高超声速钝楔边界层转捩大涡模拟

 以五阶迎风和八阶对称格式混合差分格式求解三维可压缩滤波Navier-Stokes方程,对来流Mach数为6.0、半锥角5°的高超声速空间发展钝楔边界层转捩至完全湍流进行了大涡模拟。时间推进采用紧致存储三阶Runge-Kutta方法,亚格子尺度模型为Driest因子修正的Smagorinsky涡黏性模型。通过定常流场入口边界附近吹／吸引入不稳定扰动斜波的方法数值模拟得到了层流失稳转捩直至完全湍流的空间发展全过程。对扰动的线性、非线性增长以及湍流斑的形成和发展进行了分析,给出了转捩及完全湍流下的速度相关量统计并与实验、DNS结果进行了对比分析,计算结果与理论及实验吻合。     

基于传递函数方法的局部覆盖环状CLD圆柱壳动力学分析

 采用传递函数方法对局部覆盖环状约束层阻尼（CLD）圆柱壳进行了动力学分析。基于Donnell薄壳简化,由Hamilton原理导出了局部覆盖CLD圆柱壳的运动方程和边界条件,通过Laplace变换并引入状态向量后,建立了系统的状态空间方程,利用传递函数方法求解方程得到了系统的固有频率、〖JP2〗损耗因子和频响曲线。算例分析结果验证了该方法的有效性和精确性,且更适于处理黏弹性材料具有频变特性的问题。讨论了CLD覆盖率和黏弹层厚度对系统固有频率和损耗因子的影响,为局部覆盖CLD圆柱壳的优化设计奠定了基础。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

基于发射光谱法的螺旋波电推进器等离子体源放电实验研究

为探究不同气体条件下螺旋波电推进器等离子体源的放电特征,开展了氩气、氦气和氮气放电的光谱诊断实验研究。氩气和氦气为工质气体的放电条件下,部分波长谱线相对强度随功率的增加而增强,且斜率出现两次跳变,考虑是螺旋波放电过程中的模式转换,即容性向感性、感性向波模式的转换。三种工质气体,在较低的压强下,各谱线强度均随压强增大而迅速增强,但氩气放电下压强继续增大达到1.0Pa以后,谱线强度增强趋势变缓甚至达到“饱和”状态,而氦气和氮气放电下压强增大到0.5~0.65Pa,谱线强度出现降低趋势,氦气和氮气放电强度对压强更为敏感。     

水陆两栖飞机方向舵附面层控制研究

水陆两栖飞机采用增升手段降低起降速度后,需要提高方向舵的操纵能力。将吹气式附面层控制方法应用到水陆两栖飞机的垂尾上,建立其二维模型并进行数值模拟,设计垂尾安定面与方向舵之间的缝道挡板,防止迎风一侧的高压气流冲击背风面、阻碍吹气气流附着;研究垂尾安定面后缘和前缘吹气共同作用的组合吹气方案,防止方向舵较早失速。结果表明:垂尾采用吹气式附面层控制之后,结合缝道挡板和组合吹气,方向舵操纵能力可提高1倍左右。     

He-like Ar xvii triplet observed by RESIK

We present the observations of He-like Ar triplet lines obtained by RESIK spectrometer aboard CORONAS-F. Interpretation of intensity ratios between triplet lines of lower Z elements is known to provide useful diagnostics of plasma conditions within the emitting source. Here, we investigate whether triplet line ratios are useful for interpretation of higher Z element spectra. A high sensitivity, low background and precise absolute calibration of RESIK allow to consider in addition also the continuum contribution. This provides a way to determine the Ar absolute abundance from the observed triplet component ratios. The method is presented and the results are shown for two selected flares. Derived values of Ar absolute abundance for these flares are found to be similar: 2.6 × 10⁻⁶ and 2.9 × 10⁻⁶. They fall in the range between presently accepted Ar photospheric and coronal abundances.     

Remote upgrading of a space-borne instrument

The main purposes of experiment “Obstanovka” (“Environment” in Russian) consisting of several instruments are to measure a set of electromagnetic and plasma phenomena characterizing the space weather conditions, and to evaluate how such a big and highly energy consuming body as the International Space Station disturbs the surrounding plasma, and how the station itself is charged due to the operation of so many instruments, solar batteries, life supporting devices, etc. Two identical Langmuir electrostatic probes are included in the experiment “Obstanovka”. In this paper the Langmuir probes for “Obstanovka” experiment are described, including the choice of geometry (spherical or cylindrical), a more reliable method for the sweep voltage generation, an adaptive algorithm for the probe’s operation. Special attention is paid to the possibility for remote upgrading of the instrument from the ground using the standard communication channels.     

电弧加热发动机温度和速度的测量

本文着重介绍光谱辐射法、激光诱导荧光法、静电探针法等接触式和非接触式测量技术在电弧加热发动机 (Arcjet)参数测量中的应用。讨论了电子温度、重粒子温度、羽流速度等参数的测量 ,并对一些结果进行了分析与论证 ,指出非热力学平衡态下不同的测量技术测量的是不同的温度指标。从测量技术的发展来看 ,激光测量技术将成为参数测量的主导技术。     

等离子体表面技术的研究与应用

概述了离子注入、离子束沉积、等离子喷涂、离子镀、等离子体增强化学气相沉积、等离子体化学热处理和双层辉光离子渗金属等等离子体表面技术的基本原理和最新进展,并给出了部分典型实例。     

采用平面叶栅模拟压气机动叶叶尖间隙流

 通过对动叶叶尖进口端壁附面层的性状分析,指出采用平面叶栅模拟动叶叶尖间隙流端壁面静止(工况 1 )和仅有端壁面运动 (工况 2 )进口端壁附面层与真实情况的差异。根据转子静止静子转动这一相对运动思想设计出动叶叶尖间隙流实验模型 (工况 3)。对上述 3种工况叶片表面静压分布和叶尖间隙流进行了实验测量。实验表明:工况 3比 2,1叶尖间隙泄漏涡生成得早且间隙泄漏流量较大;采用无粘叶尖间隙流计算模型,在叶片后面部分计算结果与实测值吻合较好,而在叶片前缘部分由于流向压力梯度较大使得计算值大于实测值。