民用飞机试飞阶段人为因素适航审定技术研究

随着飞机各系统可靠性的不断提高,人为失误逐渐成为系统失效或造成飞行事故的主要因素,已成为设计及适航审定部门关注的重难点问题.当前国内外对于如何验证人为因素是否满足相关适航条款的要求仍处于理论探索阶段.针对上述问题,基于CCAR-25部条款分析试飞阶段民用飞机人为因素适航审定过程,包括基于SHELL模型及T.E.S.T矩阵的人为因素审定条款筛选,基于MOC5&MOC6的试验机符合性验证方法,并基于模糊评判方法给出数据分析实例.本文提出的人为因素适航审定思路及验证方法具有一定创新性,已在试飞阶段ARJ21-700飞机上初步应用,可为后续C919等民用飞机人为因素设计和适航审定提供技术支持和方法保证.     

基于微多普勒特征的人体上肢运动参数估计

人体行走的雷达特征研究是近年发展起来的新的研究方向,基于雷达的人体目标探测在安全防护、灾害救援、生物力学和运动学研究等方面具有广阔的应用前景。人体走动时手和腿的摆动对回波信号产生调制,回波信号的微多普勒特征能精细地刻画体动规律,将有效地探测并估计人体的运动规律。主要研究人体上肢的雷达特征,首先以人体上肢的运动模型为基础,建立了其雷达回波模型,通过理论分析得到了参数估计的方法,通过广义Radon变换提取行人摆臂的微多普勒。最后通过仿真实验,验证了算法的有效性。     

过氧化氢/紫外线/臭氧氧化技术处理肼类污水的应用

采用放大试验规模（处理量1 m³/h）的H₂O₂（过氧化氢）/UV（紫外线）/O₃（臭氧）氧化技术处理肼类推进剂污水,在30.0±1.6 ℃,pH=9.0±0.2的条件下,研究肼类的过氧化氢增强光解臭氧化降解。对比不同氧化技术的协同效应以及对污水降解的影响,重点考察过氧化氢、紫外线、臭氧和初始浓度等工艺参数对降解效果的影响,对氧化技术的应用进行了优化。研究结果表明：该技术可使COD去除率提高27.66%,肼类的降解速率随着过氧化氢投加量、紫外线辐射强度、O₃投加速率和水质地提高而升高,随着初始质量浓度的提高而下降。在最佳工艺下,处理5 000 mg/L质量浓度的废水,处理60 min时,COD去除率分别为98.62%（偏二甲肼）、99.17%（甲基肼）、99.94%（肼）和93.25%（单推-3）。     

基于人的认知失误分析模型的跑道侵入风险评估研究

本文主要对导致跑道侵入的人为因素进行研究分析,运用认知可靠性与失误分析法(CREAM)的认知模型建立跑道侵入风险评估模型,并以南苑机场为实例验证该模型的可靠性,计算出来的南苑机场发生跑道侵入事件的风险值较为合理,结果表明运用人的可靠性分析模型对跑道侵入的风险进行评估具有实用价值。     

垃圾焚烧灰渣用于二灰碎石路面基层的试验研究

用城市生活垃圾焚烧灰渣替代部分集料,按照9种不同的配比制备二灰灰渣碎石路面基层材料,进行路用性能试验。结果表明:与普通二灰碎石对比,在相同的二灰含量下,灰渣碎石的最大干密度降低8.8%,而最佳含水量增大38.4%;无侧限抗压强度最高可达1.03 M Pa;粉煤灰含量对材料强度影响较为显著,其中粉煤灰含量减少1%,无侧限抗压强度值降低21%;材料的干缩系数最大为67.2μ/%;石灰与粉煤灰含量越低,材料的干缩应变越小,平均干缩系数也越小,当二灰含量减少2.5%,平均干缩系数降低3.1%。二灰灰渣碎石材料满足基层的相关要求,灰渣可以为公路建设提供可持续的集料来源。     

