Relay selection in cooperative communication systems over continuous time-varying fading channel

In this paper, we study relay selection under outdated channel state information (CSI) in a decode-and-forward (DF) cooperative system. Unlike previous researches on cooperative commu-nication under outdated CSI, we consider that the channel varies continuously over time, i.e., the channel not only changes between relay selection and data transmission but also changes during data transmission. Thus the level of accuracy of the CSI used in relay selection degrades with data transmission. We first evaluate the packet error rate (PER) of the cooperative system under contin-uous time-varying fading channel, and find that the PER performance deteriorates more seriously under continuous time-varying fading channel than when the channel is assumed to be constant during data transmission. Then, we propose a repeated relay selection (RRS) strategy to improve the PER performance, in which the forwarded data is divided into multiple segments and relay is reselected before the transmission of each segment based on the updated CSI. Finally, we propose a combined relay selection (CRS) strategy which takes advantage of three different relay selection strategies to further mitigate the impact of outdated CSI.     

基于扩张状态观测器的动态逆过失速机动飞行控制

针对飞机过失速机动飞行控制问题,提出了一种将动态逆与扩张状态观测器相结合进行扰动估计补偿的新思路。根据时标分离原则将飞机状态分为快变量和慢变量,并分别设计了两个回路的动态逆控制器。在快慢回路分别引入扩张状态观测器对系统的不确定部分进行估计补偿,抵消不确定部分对系统动态特性的影响。最后对控制律进行了过失速机动仿真。结果表明,在存在较大参数摄动情况下,设计的控制律能控制飞机跟踪控制指令,表现出良好的稳定性和鲁棒性。     

基于数据的发动机模型匹配方法研究

针对在使用环境条件下发动机部件特性未知的问题,为获得在实际装机条件下的发动机部件特性,采用1种基于参考数据的发动机部件级模型匹配方法,在对测量数据和模型特征分析的基础上,选取适当调整参数,以模型在非设计点的仿真输出与参考数据的匹配精度为目标,通过迭代方法求解部件特性。仿真数据表明:采用基于数据的发动机匹配技术得到的发动机模型,其仿真输出与参考数据的偏差均在允许范围内。利用该方法可以得到在使用条件下的发动机部件特性,为装机状态发动机的仿真预测提供技术支撑。     

关于 3D和2D型SPin态的拓扑分类的注记

对铁磁体中的Ｓｐｉｎ态进行拓扑分类在物理学上有重要意义。本文用代数拓扑学中的Ｍａｙｅｒ－Ｖｉｅｔｏｒｉｓ正合序列计算了一类空间区域Ω的第一、二个整系数上同调,从而对占据该区域的铁磁体的３Ｄ和２Ｄ型Ｓｐｉｎ态进行了拓扑分类,这里所论的铁磁体中含有若干环状和穿过其中的柱状空腔,而且环状空腔可以是互相缠绕的。最后还讨论了这类铁磁体中的矢量场和标量场的某些全局性质。     

某测试台谐波摇摆运动的控制

某测试台主要运动方式为三自由度正弦摇摆Asinωt,三次谐波摇摆。本文详细阐述了该设备三次谐波谱的精密运动控制、在线实时轨迹显示和静态FFT分析。     

Crew autonomy for deep space exploration: Lessons from the Antarctic Search for Meteorites

Future piloted missions to explore asteroids, Mars, and other targets beyond the Moon will experience strict limitations on communication between vehicles in space and control centers on Earth. These limitations will require crews to operate with greater autonomy than any past space mission has demonstrated. The Antarctic Search for Meteorites (ANSMET) project, which regularly sends small teams of researchers to remote parts of the southern continent, resembles a space mission in many ways but does not rely upon a control center. It provides a useful crew autonomy model for planners of future deep space exploration missions. In contrast to current space missions, ANSMET gives the crew the authority to adjust competing work priorities, task assignments, and daily schedules; allows the crew to be the primary monitor of mission progress; demands greater crew accountability for operational errors; requires the crew to make the most of limited communication bandwidth; adopts systems designed for simple operation and failure recovery; and grants the crew a leading role in the selection and stowage of their equipment.     

太赫兹固态电子器件和电路

随着微电子技术的飞速发展,半导体器件的截止频率已经进入到太赫兹频段,太赫兹电路的频率特性特性得到极大发展。以固态器件为基础的电路的工作频率进入到太赫兹频段。太赫兹固态电子器件与电路技术在空间领域有着重要的应用前景。文章重点介绍InP基三端太赫兹固态电子器件和电路,以及太赫兹肖特基二极管器件和电路的技术发展过程与最新动态。并指出随着器件与电路的整体化与集成化发展趋势,太赫兹单片集成技术是其未来发展方向。     

Pilots for space tourism

This article sheds light on the key player needed for any space tourism adventure: the pilot who flies the spacecraft. The paper addresses the potential benefits of including a pilot at the controls when designing a space tourism spacecraft. It examines the basic qualifications and advanced skills required of space tourism pilots and discusses key training requirements for selected pilots and space pilots' pay and benefits. In addition, the research concludes that, just as the pioneers of passenger transport in aviation entertained and captured the interest of their passengers, the space pilot should have the skills of a tour guide.     

一种基于机动辨识预测的空空导弹导引律

现有的空空导弹导引头在有噪声和干扰的环境下获得目标精确信息存在时间延迟,且新一代目标的机动能力更强,不对导弹加以补偿会造成较大脱靶量,所以需对目标状态有效预测。针对新一代目标规避空空导弹常用的大机动模式,为满足新一代空空导弹发展需求,设计了一种新型复合导引律。从目标自身出发,研究高机动目标规避导弹采用的典型机动形式,对机动轨迹进行离线建模,构建具有扩展能力的目标机动模型库。设计自适应滤波器对测量噪声进行降噪。同时,利用模型库设计了机动辨识预测器,对目标实际机动进行在线辨识。基于在线辨识的结果对目标机动进行预测,并对时间延迟进行补偿和修正,实现对高机动目标的精确打击。仿真结果表明:该方法对不同类型的机动目标均有较高的预测精度和命中精度。     

Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.