三维矩形板1/4椭圆角裂纹的通用权函数

对三维矩形板1/4椭圆角裂纹的通用权函数进行了研究.基于有限元方法计算了裂纹面承受沿宽度方向的均布、线性分布和2次分布应力时的参考应力强度因子解,建立了形式较为统一、较高精度以及适用范围相对更宽的参考应力强度因子近似表达式.在此基础上获得了三维矩形板1/4椭圆角裂纹的通用权函数,最后采用裂纹面分别承受3次、5次和7次幂函数分布应力下的应力强度因子有限元解对通用权函数的计算精度进行了检验和验证.结果表明:建立的通用权函数相比已有的通用权函数精度由4%(A点)和6%(B点)提高到1.06%(A点)和1.6%(B点),补充验证的7次幂函数分布载荷下的应力强度因子通用权函数解的精度达到3.67%(A点)7.45%(B点).      

远场假设对喷流噪声预测中格林函数求解的影响

目前基于雷诺平均Navier-Stokes（RANS）的喷流噪声预测方法在格林函数求解时, 为简化求解过程,通常对喷流流动做平行流假设, 对观测点做远场假设。随着格林函数求解方法发展,近年来的研究表明平行流假设对下游观测点格林函数的计算会引起较大偏差,而目前远场假设对格林函数求解的影响仍不清楚。为研究远场假设对喷流格林函数求解的影响,以二维喷流为例, 采用计算气动声学方法（CAA）分别数值求解了观测点远场假设条件与实际条件下90°~150°方向喷流内伴随格林函数,进而分析远场假设对格林函数求解的影响。研究结果表明,对于不同方向的观测点,由观测远场假设导致的伴随格林函数求解偏差不尽相同,且对于越靠近喷流中心线方向的观测点,远场假设导致的偏差越大,其中150°方向观测点,采用远场假设后,格林函数计算结果最大偏差达到-15 dB以上。因此,对于靠近喷流中心线方向的噪声观测点而言,为避免预测偏差,应采用实际观测条件求解喷流格林函数。     

基于变精度遗传算法的翼型快速优化设计方法

低碳环保的电动飞机在要求较高升阻比的同时,需要尽量降低成本、缩短研制周期。但高精度的数值模拟时间代价很大,因此针对电动飞机翼型设计中初始翼型较难选取、优化速度较慢的问题,提出了一种基于变精度遗传算法的翼型多点快速优化方法。以常用的 Hicks-Henne 型函数为基础,改进了其对翼型后缘描述不精确的问题。在数值模拟阶段,介绍了一种快速气动参数计算软件XFOIL,并分析了该软件的适用性与局限。之后给出了使用XFOIL 与 Matlab 进行联合求解的方法,在无人干预的情况下完全实现了翼型设计与优化的自动化,提高了设计效率。在翼型优化阶段,为保持较高的精度和寻优效率,设计了翼型参数的实数编码方法。针对传统遗传优化算法了改进,设计了染色体变精度杂交方法以及动态惩罚方法。最后,给出了基于遗传算法的多点优化方案,以及翼型多目标快速优化一体化设计方案。仿真分成两部分进行,首先改进的 Hicks-Henne 型函数能够有效实现参数化翼型的后缘夹角改变。通过与 NSGA-II 方法的优化结果对比,本文的方法在一定迭代次数范围内获得的升阻比更高,失速特性更加缓和,特别是在综合提高翼型优化效率方面表现较好。仿真结果表明,该方法能够快速获得多种工况下具有较高升阻比的翼型,也可以作为进一步优化的初始翼型,能提高翼型优化效率。     

Systematic centroid error compensation for the simple Gaussian PSF in an electronic star map simulator

Simulated star maps serve as convenient inputs for the test of a star sensor, whose standardability mostly depends on the centroid precision of the simulated star image, so it is necessary to accomplish systematic error compensation for the simple Gaussian PSF（or SPSF, in which PSF denotes point spread function）. Firstly, the error mechanism of the SPSF is described, the reason of centroid deviations of the simulated star images based on SPSF lies in the unreasonable sampling positions（the centers of the covered pixels） of the Gaussian probability density function. Then in reference to the IPSF simulated star image spots regarded as ideal ones, and by means of normalization and numerical fitting, the pixel center offset function expressions are got, so the systematic centroid error compensation can be executed simply by substituting the pixel central position with the offset position in the SPSF. Finally, the centroid precision tests are conducted for the three big error cases of Gaussian radius r = 0.5, 0.6, 0.671 pixel, and the centroid accuracy with the compensated SPSF（when r = 0.5） is improved to 2.83 times that of the primitive SPSF, reaching a 0.008 pixel error, an equivalent level of the IPSF. Besides its simplicity, the compensated SPSF further increases both the shape similarity and the centroid precision of simulated star images, which helps to improve the image quality and the standardability of the outputs of an electronic star map simulator（ESS）.     

