火箭发动机涡轮泵故障检测及预测算法研究

涡轮泵作为液体火箭发动机的核心部件,恶劣的工作环境和极高的转速使其易发生组件断裂、烧蚀等问题。为了对液体火箭发动机的涡轮泵进行健康管理,提出针对某型液体火箭发动机涡轮泵的数据驱动故障检测、故障预测及健康状态评估方法。在某型液体火箭发动机试车数据集上,通过对涡轮泵轴、径、切向振动数据进行对应的时域、频域特征处理后,送入训练好的ResNet网络、自主设计的图像特征识别算法以及退化模式线性回归模型,分别实现了对该型液体火箭发动机涡轮泵的故障检测、预测及健康状态评估,具有较高的准确性。     

旋转固体火箭发动机内弹道理论与实验研究

本文系统地总结了我们在旋转固体火箭发动机内弹道理论与实验研究方面的某些成果，其中包括含铝丁羟推进剂的试片实验和装药发动机实验以及燃速敏感性预示和内弹道预示，得出了一些有益的结论，可供发动机设计及推进剂配方设计参考。     

某型号液体火箭发动机可靠性分析

基于逐步增加Ⅱ型截尾样本,讨论了某型号液体火箭发动机可靠性指标的Bayes估计及E-Bayes估计.在刻度平方误差损失函数下,给出了火箭发动机寿命分布参数、可靠度函数及失效率函数的Bayes估计及E-Bayes估计.最后运用Monte Carlo方法对各种估计的均方误差进行了模拟比较.结果表明,E-Bayes估计给出的估计精度高.     

Stability analysis of an aeroelastic system with friction

In this paper, harmonic balance method, exact formulation and numerical simulation method are adopted to study the effects of different friction stiffness on the stability of 1.5 degrees of freedom aeroelastic system. On this basis, the expressions of input energy and dissipated energy are deduced, and the energy method is used to reveal the mechanisms of the stable boundary and unstable boundary existing in the system and the effects of different friction stiffness on the stability of the system. Studies have shown that the stability region and the critical aerodynamic damping ratio of the system rise with the increase of the friction stiffness, while the friction stiffness has little effect on the stability boundary. In the analysis of the stability of system, the results of harmonic balance method, exact formulation and Newmark of numerical simulation method are in good agreement. Compared with exact formulation and numerical simulation method, the concept and conclusion of harmonic balance method are simple in the system stability analysis.     

基于开路电压法的电池荷电状态估计误差校正

本文提出分别研究电池开路电压在充电结束后停置过程和放电结束后停置过程的不同变化规律,并考虑了不同停置时间在两个过程中的作用和影响,从而达到提高开路电压法估算荷电状态精度的效果。实验验证表明,此方法的精度比传统开路电压法更加准确。     

Mechanism analysis of hysteretic aerodynamic characteristics on variable-sweep wings

Variable-sweep wings have large shape-changing capabilities and wide flight envelops, which are considered as one of the most promising directions for intelligent morphing UAVs. Aerodynamic investigations always focus on several static states in the varying sweep process, which ignore the unsteady aerodynamic characteristics. However, deviations to static aerodynamic forces are inevitably caused by dynamic sweep motion. In this work, first, unsteady aerodynamic characteristics on a typical variable-sweep UAV with large aspect ratio were analyzed. Then, deep mechanism of unsteady aerodynamic characteristics in the varying sweep process was studied. Finally, numerical simulation method integrated with structured moving overset grids was applied to solve the unsteady fluid of varying sweep process. The simulation results of a sweep forward-backward circle show a distinct dynamic hysteresis loop surrounding the static data for the aerodynamic forces. Compared with the static lift coefficients , at the same sweep angles, dynamic  lift coefficient in sweep forward process are all smaller, while dynamic sweep backward  lift coefficient are all larger. In addition, dynamic deviations to static  lift coefficient are positively related with the varying sweep speeds. Mechanism study on the unsteady aerodynamic characteristics indicates that three key factors lead to the dynamic hysteresis loop in varying sweep process. They are the effects of additional velocity caused by varying sweep motion, the effects of flow hysteresis and viscosity. The additional velocity induced by sweep motion affects the transversal flow direction along the wing and the effective angle of attack at the airfoil profile. The physical properties of flow, the hysteresis and viscosity affect the unsteady aerodynamic characteristics by flow separation and induced vortexes.     

Digital fixed-frequency hysteresis current control of a BLDC motor applied for aerospace electrically powered actuators

In the conventional cascade control structure of aerospace electrically powered actuators, the current (or electromagnetic torque) loop plays a critical role in realizing a rapid response for a digitally controlled BrushLess Direct Current (BLDC) motor. Hysteresis Current Control (HCC) is an effective method in improving the performance of current control for a BLDC motor. Nevertheless, the varying modulating frequency in the traditional HCC causes severe problems on the safety of power devices and the electromagnetic compatibility design. A triangular carrier-based fixed-frequency HCC strategy is expanded by relaxing the constraints on the rising and descending rates of the winding current to advance the capability of HCC to realize fixed-frequency modulation in the steady state. Based on that, a new flexible-bound-size quasi-fixed-frequency HCC is proposed, and the range feasible to realize fixed-frequency modulation control can cover the entire running process in the steady state. Meanwhile, a corresponding digital control strategy is designed, and four digitalization rules are proposed to extend the capacity to achieve fixed-frequency modulation control to the unsteady working state, that is, a novel fixed-frequency modulation is realized. Simulation and experimental results prove the effectiveness of this improved fixed-frequency HCC strategy.     

大中型船用电机轴电压测定方法的研究

轴电压对电机轴承的破坏,引起了国内外许多电蚀事故,并造成船舶严重的设备损伤和船东的经济损失。通过研究不同参数类型船用电机的轴电压问题,介绍了轴电压产生原因、测量方法,实测装配不同类型轴承电机的轴电压,并提供了预防轴电压的实用方法。这有利于减少和避免轴电压产生所带来的机损危害。     

基于FPGA的星载步进电机控制电路设计

针对航天设备在轨运行时间长、不易更换的特点,提出了一种力矩宽且范围可调的步进电机控制电路设计。该电路原理样机以Xilinx公司的XC3S400pq-208型FPGA为核心控制芯片,以LMD18200为步进电机驱动芯片。在对电路总体设计进行介绍的基础上,重点阐述了航天过程中步进电机阻力矩增加的问题,以及通过脉冲频率和PWM控制技术调节输出力矩的方法。试验结果表明,力矩可调范围的最大值能够使力矩裕度达到4,匹配步进电机在轨运行过程中的力矩要求。     

Design and Optimization of 3D Radial Slot Grain Configuration

Upper stage solid rocket motors (SRMS) for launch vehicles require a highly efficient propulsion system. Grain design proves to be vital in terms of minimizing inert mass by adopting a high volumetric efficiency with minimum possible sliver. In this article, a methodology has been presented for designing three-dimensional (3D) grain configuration of radial slot for upper stage solid rocket motors. The design process involves parametric modeling of the geometry in computer aided design (CAD) software through...