深空探测中多普勒的建模与应用

针对深空探测中的多普勒观测资料的单程和三程模式,分别给出了瞬时和积分的观测模型,双程多普勒观测模型是三程模式的一个特殊情况.通过比较瞬时和积分多普勒的差异,推断在积分周期取得足够小时,瞬时观测模型与积分模型是一致的.利用2009年8月份对火星探测器MEX的三程多普勒测轨资料的处理,检验了三程多普勒资料观测模型的正确性,利用约一个圈次8小时三程多普勒数据进行轨道计算,定轨结果与欧空局重建轨道位置差约几百米.     

偏置动量卫星东西位置保持策略优化方法

针对偏王动量卫星的特点,提出了一种偏置动量卫星东西位置保持策略优化方法.根据单自由度轮控系统的控制方式、角动量管理的控制方法,以及角动量管理对卫星轨道的影响,基于动量轮转速的变化建立了推力器喷气效率、轨道元素变化量计算模型,提出了可延长东西位置保持周期的轨道控制优化策略.实际轨控任务应用结果表明方法控制效果良好.     

在轨服务的相对运动耦合动力学建模与分析

研究在轨服务航天器逼近与捕获目标航天器的相对轨道姿态耦合动力学建模问题。考虑航天器姿态与对接位置的运动耦合,建立目标运行在任意轨道下的相对轨道姿态耦合动力学模型,并对模型中的运动耦合进行深入分析。设计一种非线性的输出反馈姿态控制律,将建立耦合动力学模型与CW方程进行仿真比较,验证轨道与姿态的运动耦合对两航天器对接点之间相对位置的运动影响。     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

The possibilities of polar meteorology,environmental remote sensing,communications and space weather applications from Artificial Lagrange Orbit

The ability to observe meteorological events in the polar regions of the Earth from satellite celebrated an anniversary, with the launch of TIROS-I in a pseudo-polar orbit on 1 April 1960. Yet, after 50 years, polar orbiting satellites are still the best view of the polar regions of the Earth. The luxuries of geostationary satellite orbit including rapid scan operations, feature tracking, and atmospheric motion vectors (or cloud drift winds), are enjoyed only by the middle and tropical latitudes or perhaps only cover the deep polar regions in the case of satellite derived winds from polar orbit. The prospect of a solar sailing satellite system in an Artificial Lagrange Orbit (ALO, also known as “pole sitters”) offers the opportunity for polar environmental remote sensing, communications, forecasting and space weather monitoring. While there are other orbital possibilities to achieve this goal, an ALO satellite system offers one of the best analogs to the geostationary satellite system for routine polar latitude observations.     

小推力航天器的地月低能转移轨道

 在限制性四体模型下研究基于小推力方式的地月低能转移问题,通过借助于平动点轨道的相空间结构来揭示小推力转移的机理。重点研究了小推力转移自由飞行段的构造：经由LL₁点穿越获得最小能量的低能转移;而经由LL₁点Halo轨道穿越,得到(M,N)圈穿越轨道;由于Halo轨道相对于平动点增加了一维度的选择,根据(2,2)圈穿越轨道构造该转移的自由飞行段。在地球势阱逃逸和月球势阱捕获段,分别设计了合适的小推力的控制律及发动机开/关机时间,成功实施近地球段的小推力加速和近月球段的减速。尽管未对所得到的结果进行优化,所得转移轨道的燃料消耗也与类似边界条件的SMART-1轨道基本一致。     

The effect of neglecting VLBI reference station clock offsets on UT1 estimates

Very Long Baseline Interferometry (VLBI) allows to monitor universal time (UT1) by conducting regular international experiments. Such dedicated observation networks are equipped with different hardware components, which require different processing strategies when the data are correlated. As the timing units at each stations are usually offset with respect to universal time (UTC) this effect should be considered during correlation processing. Thus, it is investigated how neglecting of these offsets theoretically impacts the estimation of UT1. Three different strategies for the proper handling of the timing offset will be discussed and their advantages/drawbacks will be pointed out. Moreover, it is studied how neglecting of these timing offsets affects UT1 time-series and how such a missing correction can be applied a posteriori. Although the discussed effect is for most of the UT1 experiments smaller than the formal error of the estimates, it is important to consider station clock offsets properly in next-generation VLBI systems, which are expected to improve accuracy of results by about one order of magnitude.     

基于逐步回归的模型误差估计及在天基测控系统中的应用研究

以双星定位系统的天基测控技术为应用背景,提出了一种能够自适应估计模 型误差的轨道确定方法。详细推导了观测模型中的系统误差形态,建立了能表征实际特征的 部分线性轨道改进模型,并利用二阶段法和核函数估计法对混合误差进行补偿,在此基础上 对补偿模型进行逐步回归分析,从中提取动力学模型误差,从而抑制了动力学模型误差的影 响,提高了轨道改进的精度。在本文的仿真环境下,部分线性轨道改进法能够有效抑制混合 误差对定轨精度的影响,提高天基测控的轨道确定精度。     

Sumbandilasat—An operational technology demonstrator

Technology advances in sensor, digital technology and a standardised modular satellite bus are enabling a new generation of 80 kg micro-satellites with a better than 6.5 m GSD multi-spectral performance, to be specified, built and deployed with a dedicated launch within 12 months. The result of the standardised modular bus is lower cost, higher reliability and fast deployment. Operational remote sensing with a micro-satellite is thus within reach of individual organisations for dedicated missions. Sumbandilasat (pioneer in the Venda language) is a second generation satellite technology building on the expertise obtained in the Sunsat small satellite programme. The components used to build Sumbandilasat are the result of a technology development program of more than 3 years. Sumbandilasat is an operational technology demonstrator with more than 90% newly developed or improved subsystems and a compact refractive imager as a precursor to the MSMISat satellite with the same multi-spectral band set. The scalable, standardised modular satellite bus architecture enables satellites with a mass of 80–450 kg to be adapted to the specific mission requirements with minimum new engineering effort.     

利用星间测距的轨道计算方法

基于天基空间监测的技术背景,根据单位矢量法的基本原理,给出了一种在已知目标卫星轨道面的前提下仅利用星间测距对目标卫星进行轨道计算的算法,并对已知轨道面的不同误差大小对定轨精度的影响进行了分析。模拟计算表明,轨道倾角的误差对定轨的精度影响更大。