混杂复合材料层合板抗冲击性能研究

为了探究复合材料层合板在实际应用中因承受冲击载荷而造成的结构安全问题,本研究采用实验和仿真相结合的方法,首先探究冲头形状对复合材料层合板损伤机理的影响,然后结合不同冲击能进一步揭示层合板的承载力和能量吸收变化规律。结果表明,相同冲击能下,层合板的损伤范围和承载力随着圆锥头、半球头、平头依次增加;相应的层合板的临界穿透能量随着圆锥头、半球头、平头依次增大;冲头形状和冲击能对层合板的吸能能力有较大的影响。     

航线维修中的NFF件处理对策

对未发现故障(NFF)件产生的原因进行了分析,结合航线维修工作特点,编制了NFF件处理逻辑图,提供了系统的NFF件解决方案;在对NFF件的可靠性管理过程中引入闭环控制方法,从航线维修和部件修理两个方面入手,给出了减少NFF件的方法,对消除由NFF件造成的飞机运行不良影响、降低维修费用、提高部件修理质量有积极作用.     

A model of the effects of heavy ion radiation on human tissue

In heavy ion radiotherapy and space travel humans are exposed to energetic heavy ions (C, Si, Fe and others). This type of irradiation often produces more severe biological effects per unit dose than more common X-rays. A new Monte Carlo model generates a physical space with the complex geometry of human tissue or a cell culture based model of tissue, which is affected by the passage of ionizing radiation. For irradiation, the model relies on a physical code for the ion track structure; for tissues, cellular maps are derived from two- or three-dimensional confocal microscopy images using image segmentation algorithm, which defines cells as pixilated volumes. The model is used to study tissue-specific statistics of direct ion hits and the remote ion action on cells. As an application of the technique, we considered the spatial pattern of apoptotic cells after heavy ion irradiation. The pattern of apoptosis is modeled as a stochastic process, which is defined by the action cross section taken from available experimental data. To characterize the degree of apoptosis, an autocorrelation function that describes the spatial correlation of apoptotic cells is introduced. The values of the autocorrelation function demonstrate the effect of the directionality of the radiation track on the spatial arrangements of inactivated cells in tissue. This effect is intrinsic only to high linear-energy-transfer radiation.     

Variable Structure Control of Catastrophic Course in Airdropping Heavy Cargo

The mathematical model of a transport aircraft would be subjected to a sudden change when heavy cargo is dropped off in airdropping, which exerts serious influences upon the safety of the aircraft. A variable structure controller is specially designed for handling the airdrop process. The nonlinear system is linearized by input-output feedback linearization using differential geometry theories. On this basis, an inner loop system for velocity and attitude tracking control is designed by using the exponentially approaching rule of the variable structure theory. The whole flight control system is integrated with the outer loop flight altitude control. Digital simulation evidences the applicability of the system to potentially catastrophic course in airdropping heavy cargo and provides robustness against system parameter perturbation.     

Induction of genomic instability after an acute whole-body exposure of mice to Fe ions

