时序信号设计的一种新方法

文章结合高速时序工作的特点,从实现的角度提出了一种利用软件调整时序的新方法。在可编程逻辑器件中,利用数字时钟管理器(DCM),通过模块化和增量式设计思想达到对高速时序信号的精确调节。最终实现了一个20MHz速率的时序控制,调节精度达到100ps。     

Laser-induced oxidation assisted micro milling of high aspect ratio microgroove on WC-Co cemented carbide

Severe tool wear and poor surface quality are the main problems during micro machining of cemented carbide. In this work, an innovative hybrid process of laser-induced oxidation assisted micro milling (LOMM) was proposed to solve the problems. A nanosecond laser was utilized to induce oxidation of the WC-20%Co material, producing loose oxide which was easy to remove. The micro machinability of the material was improved by laser-induced oxidation. The oxidation mechanisms of cemented carbide were studied. A microgroove with a depth of 2.5 mm and aspect ratio of 5 was fabricated successfully. The milling force, surface quality and tool wear mechanisms were investigated. For comparison, a microgroove was also fabricated with conventional micro milling (COMM) using identical milling parameters. Results revealed that in LOMM the milling force and tool wear rate were extremely low during removing the oxide. The machined surface quality and dimensional accuracy achieved by LOMM were superior to those obtained by COMM. The surface roughness S_a of the microgroove bottom reached 88 nm in LOMM, while the cross-sectional geometry of the microgroove was a trapezoid. Perpendicularity of the microgroove sidewall machined by LOMM was better than that by COMM. The tool wear forms in LOMM were coating spalling and slight tool nose breakage. Compared with COMM, the tool life in LOMM was prolonged significantly. It indicates that the proposed hybrid process is an effective and efficient way to fabricate high aspect ratio micro-features with high dimensional accuracy.     

高值电阻国际比对的方法研究

介绍了参加亚太实验室认可合作组织(APLAC)开展的高阻1 MΩ;10 MΩ实验间比对的方法,对一种用参考电压测量高阻的方法进行了描述,解决了其中的技术问题,对测量不确定度进行了分析,其结果为测量1MΩ的合成标准不确定度为3.10-6,测量10 MΩ的合成标准不确定度为5.10-6,APLAC公布的比对中期报告证明了该方法的可靠性。     

广播电视卫星高精度时间传递

介绍一种利用我国广播电视卫星进行高精度时间传递的方案,建立多个卫星电视时间发播系统,利用广播电视卫星进行双向时间比对,实现远距离卫星地面站之间的时间同步。通过测量地面站到卫星之间的距离,可实时计算出卫星的坐标位置,用户根据接收到的时间及卫星位置信息,实施高精度定时。     

Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.     

自由返回轨道的P平面参数快速设计方法

针对自由返回轨道求解过程中地心轨道类型变化造成的B平面参数方法计算失败问题,提出一种基于P平面参数的自由返回轨道快速设计方法。首先,基于轨道半通径参数的普适性,给出了不同轨道类型的P平面参数定义,建立了以P平面参数为求解目标量的自由返回轨道求解模型。其次,给出了基于P平面参数的自由返回轨道快速设计方法,在构建的瞬时地月惯性系下,以平面双二体自由返回轨道作为初值,实现了高精度力模型下的自由返回轨道快速求解。对8种构型自由返回轨道的设计结果表明,P平面参数具有类似于B平面参数的大收敛域,且有效解决了轨道类型变化对计算的影响,可直接应用于中国后续月球探测任务轨道设计。     

飞行控制技术面临的挑战与发展

总结了飞行器的发展趋势,明确了飞行控制领域的前沿问题与挑战,概括了飞行控制技术的基础问题和关键技术,分析了现阶段飞行控制技术研究进展,对未来飞行控制技术的发展提出了建议与思考。     

碳/环氧复合材料钻孔刀具磨损机理研究

对高速钻削碳／环氧复合材料的刀具磨损特性、刀具磨损对钻削力的影响等进行了研究。结果表明：钻削彬环氧复合材料时，刀具磨损的原因主要是磨粒磨损（或质点磨损），随着刀具磨损的加剧，轴向力持续增加，扭矩的增加逐渐趋于平缓，因此控制刀具磨损是减小轴向力最有效的手段之一。     

用ACP提高硝胺改性双基推进剂的燃速

通过添加快燃物ACP来提高硝胺改性双基推进剂的燃速，得到了ACP影响推进剂燃速的一般规律：推进剂的燃速随ACP的含量和粒度的增大而增大。运用热分析、扫描电镜、燃烧火焰单幅照相、燃烧波温度分布等分析和测试手段来研究含ACP的硝胺改性双基推进剂的燃烧过程，揭示了ACP提高推进剂燃速的机理：ACP的快速燃烧，使得推进剂燃面增大和传热量增加，导致推进剂燃速增加。     

New design simulation for a high-altitude dual-balloon system to extend lifetime and improve floating performance

This paper presents a comprehensive simulation for a high-altitude dual-balloon system which consists of zero- and super-pressure balloons. Preliminary calculations were established to describe the basic concept of the new integrated system. A mathematical model was investigated to simulate the ascending and floating processes which considered the atmospheric conditions and thermodynamic variations. Based on the simulation, results showed that the floating altitude stability between daytime and nighttime was improved. This integrated system supports higher floating altitude levels than those of ordinary balloons and extends the lifetime of floating balloon systems. Moreover, results demonstrated that the integrated system was lighter than ordinary balloons, saving useful weight for effective payload. Furthermore, exploiting the advantages of both kinds of balloons while avoiding the difficulties was a significant goal in the current design to promote the floating performance of high-altitude balloons technology.