Fuzzy adaptive tracking control within the full envelope for an unmanned aerial vehicle

Motivated by the autopilot of an unmanned aerial vehicle（UAV） with a wide flight envelope span experiencing large parametric variations in the presence of uncertainties, a fuzzy adaptive tracking controller（FATC） is proposed. The controller consists of a fuzzy baseline controller and an adaptive increment, and the main highlight is that the fuzzy baseline controller and adaptation laws are both based on the fuzzy multiple Lyapunov function approach, which helps to reduce the conservatism for the large envelope and guarantees satisfactory tracking performances with strong robustness simultaneously within the whole envelope. The constraint condition of the fuzzy baseline controller is provided in the form of linear matrix inequality（LMI）, and it specifies the satisfactory tracking performances in the absence of uncertainties. The adaptive increment ensures the uniformly ultimately bounded（UUB） predication errors to recover satisfactory responses in the presence of uncertainties. Simulation results show that the proposed controller helps to achieve high-accuracy tracking of airspeed and altitude desirable commands with strong robustness to uncertainties throughout the entire flight envelope.     

A seventh-order model for dynamic response of an electro-hydraulic servo valve

In this paper, taking two degrees of freedom on the armature–flapper assembly into account, a seventh-order model is deduced and proposed for the dynamic response of a two-stage electro-hydraulic servo valve from nonlinear equations. These deductions are based on fundamental laws of electromagnetism, fluid, and general mechanics. The coefficients of the proposed seventhorder model are derived in terms of servo valve physical parameters and fluid properties explicitly.For validating the results of the proposed model, an AMESim simulation model based on physical laws and the existing low-order models validated by other researchers through experiments are used to compare with the seventh-order model. The results show that the seventh-order model can reflect the physical behavior of the servo valve more explicitly than the existing low-order models and it could provide guidance more easily for a linear control design approach and sensitivity analysis than the AMESim simulation model.     

率相关HTPB推进剂/衬层界面Ⅱ型内聚力模型

采用实验与反演相结合的方法构建了端羟基聚丁二烯(HTPB)推进剂/衬层界面的率相关的内聚力模型.采用改进的单搭接试件完成了HTPB推进剂/衬层界面的断裂实验研究,采用内聚力单元方法对单搭接试件进行了数值研究,结合基于Hook-Jeeves优化算法的反演识别程序,获取了不同加载率下的界面断裂参数.由于界面断裂参数具有明显的率相关性,通过构建率相关的损伤函数,构建了基于双线性内聚力模型的率相关HTPB推进剂/衬层界面Ⅱ型内聚力模型.模型预测结果和实验结果的对比相关系数大于99%,说明本文所建立的 率相关内聚力模型具有较高的准确性,能够准确描述加载率为5~200mm/min时推进剂/衬层界面的断裂性质.      

SVM在气体减压器稳定性能中的应用

使用支持向量机(SVM)研究涡轮气封减压试验系统中高压卸荷膜片式减压器的稳定性问题,主要集中于以往方法不易涉及的多结构参数变化.针对稀疏易有残缺的小样本空间,与BP(back propagation)神经网络模型进行对比,得出SVM方法在所研究数据集上的一些结论:SVM模型预测性能在多结构参数变化情形下优于BP神经网络模型,预测误差平均降低了25.5%;SVM的泛化性好于BP;在双参数、三参数情形下,SVM模型为气体减压器的设计提供了更好的决策支持,给出了优化结构参数的设计建议.      

欠频响压力探针测量压气机动态流场的结果分析

压气机内部流动具有很强的非定常特征,尤其是小尺寸发动机叶片通过频率高达30～80 kHz,而动态压力探针的响应频率只能与叶片通过频率相当,采用其测量不易获得具体的高频流场结构.为了研究这种欠频响情况下测得流场与真实流场的差异,以某低速压气机为对象进行了模拟研究.采用频响为420 Hz的动态压力探针及频响大干33 kHz的单斜丝热线探针,测量了叶片通过频率为303 Hz的转子出口流场.修正了动态压力探针的容腔效应对测得流场的影响,校验了在测试系统响应频率较低时,修正后流场与热线测得的参考流场之间的差异.对比结果表明:原始流场压力信号的部分频率成分产生了较大偏差,出口截面流场的周向位置有较大误差.经修正后,周向位置较为准确,泄漏堵塞区域形态以及强度都与参考流场的更为接近,但由于尾迹区存在部分高频,修正后结果与参考流场的差异仍较明显.     

民用飞机生产体系需求定义过程研究

建立高效灵活的民用飞机生产体系是民机项目研制成功的重中之重,也是民机制造商面对变化多端的民机市场必须解决的关键所在。民机产品的复杂性与多样性,决定了民机生产体系的复杂性与多样性。借助系统工程方法探索以需求为牵引对生产体系开展正向设计的方法,在充分研究民机产品与生产体系关系的前提下,借鉴目前广泛用于飞机产品需求定义的思路,本文对生产体系需求定义过程进行了研究,提出了利益攸关方模型和基础功能模型,将风险分析引入生产需求定义过程以提升目标系统的安全性,描述了从利益攸关方需要到需求和从风险应对需要到需求这两类需求捕获方法,提供了生产体系需求的分类方式并阐述了分类的目的,给出的典型生产体系需求来源可作为相关实践的模板。