面向全月球探测的天基中继测控系统设计

中继测控是月球探测任务中必须解决的关键问题，特别是月球背面和两极地区的着陆和巡视探测任务以及载人登月任务。本文首先对国内外月球中继测控卫星的研究和发展情况进行了调研，分析了未来全月球探测对中继测控的需求。在此基础上，重点给出了面向全月球探测任务的天基中继测控系统设计方案，并仿真分析了该方案的中继测控性能。最后给出了简要的卫星设计方案。     

基于任务的作战飞机效能评估模型

针对作战飞机的任务效能评估问题,提出了基于作战飞机任务的任务效能新概念;采用概率分析方法将飞机作战过程分解并抽象为一组概率值,建立了相应的任务效能评估模型;该模型可以在兼顾传统仿真评估模型结果精度的同时,具有模型简明、计算消耗低、方便快捷等特点;更具有实际作战指挥意义,其快速可信的评估结果有利于作战指挥官进行合理的、科学的任务规划,从而有利于在执行特定任务时更好地运用现有的作战飞机和武器;算例结果表明该模型可以较为有效地对作战飞机携带不同机载武器时在不同作战环境中打击不同作战目标进行效能评估.     

深空探测航天器巡航段自主导航方法研究

对深空探测航天器自主导航方法进行了研究。为了应对深空探测中航天器轨道动力学模型的误差，在分光计测量航天器相对于太阳径向速度基础上，引入了小行星的视线矢量测量。通过最小二乘法计算出由小行星视线矢量所得到的位置信息，采用改进的信息融合方法修正扩展卡尔曼滤波中不精确的动力学模型造成的状态估计误差。同时计算了模型的能观度，对模型的可观性进行了分析。最后对算法进行了仿真分析，仿真结果表明，该算法对动力学模型的依赖性明显低于其他算法，在相同模型精度下，可获得更好的滤波精度。     

A multiple-rendezvous,sample-return mission to two near-Earth asteroids

We propose a dual-rendezvous mission, targeting near-Earth asteroids, including sample-return. The mission, Asteroid Sampling Mission (ASM), consists of two parts: (i) flyby and remote sensing of a Q-type asteroid, and (ii) sampling of a V-type asteroid. The targeted undifferentiated Q-type are found mainly in the near-Earth space, and to this date have not been the target of a space mission. We have chosen, for our sampling target, an asteroid from the basaltic class (V-type), as asteroids in this class exhibit spectral signatures that resemble those of the well-studied Howardite–Eucrite–Diogenite (HED) meteorite suite. With this mission, we expect to answer specific questions about the links between differentiated meteorites and asteroids, as well as gain further insight into the broader issues of early Solar System (SS) evolution and the formation of terrestrial planets. To achieve the mission, we designed a spacecraft with a dry mass of less than 3 tonnes that uses electric propulsion with a solar-electric power supply of 15 kW at 1 Astronomical Unit (AU). The mission includes a series of remote sensing instruments, envisages landing of the whole spacecraft on the sampling target, and employs an innovative sampling mechanism. Launch is foreseen to occur in 2018, as the designed timetable, and the mission would last about 10 years, bringing back a 150 g subsurface sample within a small re-entry capsule. This paper is a work presented at the 2008 Summer School Alpbach,“Sample return from the Moon, asteroids and comets” organized by the Aeronautics and Space Agency of the Austrian Research Promotion Agency. It is co-sponsored by ESA and the national space authorities of its Member and Co-operating States, with the support of the International Space Science Institute and Austrospace.     

MEMORIS: a wide angle camera for the BepiColombo mission

MEMORIS (MErcury Moderate Resolution Imaging System) is a wide angle camera (WAC) concept for the ESA mission BepiColombo. The main scientific objectives consist of observing the whole surface of Mercury in the spectral range of 400–1000 nm, with a spatial resolution of 50 m per pixel at peri-Herm (400 km) and 190 m at apo-Herm (1500 km). It will obtain a map of Mercury in stereo mode allowing the determination of a digital elevation model with a panchromatic filter through two different channels. The camera will also perform multispectral imaging of the surface with a set of 8–12 different broad band filters. A third channel dedicated to limb observations will provide images of the atmosphere. MEMORIS will thus monitor the surface and the atmosphere during the entire mission, providing a unique opportunity to study the relationship between surface regions and the atmosphere, as suggested by ground-based observations and theory.     

精确绘制半径样板检测放大图的方法

通过直角坐标系的平移、旋转确定圆弧上点的方法,提出了在万能工具显微镜上利用其有限工作行程,精确绘制半径样板圆弧检测放大图的方法。     

XY502胶粘剂最佳制样的选择与探讨

XY502胶粘剂的测试结果始终处于不稳定状态，通过大量的对比试验与研究，确定出XY502胶粘剂的最佳制样方法：混合甲乙组份2小时，打磨方式达到标准要求，同时在房间里配除湿机来把湿度固定在45％-55％范围内，胶接及停放温度对结果影响很大，必须把胶接及停放温度控制在25℃-30℃之间，这样XY502的测试结果才符合标准，以上方法才是最佳的制样方法。     

载人航天任务测速雷达双通道数据融合方法

针对载人航天任务中高精度测速雷达在实时多主站外弹道融合时仅能采用单通道应答数据参与处理,获得的弹道精度较差,且测速雷达数据利用率仅有50%的问题,提出利用多普勒效应和应答机遥测参数两种方法对测速雷达跟踪模式进行实时准确识别,首先得到测速雷达双通道的应答数据,然后通过改进的非线性滤波+机动模型算法对火箭上升段外弹道测量数据进行高精度融合。最后采用仿真数据对传统方法和新方法的外弹道融合精度进行了比对分析。该方法的应用可有效提高测速雷达测元利用率和载人航天任务火箭上升段外弹道精度,具有较强的工程应用价值。     

大型水陆两栖飞机特殊任务模式对总体设计的挑战

面向森林灭火和水上救援任务设计的大型水陆两栖飞机，由于其特殊的任务模式，给设计工作带来了许多全新的挑战。首先，分析了国内森林灭火和水上救援的需求，并介绍了对应的任务模式。然后，总结了在型号研制过程中不同于常规飞机的特殊设计和相应的解决方法，具体包括：以国内供应商为主体的构型管理体系的建立、气水动一体化设计、全新的起落架布局设计、任务系统集成和效能评估、驾驶舱集成设计、设备布置和腐蚀防护设计。最后，提出了在适航审定和集成应用方面仍需重点关注的4个研究方向。     

Role of sample return and sample science in low cost missions

Sample return is an essential component of solar system exploration. Samples provide a unique data set that is critical for understanding formation and evolution of our solar system. This uniqueness is based on the scale of observations, precision of measurements, the ability to modify experiments as logic and technology dictate, and the ability to use instruments free of the constraints on mass, power, reliability, and data rate of flight instruments. Advances in analytical capabilities in recent years enable fundamental measurements to be made on extremely small samples, greatly reducing mass constraints on robotic sample return spacecraft. Sample studies provide irreplaceable ground truth for remotely-sensed data on planetary surfaces and fit within a variety of architectures for human exploration of the solar system.