多尺度子域基函数矩量法解的稳定性与迭代法

通过对几个具体实例的计算，证实了在电磁场边值问题的矩量法求解过程中，选用不同的基函数其解的数值稳定性会有很大的差别。从而有可能选择一种数值稳定性比较好的基函数来进行矩量法求解。另一方面，提出了选用多尺度子域基函数，并通过多次迭代来提高矩量法解的精度的算法。实例计算表明，该算法不仅可以有效地降低系数矩阵的条件数，而且还降低了对计算机内存容量的要求，是一种有效的、稳定的算法     

我国融资租赁存在的问题与对策

融资租赁是以"融物"的形式来实现"融资"的目的.融资租赁业在我国发展过程中仍存在着不少的问题和困难,要发展好国内的融资租赁业,需从政策、立法、信用、人才培养和租赁形式等多方面人手提出对策,推进我国融资租赁业的健康发展.     

Inverse identification of constitutive parameters of Ti2AlNb intermetallic alloys based on cooperative particle swarm optimization

Ti₂AlNb intermetallic alloy is a relatively newly developed high-temperature-resistant structural material, which is expected to replace nickel-based super alloys for thermally and mechanically stressed components in aeronautic and automotive engines due to its excellent mechanical properties and high strength retention at elevated temperature. The aim of this work is to present a fast and reliable methodology of inverse identification of constitutive model parameters directly from cutting experiments. FE-machining simulations implemented with a modified Johnson-Cook (TANH) constitutive model are performed to establish the robust link between observables and constitutive parameters. A series of orthogonal cutting experiments with varied cutting parameters is carried out to allow an exact comparison to the 2D FE-simulations. A cooperative particle swarm optimization algorithm is developed and implemented into the Matlab programs to identify the enormous constitutive parameters. Results show that the simulation observables (i.e., cutting forces, chip morphologies, cutting temperature) implemented with the identified optimal material constants have high consistency with those obtained from experiments, which illustrates that the FE-machining models using the identified parameters obtained from the proposed methodology could be predicted in a close agreement to the experiments. Considering the wide range of the applied unknown parameters number, the proposed inverse methodology of identifying constitutive equations shows excellent prospect, and it can be used for other newly developed metal materials.     

Association of optical tracklets from a geosynchronous belt survey via the direct Bayesian admissible region approach

The direct Bayesian admissible region approach is an a priori state free measurement association and initial orbit determination technique for optical tracks. In this paper, we test a hybrid approach that appends a least squares estimator to the direct Bayesian method on measurements taken at the Zimmerwald Observatory of the Astronomical Institute at the University of Bern. Over half of the association pairs agreed with conventional geometric track correlation and least squares techniques. The remaining pairs cast light on the fundamental limits of conducting tracklet association based solely on dynamical and geometrical information.     

Double-decoupled inverse design of natural laminar flow nacelle under transonic conditions

The inverse design based on the pressure distribution is an essential approach to realize the improvement of Natural Laminar Flow(NLF) performance for nacelles. However, the direct definition of target pressure distribution at design point is challenging for the dilemma to consider the constraints of shock wave and laminar flow at the same time. In addition, the universality of method will be limited when the inverse design is strongly coupled with the solver. Thus, a double-decoupled methodolog...     

关于计算机2000年问题的探讨

计算机２０００年问题已引起人们的普遍关注,必须在进入２０００年前予以妥善解决。对其可采用修改应用程序、更换系统软件、更换硬件设备等多种办法进行处理。在应用程序的修改中采用变形的日期移位法是对大多数办公系统容易实现且又行之有效的办法。     

用两颗GPS卫星确定低轨卫星轨道的初值方法

研究了用两颗全球定位系统（ＧＰＳ）卫星粗略确定低轨卫星轨道的问题,并着重讨论了其中的初值问题,给出了一种有效的初值方法。实验结果证明：这种方法能给出一个确定的、实用的初值,大大减少了初轨计算的计算量,并使得算法收敛更加有保障。在工程实用方面比传统的猜测方法具有较大的优势。     

非线性两点边值问题的六阶三对角差分法

讨论了满足边界条件y(a)=A 和y(b)=B 的二阶非线性常微分方程y″=f(x,y)的六阶三对角差分法,并从理论和实际计算证明了该方法的六阶收敛性。     

Dirichlet边界条件低阶面无法的改进

对基于内部Ｄｉｒｉｃｈｌｅｔ边界条件的低阶面元法的速度分布提出一个改进算法。由极限过程结合高阶奇异积分的解析计算直接计算物面速度分布取代传统的偶强梯度法,以避免偶极强度边缘外推的困难。改进算法改善了ＶＳＡＥＲＯ分析中诱导阻力系数估值过低的问题。对后掠翼、前掠翼和翼身组合体等算例的计算表明,计算结果的准确度与高阶面元法相近。此外,直接积分法还可正确地计算外部流场速度分布。这是偶强梯度法不能完成的。     

机翼平面形状参数摄动面元法

在内部Ｄｉｒｉｃｈｉｅｔ边界条件的基础上,藉助于对奇异积分的解析微分,可用解析法计算偶强密度对机翼平面形状乡数的敏感性偏导致（建立一般敏感性方程所需）。机翼平面形状参数摄动后其偶强分布即可藉线性外推得出。从而,压力分布、升力和俯仰力矩系数即可快速确定。振动面元法与相应的低阶面无法计算结果表明,该方法有良好的准确度且使计算工作量大大减少（摄动外推所需ＣＰＵ时间比相应的低阶面元法少两个量级）。