Libration point orbits for lunar global positioning systems

With the development of lunar exploration, a lunar global positioning system (LGPS) is demanded for both on-ground and in-flight lunar exploration missions. The traditional configuration of constellation requires at least eighteen satellites to cover the whole lunar surface continuously. In this paper, the configurations of the libration point orbits (LPOs) constellations are investigated. By using the constellations on the Earth–Moon _L1$L_1$ and _L2$L_2$ LPOs, the basic functions of the LGPS can be realized by using eight to fourteen satellites. First, the LPO and the combinations of LPOs, which can be used in the constellations of the LGPS, are investigated. The criteria and procedures of the configuration design are introduced. Second, the configurations of LPOs constellations are investigated in the Earth–Moon circular-restricted three-body problem (CR3BP). The size of the LPOs and the distribution of the satellites on these LPOs are determined by using an exhaustive algorithm and a global optimization method, respectively. The key performance parameters of these constellations are computed. Third, the constellations with good performance in the CR3BP are redesigned in the more accurate Earth–Moon based Sun-perturbed bicircular four-body problem (B4BP). Moreover, in order to avoid the ground coverage problem caused by the perturbation of the Sun, some modifications are implemented, and the configuration of the no blind area LGPS in the B4BP is obtained.     

基于人机合作的无人机实时航迹规划

针对复杂多变的战场环境,无人机(UAV)在执行任务遇到突发威胁时,提出了一种人机合作的实时航迹规划方法。由人决策和分析威胁信息,给出规避方向和任务紧急程度,无人机据此采用模糊推理的方法,自主解算得到引导点的位置,牵引无人机改变航向,规避突发威胁。仿真结果表明,采用人机合作的实时航迹规划可以将人的智能决策和无人机的快速计算能力有机结合起来,规划更加优化的航迹,能动态调整引导点的位置,可根据任务的紧急程度灵活选择规避路径。     

面天线检测数据处理方法的探讨

对面天线检测数据处理方法作了一些有益的探讨。从获取被测物的三维坐标后到获取真正有用的信息这一过程需要经过坐标转换和表面误差计算两个步骤 ,其中坐标转换是关键。在坐标转换方面 ,文中提出了曲面自由拟合、公共点转换和CAD面型转换三种方法 ,阐述了这些方法的数学模型 ,并且用实测数据进行了验证计算。理论分析和实际计算两方面显示 :CAD面型转换法既不需要天线的曲面方程 ,也不需要有已知的公共点 ,结果准确、可靠 ,是一种理想的方法 ;如果没有天线的CAD面型 ,但却存在公共点时 ,公共点转换法也是较理想的方法 ,其结果与给定的公共点误差有关 ;如果既没有天线的CAD面型又无公共点或公共点误差很大时 ,只能采用曲面自由拟合法 ,该法准确度最高 ,但容易使天线面型产生错位现象     

一种新型恒温—温补晶体振荡器

提出了一种ＯＣＸＯ的恒温控制方法。该方法是利用乙醇的沸点制成换态式恒温箱。这种温度控制方法既可以用作中准确度的ＯＣＸＯ，又可以作为精密双层控温ＯＣＸＯ的外层恒温装置，还可以与简单的温补线路结合，构成高准确度的ＯＴＣＸＯ。     

载波相位辅助的GPS动态单点定位算法综述

对载波相位辅助条件下应用于全球定位系统（Global Positioning System,GPS）动态单点定位的各种算法进行了综合分析与比较。首先简要介绍定位算法中的基本公式与观测模型;然后分别对周跳修复与滤波解算两部分所应用的各种算法进行详细介绍并比较其性能与适用范围;最后对尚待解决的问题及可能的发展方向进行了总结。     

Evolution of periodic orbits near the Lagrangian point L2

A study of the evolution of the periodic and the quasi-periodic orbits near the Lagrangian point L₂, which is located to the right of the smaller primary on the line joining the primaries and whose distance from the more massive primary is greater than the distance between the primaries, in the framework of restricted three-body problem for the Sun–Jupiter, Earth–Moon (relatively large mass ratio) and Saturn–Titan (relatively small mass ratio) systems is made. Two families of periodic orbits around the smaller primary are identified using the Poincaré surface of section method – family I (initially elliptical, gradually becomes egg-shaped with the increase in the Jacobi constant C and elongated towards the more massive primary) and family II (initially egg-shaped orbits elongated towards L₂ and gradually becomes elliptical with the increase in C). The family I in the Sun–Jupiter and Saturn–Titan systems contains two separatrix caused by third-order and fourth-order resonances, while the Earth–Moon system has only one separatrix which is caused by third-order resonances. Also in the Sun–Jupiter and the Saturn–Titan systems, family I merge with family II, around Jacobian constant 3.0393 and 3.0163, respectively, while in the Earth–Moon system, family II evolves separately from two different branches. The two branches merge at C = 3.184515. In the Earth–Moon system, the family II contains a separatrix due to third-order resonances which is absent in the other two systems.     

基于全局稀疏地图的AGV视觉定位技术

为了实现自动导引车（AGV）在复杂工业环境下的高精度定位,克服环境变化给定位带来的影响,提出了基于全局稀疏地图的视觉定位方法。首先,设计了大容量二维编码点,作为人工路标铺设在工业环境的地面;然后,基于一种四边形识别算法,在复杂工业环境中准确分割和识别二维编码点;最后,利用二维编码点提供的编码信息,鲁棒匹配图像中的特征点,并以此为基础,使用一种分参数块优化的三维重建策略,实现了工业环境的大规模地图构建,为AGV视觉定位提供了一种稀疏电子地图。AGV视觉的定位通过匹配车载视觉传感器图像中的特征点和稀疏电子地图实现。停车重复定位精度小于0.5 mm,角度偏差小于0.5°,轨迹平均位移误差小于0.1%。实际应用结果表明,该方法能在复杂工业环境中实现AGV视觉的定位,定位的速度和精度方面都满足工业应用的要求,为AGV的视觉定位提供了新的思路。      

空间非合作目标的多视角点云配准算法研究

为了提高相邻视角间稀疏扫描点云数据配准的速度和精度,实现多视角点云精确配准,提出一种基于KD Tree点云均匀采样简化算法,并且对传统四点算法（4 PointsCongruentSetsAlgorithm,4PCS）中的阈值参数进行了统一,确定了各误差阈值参数和点云密度之间的关系,通过基于姿态校正的方法有效解决了对称视角点云引起的误配准问题。仿真结果表明,该方法能够快速、有效地实现卫星稀疏点云的配准。     

终端区点融合进近程序设计方法研究

流量的增长导致终端区拥挤和航班延误,增大了管制压力和公司成本.以长沙黄花国际机场36号跑道为例,空城受限,4条航线汇聚一点,梯度曲折多变,航班排序难,指挥复杂度高.结合我国飞行程序设计和管制间隔要求,根据点融合的基本概念,设计跑道点融合进近程序,确定相关参数.对程序进行容量和下降梯度评估表明,静态容量可达到63架次/h,是当前运行最大流量的3.7倍;下降梯度得到明显改善,为连续下降实施奠定了基础.