质子引发的单粒子翻转率估算的研究

根据质子单粒子翻转事件的物理本质,及空间高能质子环境特性,给出了一种基于重离子单粒子翻转实验数据基础之上的估算质子引发的单粒子翻转的方法.利用这种方法计算了几种器件的翻转情况,与地面模拟实验及飞行观测结果符合得非常好.     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.     

基于复杂型面薄壁零件成形的电铸试验研究

 在航空、航天领域存在诸如风洞喷管、波导元件和叶片电极等异型薄壁零件,采用常规加工方法对这些薄壁零件进行加工时存在着难加工的问题,利用一种新型的电铸技术——阴极平动式游离粒子辅助磨擦电铸技术对其进行直接成形加工。在电铸过程中,阴阳极之间添加不导电的游离粒子,随着阴极的不断运动,游离粒子能够周期性地对电沉积层产生磨擦、抛光、挤压作用,以此来提高表面质量,强化电铸层。与传统电铸技术所制备的电铸镍层进行了对比试验,试验结果表明：游离粒子辅助磨擦电铸技术能够获得表面光亮、平整电铸层;电铸层（200）晶面的衍射强度明显降低,（111）和（220）晶面的衍射强度显著提高;电铸层的机械性能也得到了明显的改善,显微硬度和抗拉强度比传统电铸工艺提高了一倍左右。以此为基础,成功制备了复杂型面叶片阴极,其显微硬度和表面粗糙度都得到了明显改善。     

高能合成煤油GN-1性能研究 --“液体火箭推进”专刊

结合火箭发动机工程应用环境,研究了GN-1煤油高温高压热物性、安全特性、传热结焦性能以及点火延迟性能,并和现役火箭煤油作了对比分析。采用商业仪器对GN-1煤油在最高200℃、最高压力25MPa范围内的密度、黏度、定压比热容、导热系数、表面张力进行了实验测量。在实验数据的基础上,依据基团贡献法、基于比容平移法则的P-R方程、摩擦理论、广义对应态原理分别对GN-1煤油在最高350℃、最高压力60MPa范围内的密度、黏度、定压比热容、导热系数、表面张力进行了理论计算,建立了GN-1煤油的密度方程、黏度方程、导热系数方程,并将方程的计算值与实验值进行了对比,计算偏差较小。对GN-1煤油和火箭煤油的安全性能进行对比研究,GN-1煤油的闪点为40℃,自燃温度为305℃,高于火箭煤油(225℃);燃点为47℃,低于火箭煤油(82℃),GN-1煤油的爆炸极限范围为0.44%-2.9%（40℃）。GN-1煤油和火箭煤油的急性经口毒性LD50＞5000mg/kg,均属于第五级化合物（实际无毒）。在入口压力10 MPa,流速10 m·s-1,内壁温480℃条件下,GN-1煤油的传热系数比火箭煤油提高14.4%,建立了传热准则方程。GN-1煤油出口油温220℃时试验段平均结焦速率是出口油温150℃时的4.43倍,GN-1煤油不锈钢材质管路中试验段平均结焦为高合管材质管路中的22.3%。在970K-1105K温度范围内,GN-1煤油的点火延迟时间为320μs-471μs,是火箭煤油的55.6%-69.3%。相关研究可对发动机可靠设计及应用提供重要参考。     

激波与固体颗粒群相互作用实验研究

为了研究FAE武器、温压武器中燃料抛撒问题,在垂直激波管里进行了气-固两相流的实验研究。主要研究激波（Ma=1．96）与3种不同堆密度的石英砂颗粒群相互作用,用高速摄影仪对颗粒在抛撒过程进行图像捕捉,得到颗粒在抛撒阶段的速度。研究颗粒群在超声速气流下的运动规律以及激波对颗粒群加速的影响规律,分析激波通过颗粒群时气-固两相流中的动力学过程。定量分析颗粒堆密度对激波的影响,得出了固体颗粒群受到激波作用后抛撒过程中纵向和横向颗粒云团体积增加,颗粒云团平均浓度减少;颗粒群的堆密度与颗粒粒径、抛撒初速度、反射激波的强度都成反相关关系。     

