网星座计划”为代表的商用卫星网络任务对推进器的特殊需求，本文提出了一种基于数字孪生的推进器优化设计方法。该方法首先建立由机理模型模块和测试数据集模块组成的数字孪生体。机理模型模块依据推进器的物理过程建立模型，对难以测量的数据进行仿真模拟；测试数据集模块通过实验对推进器进行测试，依靠测试数据建立可测参数的数学模型。将数字孪生体与实验进行对比，通过对比结果反馈调节机理模块从而不断提高孪生体的准确性，最终为优化设计提供依据。结果表明：(1)该方法能够构建微波离子推进器的数字孪生体；(2)该数字孪生体的预测结果存在一定差异，通过分析发现该差异与机理模型的精细度以及测试数据集的数据量有关。     

石英谐振加速度计振梁内部热应力的抑制方法研究

石英谐振加速度计具有抗干扰能力强、准数字输出和易于集成等优点，但温漂成为了制约其稳定性指标的关键因素。本文通过全石英无异质材料设计和热应力隔离结构方案有效抑制加速度计振梁内部产生的热应力。传感器敏感结构由惯性质量块、铰链、固定基底和微谐振器组成，均采用石英晶体材料制备，且两个微谐振器呈差动布置可以通过差分对振梁内热应力进行部分抑制。通过微谐振器的四边形框架设计可以将工作环境中产生的热应力与振梁隔离，再对固定基底上的热应力敏感部分进行拓扑优化设计来抑制工作时从固定锚点处传递至振梁内部的热应力。本文对石英谐振加速度计进行了全温度下的有限元仿真计算分析，工作环境温度从室温到75 ℃，微谐振器振梁内部产生的热应力经优化后减少了99.41%以上。     

Plasma transport simulation under different conditions and optimization analysis of dual-stage grid ion thruster

In order to study the extraction and acceleration mechanism of the dual-stage grid, a three-dimensional model based on the Particle-In-Cell/Monte Carlo Collision(PIC/MCC) method is performed. Dual-stage grid ion thruster is a new type of electrostatic ion thruster, which can break through the limitations of traditional gridded ion thrusters, and greatly improve the specific impulse. The high performance also makes the grid sensitive to operating parameters. In this paper,the influence of grid pa...     

On a plastic instability criterion for ultra-large radial-axial ring rolling process with four guide rolls

A dynamic mechanical model is proposed to describe the complexing actions of all the rolls on the ring during the ultra-large radial-axial ring rolling(RARR) process with four guide rolls. Based on the model, the calculation models for bending moment and normal stress at any section of the ring are deduced by force method. If the maximum section bending normal stress exceeds the yield stress of the ring materials, the ring will be distorted thus leading to the instability of the RARR process. Ac...     

Numerical simulations of a continuously injected relativistic electron beam relaxation into a plasma with large-scale density gradients

In this paper the influence of large-scale decreasing and increasing gradients of the density of magnetized plasma on the relaxation process of a continuously injected relativistic electron beam with an energy of 660 keV ($v_b=0.9c$) and a pitch-angle distribution is studied using particle-in-cell numerical simulations. It is found that for the selected parameters in the case of a smoothly decreasing gradient and in a homogeneous plasma the formation of spatially limited plasma oscillations of large amplitude occurs. In such cases, modulation instability develops and a long-wave longitudinal modulation of the ion density is formed. In addition, the large amplitude of plasma waves accelerates plasma electrons to energies on the order of the beam energy. In the case of increasing and sharply decreasing gradients, a significant decrease in the amplitude of plasma oscillations and the formation of a turbulent ion density spectrum are observed. The possibility of acceleration of beam electrons to energies more than 2 times higher than the initial energy of the beam particles is also demonstrated. This process takes place not only during beam propagation in growing plasma density, but also in homogeneous plasma due to interaction of beam particles with plasma oscillations of large amplitude.     

A new approach for pulse amplitude measurement using Lagrange’s interpolation for radiation or particle detectors

In radiation detector signal processing, usually, the charge-sensitive preamplifier converts the small charge signal coming from the semiconductor-based detector into voltage form and then the signal is further amplified to measure the energy of the incoming radiation. The voltage pulse from a charge-sensitive preamplifier (CSPA) is amplified using a shaping amplifier which reduces the signal bandwidth. To achieve better energy resolution, precise measurement of the peak amplitude of shaping amplifier output is required. The signal processing methods are available in which the signal from the charge-sensitive preamplifier can be directly digitized using high-speed Analog to Digital Converters (ADC), and then further signal processing such as gain and shaping is carried out inside the Field Programmable Gate Arrays (FPGA). For multiple detector systems, digital signal processing methods are quite difficult to implement in Field Programmable Gate Arrays (FPGA). In this context, The development of an alternative technique is initiated that uses a charge-sensitive preamplifier, shaping amplifier, low sampling analog-to-digital converter, and FPGA, where LaGrange’s interpolation technique is implemented in FPGA to precisely measure the peak of the analog pulse. In this paper, the comparison of the proposed method with other pulse amplitude measurement techniques is discussed. Results show that the implemented technique gives similar energy resolution compared to digital pulse processing and standard peak detector-based techniques.     

内并联型进气道模态转换过程中流道间干扰特性研究

针对组合动力进气道模态转换过程中存在的流道间干扰现象,采用数值模拟方法对一典型内并联型进气道模态转换过程中高/低速流道间的干扰特性展开了深入研究。结果表明：在模态转换过程中,当低速流道结尾激波位于低速流道内部时,高速流道节流至一定程度都将对低速流道形成干扰。该干扰现象出现后,高/低速流道的流动耦合,两流道的流量分配也随之发生变化,甚至导致了进气道流场的失稳。仅当β/α=0.25时,高/低速流道间的干扰造成了进气道流场的失稳且失稳后的振荡流场会先后出现两个不同的发展时期：前一时期的振荡流场的振幅较大但频率较低,约为335Hz；后一时期的振荡流场的振幅较小但频率较高,约为880Hz。