The purpose of this study was to evaluate dose–response relationships for the in vivo induction of micronuclei (MN) as a measure of both initial radiation damage and the induction of genomic instability. These measurements were made in mouse blood erythrocytes as a function of radiation dose, radiation quality, time after irradiation, and the genetic background of exposed individuals. Blood samples were collected from two strains of mouse (CBA/CaJ and C57BL/6J) at different times up to 3 months following a whole-body exposure to various doses of 1 GeV/amu ⁵⁶Fe ions (0, 0.1, 0.5 and 1.0 Gy, at the dose rate of a 1 Gy/min) or ¹³⁷Cs gamma rays (0, 0.5, 1.0 and 3.0 Gy, at the dose rate of 0.72 Gy/min). Blood-smear slides were stained with acridine orange (AO). The frequencies of MN were measured in mature normochromatic-erythrocytes (MN-NCEs) and in immature polychromatic-erythrocytes (MN-PCEs). Effects of both types of radiation on erythropoiesis were also evaluated. As a measure of cell progression delay, a dose-dependent decrease in numbers of PCEs was observed at day 2 post-exposure in both strains, regardless of radiation quality. Subsequently, the levels of PCEs increased in all exposed mice, reaching control levels (or higher) by day 7 post-exposure. Further, at day 2 after the exposure, there was no increase in the frequency of MN-PCEs in CBA/CaJ mice exposed to ⁵⁶Fe ions while the frequency of MN-PCEs elevated as a function of dose in the C57BL/6J mice. At day 4, there was no dose related increase in MN-NCEs in either strain of mouse exposed to ¹³⁷Cs gamma rays. Additionally, at the early sacrifice times (days 2 and 4), ⁵⁶Fe ions were slightly more effective (per unit dose) in inducing MN-NCEs than ¹³⁷Cs gamma rays in CBA/CaJ mice. However, there was no increase in the frequency of MN-NCEs at late times after an acute exposure to either type of radiation. In contrast, both types of radiation induced increased MN-PCEs frequencies in irradiated CBA/CaJ mice, but not C57BL/6J mice, at late times post-exposure. This finding indicates the potential induction of genomic instability in hematopoietic cells of CBA/CaJ mice by both types of radiation. The finding also demonstrates the influence of genetic background on radiation-induced genomic instability in vivo.     

CU-1型钇基重稀土对Be-Cu合金性能影响的研究

研究了CU-1型钇基重稀土对Be-Cu合金性能的影响。结果表明:Be-Cu合金经过微量CU-1型稀土的微合金化处理后,其显微硬度、耐磨性和耐腐蚀性均有不同程度的提高,热膨胀系数有所下降;随着稀土加入量的增加,Be-Cu合金的显微硬度逐渐提高,磨损量和平均腐蚀速率逐渐降低,热膨胀系数先减小后增大。     

空间重粒子击中卤虫卵的定位技术及其生物效应

为了能够估价空间重粒子对单个生物细胞的放射生物学效应,我们设计、制成了卤虫卵-核乳胶夹层式生物包.经搭载我国“8885”卫星飞行数天后回收.用图象分析仪研究了空间重离子在核乳胶上留下的径迹及其分布;并实验观察了卤虫卵的前期发育情况.看到:随星飞行过的卤虫卵与地面对照组相比,其发育能力明显降低,表现为孵化率低且发育时间推迟.实验表明:生物样品板-核乳胶影象定位技术能清楚而比较准确地给出卤虫卵(或其他生物细胞)受重离子作用的信息,是重离子生物效应及其作用机理研究的可行实验手段及分析方法之一.     

重庆都市经济圈土壤Cd元素含量分布特征与评价

通过重庆都市经济圈网格化深浅层土壤及评价样品的调查分析,阐述重金属Cd区域上的分布现状,并绘制土壤Cd元素环境质量分级图.研究区浅层土壤Cd背景平均值0.27μg/g,深层0.13μg/g.根据《土壤环境质量标准》对区内土壤进行统计分类,区内浅层土壤Cd元素Ⅱ类土及以上土类面积为83.97%.土壤Cd高含量值主要分布在金刀峡镇北、含谷—白市驿、木耳—王家和玉峰山镇等区域.含谷—白市驿、木耳—王家、西彭北等区域的高Cd含量受人类活动影响比较明显,其中含谷—白市驿区Cd主要来源于生活垃圾、排污底泥和降尘,而金刀峡镇北的高Cd含量属自然背景变化的范畴.     

偶发组播数据丢包问题研究

针对传输关键控制数据的某型冗余备份网络架构在大背景流量下偶发组播数据丢包的问题,分析了丢包机理,提出配置静态组播组的方法,同时进行了实验验证。结果表明,该方法能有效解决工程实践中出现的问题。因此,在网络结构设计时,要充分考虑传输链路中会对组播传输产生洪泛的设备,采取有效措施消除影响,确保组播数据传输的正确性与完整性。     

关于发展起重用重型直升机的一些想法

本文介绍了目前世界上重型直升机的现状以及主要国家的重型直升机发展计划,讨论了现有这些计划的不足之处。作者提出了一种低成本、快速发展起重用重型直升机的方法。本文对该方法的优点,关键技术以及可行性都作了探讨。