Validation of non-linear split window algorithm for land surface temperature estimation using Sentinel-3 satellite imagery: Case study; Tehran Province,Iran

In recent years, land surface temperature (LST) has become critical in environmental studies and earth science. Remote sensing technology enables spatiotemporal monitoring of this parameter on large scales. This parameter can be estimated by satellite images with at least one thermal band. Sentinel-3 SLSTR data provide LST products with a spatial resolution of 1 km. In this research, direct and indirect validation procedures were employed to evaluate the Sentinel-3 SLSTR LST products over the study area in different seasons from 2018 to 2019. The validation method was based on the absolute (direct) evaluation of this product with field data and comparison (indirect) evaluation with the MODIS LST product and the estimated LST using the non-linear split-window (NSW) algorithm. Also, two emissivity estimation methods, (1) NDVI thresholding method (NDVI-THM) and (2) classification-based emissivity method (CBEM), were used to estimate the LST using the NSW method according to the two thermal bands of Sentinel-3 images. Then, the accuracy of these methods in estimating LST was evaluated using field data and temporal changes of vegetation, which the NDVI-THM method generated better results. For indirect evaluation between the Sentinel-3 LST product, MODIS LST product, and LST estimated using NSW, four filters based on spatial and temporal separates between pairs of pixels and pixel quality were used to ensure the accuracy and consistency of the compared pairs of a pixel. In general, the accuracy results of the LST products of MODIS and Sentinel-3, and LST estimated using NSW showed a similar trend for LST changes during the seasons. With respect to the two absolute and comparative validations for the Sentinel-3 LST products, summer with the highest values of bias (?1.24 K), standard deviation (StDv = 2.66 K), and RMSE (2.43 K), and winter with the lowest ones (bias of 0.14 K, StDv of 1.13 K, and RMSE of 1.12 K) provided the worst and best results for the seasons in the period of 2018–2019, respectively. According to both absolute and comparative evaluation results, the Sentinel-3 SLSTR LST products provided reliable results for all seasons on a large temporal and spatial scale over our studied area.     

虚拟多触角探测的高超声速滑翔飞行器再入机动制导

针对高超声速滑翔飞行器再入过程中面对的多约束问题，提出一种基于虚拟多触角探测的路航点规划机动制导策略。该机动制导策略通过飞行器最大转弯轨迹计算速度-剩余地面距离-航向角约束，在分段定点模式中发出多条粗略预测触角，引用触角末端反馈的信息计算优先级以确定临时路航点；同时在机动制导模式中发出精细探测触角，计算触角末端信息优先级，经倾侧角延时滤波器得出控制指令，对飞行器进行机动制导。基于多触角探测的路航点规划机动制导策略，降低了三触角机动制导方法中的计算时间；同时，4种典型禁飞区条件下的仿真结果表明，该策略能够有效稳定地解决机动制导过程中的多约束问题。     

基于Mecanum轮配送车的视觉与磁带双重导引技术研究

针对卫星总装过程中提出的物料配送需求,设计并实现了以Mecanum轮全方位移动平台为基础,可在狭窄配送通道内快速、灵活移动的智能物料配送车。结合总装现场实际环境条件,配送车采用了视觉导引与磁带导引相结合的智能导引策略,有效消除了光照强度变化、地面裂纹、电磁信号干扰等环境因素对车道线采集的影响,最终实现总装物料从库房至多工位的自动配送。     

过虚拟交班点的能量最优制导律

针对固定目标的导弹过虚拟交班点制导问题，在希尔伯特空间下，基于最优化理论设计了有无终端落角约束两种情况下的全局能量最优制导律。通过对模型进行线性化，将提出的最优制导模型转化为线性二次型最优控制问题，在此基础上利用零控脱靶量（ZEM）概念对系统模型进行降阶，并推导出解析解。设计的制导律可以使导弹准确经过虚拟交班点，并实现期望终端落角。仿真结果表明，与经典制导律对比，该制导律可以显著减少全局控制能量消耗。     

结构光三维视觉系统研究

介绍了结构光三维视觉原理,在广义坐标系中采用投影和透视变换理论建立了结构光三维视觉模型。在此基础上,提出了基于非线性最小二乘法的模型参数标定方法,并建立了结构光三维视觉系统,给出了实验结果。     

终端区域理想速度剖面的生成

本文着重探讨了飞机进入终端区域后理想速度剖面的生成问题,目的是通过执行理想剖面生成算法,达到对飞机进行精确的时间控制,消除等待时间,提高机场利用率,达到节省燃料减少延误的目的。     

基于速度预测的导引律剩余时间估计

将分段线性逼近与迭代求解的思想扩展到对导弹的时变速度进行分段预测,给出了适用于反舰导弹速度时变情况的大前置角下比例导引律和偏置比例导引律的剩余时间估计算法。该算法在现有分段迭代算法的基础上,依据闭环形式的反舰导弹速度微分方程,分转弯平飞段和近似直线飞行段2种情况,对导弹未来速度的大小进行分段迭代预测并对剩余时间估计进行修正。算法中还给出了偏置比例导引律作用下近似直线飞行段剩余飞行航程的估计公式。仿真结果验证了本文算法的有效性。     

混合高斯测量噪声下的多模型滤波

就带有混合高斯测量噪声的离散时间系统 ,提出了一种简化的多模型滤波。理论分析证明该滤波方法用较少的计算量得到了与交互多模型滤波相同的估计性能。为满足应用要求 ,给出了该滤波器的数值鲁棒实现方法。一个关于仅有方位测量的制导例子验证了该滤波算法的有效性。     

利用视加速度补偿和推力逐级释放的垂直着陆制导方法

针对运载火箭子级垂直返回着陆段的制导问题,本文在应用凸优化的滚动时域在线规划基础上研究了制导鲁棒性的改善策略。为应对着陆后期控制能力不足的情况,在滚动规划过程中引入了推力上界逐级释放的策略。同时,考虑缓解干扰和误差累积的影响,在制导周期内引入视加速度信息对在线规划的推力指令进行补偿,以进一步改善滚动规划的递归可行性。最后,通过数值算例仿真及对比分析验证所提出的补偿策略的有效性。     

An adaptive fast fixed-time guidance law with an impact angle constraint for intercepting maneuvering targets

Sliding mode guidance laws based on a conventional terminal sliding mode guarantees only finite-time convergence, which verifies that the settling time is required to be estimated by selecting appropriate initial launched conditions. However, rapid convergence to a desired impact angle within a uniform bounded finite time is important in most practical guidance applications. A uniformly finite-time/fixed-time convergent guidance law means that the convergence (settling) time is predefined independently on initial conditions, that is, a closed-loop convergence time can be estimated a priori by guidance parameters. In this paper, a novel adaptive fast fixed-time sliding mode guidance law to intercept maneuver targets at a desired impact angle from any initial heading angle, with no problems of singularity and chattering, is designed. The proposed guidance law achieves system stabilization within bounded settling time independent on initial conditions and achieves more rapid convergence than those of fixed-time stable control methods by accelerating the convergence rate when the system is close to the origin. The achieved acceleration-magnitude constraints are rigorously enforced, and the chattering-free property is guaranteed by adaptive switching gains. Extensive numerical simulations are presented to validate the efficiency and superiority of the proposed guidance law for different initial engagement geometries and impact angles.