Planetary protection issues related to human missions to Mars

In accordance with the United Nations Outer Space Treaties [United Nations, Agreement Governing the Activities of States on the Moon and Other Celestial Bodies, UN doc A/RES/34/68, resolution 38/68 of December 1979], currently maintained and promulgated by the Committee on Space Research [COSPAR Planetary Protection Panel, Planetary Protection Policy accepted by the COSPAR Council and Bureau, 20 October 2002, amended 24 March 2005, http://www.cosparhq.org/scistr/PPPolicy.htm], missions exploring the Solar system must meet planetary protection requirements. Planetary protection aims to protect celestial bodies from terrestrial contamination and to protect the Earth environment from potential biological contamination carried by returned samples or space systems that have been in contact with an extraterrestrial environment. From an exobiology perspective, Mars is one of the major targets, and several missions are currently in operation, in transit, or scheduled for its exploration. Some of them include payloads dedicated to the detection of life or traces of life. The next step, over the coming years, will be to return samples from Mars to Earth, with a view to increasing our knowledge in preparation for the first manned mission that is likely to take place within the next few decades. Robotic missions to Mars shall meet planetary protection specifications, currently well documented, and planetary protection programs are implemented in a very reliable manner given that experience in the field spans some 40 years. With regards to sample return missions, a set of stringent requirements has been approved by COSPAR [COSPAR Planetary Protection Panel, Planetary Protection Policy accepted by the COSPAR Council and Bureau, 20 October 2002, amended 24 March 2005, http://www.cosparhq.org/scistr/PPPolicy.htm], and technical challenges must now be overcome in order to preserve the Earth’s biosphere from any eventual contamination risk. In addition to the human dimension of the mission, sending astronauts to Mars will entail meeting all these constraints. Astronauts present huge sources of contamination for Mars and are also potential carriers of biohazardous material on their return to Earth. If they were to have the misfortune of being contaminated, they themselves would become a biohazard, and, as a consequence, in addition to the technical constraints, human and ethical considerations must also be taken into account.     

Early effects of low dose C ion or X-ray irradiation on human peripheral blood lymphocytes

The aim of this study was to estimate the acute effects of low dose ¹²C⁶⁺ ions or X-ray radiation on human immune function. The human peripheral blood lymphocytes (HPBL) of seven healthy donors were exposed to 0.05 Gy ¹²C⁶⁺ ions or X-ray radiation and cell responses were measured at 24 h after exposure. The cytotoxic activities of HPBL were determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT); the percentages of T and NK cells subsets were detected by flow cytometry; mRNA expression of interleukin (IL)-2, tumor necrosis factor (TNF)-α and interferon (IFN)-γ were examined by real time quantitative RT-PCR (qRT-PCR); and these cytokines protein levels in supernatant of cultured cells were assayed by enzyme-linked immunosorbent assays (ELISA). The results showed that the cytotoxic activity of HPBL, mRNA expression of IL-2, IFN-γ and TNF-α in HPBL and their protein levels in supernatant were significantly increased at 24 h after exposure to 0.05 Gy ¹²C⁶⁺ ions radiation and the effects were stronger than observed for X-ray exposure. However, there was no significant change in the percentage of T and NK cells subsets of HPBL. These results suggested that 0.05 Gy high linear energy transfer (LET) ¹²C⁶⁺ radiation was a more effective approach to host immune enhancement than that of low LET X-ray. We conclude that cytokines production might be used as sensitive indicators of acute response to LDI.     

含能材料废料处理技术研究述评(Ⅰ)——安全销毁技术

概括了国内外固体推进剂、火炸药等含能材料(EM)废料处理技术的发展情况,介绍了缩小EM废料尺寸的高压液体切割技术和使EM废料脱敏的碱解法和乳化法等预处理技术,EM废料安全销毁的熔盐销毁(MSD)法、水热氧化(HTO)法、电化学法、湿空气氧化法等化学销毁技术以及堆肥合成、生物降解和生物转化的生物销毁技术。其中预处理与化学、生物处理相结合的综合销毁技术可以实现含能材料废料的安全销毁,最后分析了EM废料安全销毁技术研究的主要特点和发展趋势。     

利用地月间空间站的载人登月飞行模式分析

为提高空间站利用率,降低载人登月任务成本,有效开发地月空间,研究了基于地月空间不同轨道空间站的载人登月飞行模式。首先对比直接往返登月飞行模式,对基于空间站的载人登月飞行模式进行任务分析,通过空间站将载人登月任务解耦为载人天地往返任务和登月任务两部分;其次通过轨道设计和稳定性分析提出考虑登月任务需求的地月间空间站可运行轨道和停泊点;最后建立一套飞行模式评价模型,从速度增量需求、飞行时间、空间环境、登月任务窗口、测控条件、交会对接技术难度、后续任务支持性和任务可靠性方面对6种不同位置空间站的登月飞行模式进行分析和定量评价。评价结果表明基于L2点Halo轨道空间站的载人登月飞行模式为更优飞行模式。     

椭圆的数控加工宏程序编制

根据华中世纪星数控系统及固定循环指令特点,将椭圆型腔的粗加工、精加工程序编制成固定循环格式,用户在加工过程中只需要用指令调用即可。这样在加工过程中大大缩短程序编制时间,提高数控宏程序的集成度,使数控机床高效、高精度的潜力被充分挖掘。