A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

滑油量对恒速传动装置的影响

本文介绍了中外航空公司飞机发动机恒速传动装置几个故障典例及造成的危害,分析了填加滑油量不当对发动机恒速传动装置的影响,提出了预防措施。     

高频大电压标准器

主要阐述了该标准器的基本原理,从理论上对结构补偿法进行了分析和数学推导,当R/Z_o=1.9～2.0之间时,具有最小的交直流差。设计了匹配的同轴热电转换标准器;进行了误差分析;给出了试验结果,说明该标准器交直流差的重复性和复现性是好的。     

对高频电路原理图绘制问题的探讨

本文结合Protel 99 SE在高频PCB设计中的应用,着重探讨在电路原理图的绘制上需要重点注意的一些特殊问题,并提出解决问题的方法,尽可能地减小对高频PCB设计的影响,提高PCB设计的效率。     

基于高频导纳原理的液位传感器

介绍一种新型液位传感器。分析传统电容液位传感器在实用中的局限性,提出一种防挂料原理,变传统的单纯测量探头电容变化为测量在液位变化下探头的复阻抗的变化,并利用同步整流技术,抵消导电介质挂料造成的虚假信号。设计上,通过合理选取有关参数,避免了信号变换器和探头分置时分布电容的影响,使传感器可以用在高温介质测量场合。     

组合式三相双Buck宽变频逆变器

介绍了两态滞环电流控制型双Buck逆变器的电路结构和工作原理,对系统内环进行建模和分析。从理论上分析得到电流内环可以把LC二阶系统降阶为一阶系统,并将电流内环近似等效为一阶惯性环节,其时间常数主要取决于系统滤波电感的大小,并提出了一种滞环电流控制型逆变器输出滤波器的解耦设计方法,对宽变频输出时的输出滤波器进行优化设计。在此基础上进行三相组合式实验研究,通过数字控制技术实现逆变器系统具有360~800 H z宽变频输出。最后通过三相6 kVA原理样机,验证了本逆变器系统在全频率范围得到良好的输出电压波形和较高的效率,具有更广的应用前景。     

镀膜光纤声光相位调制器频率响应特性的研究

本文对光纤声光相位调制器（OF—AOPM）的频率特性进行研究。分析了OF—AOPM的调相原理，研究结果表明：在调制频率远离氧化锌压电薄膜的半波谐振频率的时候，光相位的调制不仅依靠径向应力。同时还依靠轴向应力。通过同时考虑径向和轴向应力的变化，得出了OF—AOPM在整个频率域范围内的响应特性。     

星载合成孔径雷达回波多普勒频率的计算

从星载合成孔径雷达（ＳＡＲ）与目标的相对运动关系出发，以ＳＡＲ发射信号的波长、卫星的轨道参数和目标的位置（地心经纬度）为已知条件，导出了计算目标回小以的多普勒频率的解析公式，这对于星载ＳＡＲ系统的性能 初步设计具有重要作用。     

固体火箭冲压发动机地面试验装置及测控系统

介绍了固体火箭冲压发动机地面实验装置及测控系统组成，功能、技术指标和可以开展的研究工作。     

基于FM-AM转换的伪码调相-载波调频复合引信信号的脉内特征提取研究

伪码调相和载波调频复合信号因具有好的距离、速度分辨率和测速测距精度,所以广泛应用在雷达和引信中。在电子对抗中为了实施欺骗性干扰,必须有效地提取复合信号的参数特征,为此本文研究了FM-AM转换时频分析的理论及其实现方法,并利用该方法对伪码调相-载波调频复合信号进行了脉内特征分析。具体包括伪码调相正弦载波信号、伪码调相复合正弦调频信号及伪码调相复合线性调频信号。仿真结果表明,在信噪比为5dB时,利用FM-AM转换时频分析技术,不但可以提取载波调频的特征信息,而且能够有效提取伪码的特征信息。