螺旋桨目标的ISAR回波信号建模与分析

建立了一种螺旋桨回波散射点叠加模型（BSPS）。给出了基于逆合成孔径雷达（ISAR）成像的螺旋桨调制模型（IBJEM）。根据螺旋桨的ISAR回波特性,对三种有不同螺旋桨结构的桨叶回波进行了成像仿真,讨论了螺旋桨结构参数对桨叶回波特性的影响。研究结果表明：该模型有较大的实用价值。     

基于神经网络的BTT导弹逆控制方案设计

对基于神经网络的倾斜转弯(BTT)导弹逆控制进行了研究。用径向基函数(RBF)神经网络结构和最近邻聚类算法,对导弹系统逆动力学系统进行动态模型辨识,以辨识模型为控制器与BTT导弹控制系统串联构成动态伪线性系统;用逆系统法设计了一种用于BTT导弹非线性控制的经典控制与神经网络在线自学习综合控制方案,实现了导弹三通道的线性化控制和输出的渐近无差跟踪。仿真结果表明:该方案可根据设计指标要求实现对BTT导弹的非线性控制,且有较强的鲁棒性。     

非常规机动操纵要求的计算

首先推导了飞机运动的逆动力学模型，为使问题具有一般性，采用了刚体运动模型，其中力方程建立在风轴系中，力矩方程建立在体轴系中，并且已知气动力模型，其次，由于飞行轨变地标位置（ｘ，ｙ，ｚ）的形式给出，因此构造了一种基于坐标位置的算法，当给定坐标值后，即可据此对逆问题进行求解并得出相应的操纵要求，最后以一种非常规机动动作为例进行了逆仿真，得出了操纵要求。     

Inverse identification of constitutive parameters of Ti2AlNb intermetallic alloys based on cooperative particle swarm optimization

Ti₂AlNb intermetallic alloy is a relatively newly developed high-temperature-resistant structural material, which is expected to replace nickel-based super alloys for thermally and mechanically stressed components in aeronautic and automotive engines due to its excellent mechanical properties and high strength retention at elevated temperature. The aim of this work is to present a fast and reliable methodology of inverse identification of constitutive model parameters directly from cutting experiments. FE-machining simulations implemented with a modified Johnson-Cook (TANH) constitutive model are performed to establish the robust link between observables and constitutive parameters. A series of orthogonal cutting experiments with varied cutting parameters is carried out to allow an exact comparison to the 2D FE-simulations. A cooperative particle swarm optimization algorithm is developed and implemented into the Matlab programs to identify the enormous constitutive parameters. Results show that the simulation observables (i.e., cutting forces, chip morphologies, cutting temperature) implemented with the identified optimal material constants have high consistency with those obtained from experiments, which illustrates that the FE-machining models using the identified parameters obtained from the proposed methodology could be predicted in a close agreement to the experiments. Considering the wide range of the applied unknown parameters number, the proposed inverse methodology of identifying constitutive equations shows excellent prospect, and it can be used for other newly developed metal materials.     

Double-decoupled inverse design of natural laminar flow nacelle under transonic conditions

The inverse design based on the pressure distribution is an essential approach to realize the improvement of Natural Laminar Flow(NLF) performance for nacelles. However, the direct definition of target pressure distribution at design point is challenging for the dilemma to consider the constraints of shock wave and laminar flow at the same time. In addition, the universality of method will be limited when the inverse design is strongly coupled with the solver. Thus, a double-decoupled methodolog...     

特征值反问题逼近解与极值化解的统一应用

基于矩阵最佳逼近与加权残值理论,本文把求解特征值反问题的矩阵逼近法和极值化方法统一为不同范数定义下的最小二乘问题。这对解决部分特征值和／或特征向量给足情况下的反问题提供了一个有效工具。结合工程实际,本文给出了具体应用的数值例子。     

Thick galactic cosmic radiation shielding using atmospheric data

NASA is concerned with protecting astronauts from the effects of galactic cosmic radiation and has expended substantial effort in the development of computer models to predict the shielding obtained from various materials. However, these models were only developed for shields up to about 120 g/cm² in mass thickness and have predicted that shields of this mass thickness are insufficient to provide adequate protection for extended deep space flights. Consequently, effort is underway to extend the range of these models to thicker shields and experimental data is required to help confirm the resulting code. In this paper empirically obtained effective dose measurements from aircraft flights in the atmosphere are used to obtain the radiation shielding function of the Earth's atmosphere, a very thick, i.e. high mass, shield. Obtaining this result required solving an inverse problem and the method for solving it is presented. The results are shown to be in agreement with current code in the ranges where they overlap. These results are then checked and used to predict the radiation dosage under thick shields such as planetary regolith and the atmosphere of Venus.     

Imaging of target with complicated motion using ISAR system based on IPHAF-TVA

The technique of imaging a target with a complicated motion using an Inverse Synthetic Aperture Radar (ISAR) system is an effective tool in the field of radar signal processing. After the translational compensation, the received signal reflected from the target can take the form of a multi-component Polynomial Phase Signal (m-PPS), and the high quality ISAR image can be provided via the combination between the estimated parameters of the m-PPS and the Range Instantaneous-Doppler technique (RID). For a target with a high maneuvrability, the occurrence of scatterers Migration Through Resolution Cell (MTRC), caused by the rotational movement could be appearing. That is why the variation in the amplitude of the echo during the time of observation cannot be neglected. The purpose of this study is the parameters estimation of the m-PPS signal with order three in the case of the Time Varying Amplitude (TVA). The Improved-version of the Product High-order Ambiguity Function (IPHAF) with TVA is proposed to improve the quality of the ISAR image compared with traditional techniques based on a constant amplitude; the experimental outcomes confirm that the new IPHAF-TVA method presented in this study is an effective technique to make the ISAR image very clear.     

逆金字塔式安全着陆点选择方法

针对现有地外天体软着陆安全着陆点选择方法的不足,设计了逆金字塔式安全着陆点选择方法,结合着陆器的落点精度和自主避障及地形坡度适应能力,建立了基于平整点、安全着陆点、可靠避障点和标称着陆点的地形安全性分析与定量搜索模型,该模型呈四层逆金字塔结构,每一层搜索的结果作为下一层搜索的输入,从弱约束到强约束逐步收敛至100%地形安全着陆区,嫦娥五号探测器飞行结果表明该方法能够快速确定安全着陆区及标称着陆点,并有效指导着陆下降过程的标称航迹设计和轨道控制策略制定。