Non-Thermal Processes in Cosmological Simulations

Non-thermal components are key ingredients for understanding clusters of galaxies. In the hierarchical model of structure formation, shocks and large-scale turbulence are unavoidable in the cluster formation processes. Understanding the amplification and evolution of the magnetic field in galaxy clusters is necessary for modelling both the heat transport and the dissipative processes in the hot intra-cluster plasma. The acceleration, transport and interactions of non-thermal energetic particles are essential for modelling the observed emissions. Therefore, the inclusion of the non-thermal components will be mandatory for simulating accurately the global dynamical processes in clusters. In this review, we summarise the results obtained with the simulations of the formation of galaxy clusters which address the issues of shocks, magnetic field, cosmic ray particles and turbulence.     

含硼富燃燃气燃烧实验研究

为实现固冲发动机二次燃烧模型验证,结合固冲发动机工作条件,设计了一种带透明观察窗燃烧实验装置;营造了简单的燃烧环境,实现了燃烧过程掺混作用的弱化;借助高速摄像进行了以空气速度作为单一变量的含硼富燃燃气燃烧可视化测量,获得了火焰形态结构;采用高速数据采集,获得了燃烧室压力;将实验数据与数值模拟结果进行了对比和分析。结果表明,燃气与空气速度相近时,火焰呈锥角结构,硼粒子的点火距离较长;燃气与空气速度差较小时,同一位置燃烧室压力较大;燃气与空气速度近似程度决定火焰的形态;数值模拟结果与实验结果基本吻合。     

宽粒径范围颗粒对气相膨胀的影响

利用双流体模型对固体火箭发动机喷管内气固两相流进行计算,研究了两相流中颗粒相与气相的相互作用,分析了颗粒粒径及颗粒质量分数对两相流中气相在喷管中膨胀的影响。结果表明,颗粒粒径造成两相流损失的大小是颗粒比表面积、气相湍流动能及颗粒在喷管内的滞留时间等因素共同作用的结果,两相流损失随着颗粒粒径的增大先增大、后减小,同时随着颗粒质量分数增大而增大;JPL喷管中粒径为2μm的颗粒造成的两相流损失最大,此粒径下,当颗粒质量分数从10％增大到40％时,两相流损失从10％增大到26％。     

计算模拟月壤颗粒吸收及散射特性的一种球叠加模型

针对模拟月壤复杂的外形特征以及多相非均质的微观结构,提出了一种计算模拟月壤颗粒吸收及散射特性的球叠加模型。根据模拟月壤颗粒的形状指数和分形特征识别结果,归纳了4种主要的模拟月壤颗粒类型,并采用蒙特卡罗光线跟踪法研究了这4种颗粒在单色平行光照射下的吸收及散射特性。与已有的非球形颗粒辐射特性的算法比较显示,该模型具有良好的计算准确性。在数值计算的基础上,分析了颗粒尺度参数及光学常数对其自身辐射特性的影响,并通过改变平行光照下的光线入射角度,分析了非球形颗粒的朝向对其自身辐射特性的影响。由计算结果推断,该模型不仅可以应用于计算模拟月壤颗粒的辐射特性,还可以满足其他适用于几何光学近似的非球形粒子。     

Coupling damage and reliability model of low-cycle fatigue and high energy impact based on the local stress–strain approach

Fatigue induced products generally bear fatigue loads accompanied by impact processes,which reduces their reliable life rapidly. This paper introduces a reliability assessment model based on a local stress–strain approach considering both low-cycle fatigue and high energy impact loads.Two coupling relationships between fatigue and impact are given with effects of an impact process on fatigue damage and effects of fatigue damage on impact performance. The analysis of the former modifies the fatigue parameters and the Manson–Coffin equation for fatigue life based on material theories. On the other hand, the latter proposes the coupling variables and the difference of fracture toughness caused by accumulative fatigue damage. To form an overall reliability model including both fatigue failure and impact failure, a competing risk model is developed. A case study of an actuator cylinder is given to validate this method.