单晶合金蠕变性能影响因素分析

通过分析热处理工艺、元素含量、晶体取向性以及温度和应力对蠕变性能的影响,得出任何1种影响合金蠕变性能的因素其实质都是改变了合金的微观组织,并最终反映到γ′筏形的完善程度S、终端密度TD和线性密度LD上。S值越接近1,γ′筏形的完善程度越好,蠕变寿命就越长;而TD和LD值越大,微观组织图内筏形交叉和中断的数目就越多,蠕变寿命就越短。     

基体含量对复合材料结构稳定性的影响

基体含量影响着复合材料结构的性能,针对复合材料结构的稳定性设计,基于复合材料细观力学以及经典层合理论,分析复合材料层合板中的基体含量对于其材料性能,尤其是稳定性的影响.通过计算得出:随着基体含量的增加,材料的性能略有下降,但是由于基体含量增大而导致的单层板厚度增加,使得层合板的稳定性大幅提高.因此,在复合材料结构的稳定性设计中,应该考虑基体含量的影响.     

Lithium Abundance in Pop.II Stars A post-HIPPARCOS discussion

The relation between the lithium abundance observed in Population II stars and the primordial abundance, is still an open question (see Cayrel and Duncan, this meeting). A few recent results are discussed. HIPPARCOS data show that the standard model of stellar evolution can explain the 6Li detection in HD 84937, suggesting a negligible depletion of 7Li. A slope in the Li/Teff relation for Pop II dwarfs and a spread of their Li abundance have been advocated, and both used as arguments in favor of Li depletion. The slope is not confirmed when two other independent temperature scales are used. The Li scatter around the plateau is hardly larger than the scatter predicted from determination errors. Hints from a scatter of Li in subgiants of the globular cluster M92 are not completely conclusive. The determination of more accurate Li abundances in the Pop II stars is an urgent but difficult task, requiring better model atmosphere (better convection treatment) and the help of observational data about Pop II stars (such as long base interferometry).     

微机测控系统输入输出接口智能故障诊断

介绍了用于对微机测控系统输入接口板、输出接口板测试硬件系统的构成,设计了接口卡电路.针对两块电路板,提出了对数字电路板的测试和故障诊断分四个层次,即整板级、功能模块级、单片级和功能输出点级的思想,采取了对功能输出点进行编码的方法建立数字电路板测试的标准知识库,提出了使用功能标志矩阵的方法对各个层次的测试结果进行存储的方法,并根据各个层次测试的关系及相应功能标志矩阵的关系建立了智能化故障诊断程序.     

喷管流场和羽流场的N－S数值模拟

利用时间推进的方法，通过求解可压缩的、雷诺平均的Ｎ－Ｓ方程，并利用Ｂａｌｄｗｉｎ－Ｌｏｍａｘ两层代数滴流模型和Ｐｒａｎｄｔｌ混合长度模型，数值模拟了飞机和火箭发动机喷管的内流和羽流，获得了喷管内流场和羽流场的参数分布，计算结果与试验结果及国外研究成果一致。网格划分采和了自适应网格技术。     

Effects of the Fabrication Processes of NC-Si:H Films on Their Mechanical Properties

Studies of nanoindentation were performed on nc-Si:H films to evaluate the effects of the fabrication processes on their mechani-cal properties. It is observed that with the decrease of the SiH4 contents, the grain size of the films increases gradually, and as does the crystalline volume fraction. The smaller the grains become, the more homogeneous the films, and the more even the hardness as well as the modulus will be. The hardness and the modulus will increase with the substrate’s temperature rising. The hardness and the modulus of the nc-Si:H films on the Si substrate prove to be higher than those on the glass substrate given the same technology parameters. How-ever, the films on the glass substrate appear to be more homogeneous.     

Dynamics of Coronal Loop Oscillations Recent Improvements and Computational Aspects

We will discuss the observed, heavily damped transversal oscillations of coronal loops. These oscillations are often modeled as transversal kink oscillations in a cylinder. Several features are added to the classical cylindrical model. In our models we include loop curvature, longitudinal density stratification, and highly inhomogeneous radial density profiles. In this paper, we will first give an overview of recently obtained results, both analytically and numerically. After that, we shed a light on the computational aspects of the modeling process. In particular, we will focus on the parallellization of the numerical codes.     

Relativistic MHD Simulations of Jets with Toroidal Magnetic Fields

This paper presents an application of the recent relativistic HLLC approximate Riemann solver by Mignone & Bodo to magnetized flows with vanishing normal component of the magnetic field. The numerical scheme is validated in two dimensions by investigating the propagation of axisymmetric jets with toroidal magnetic fields. The selected jet models show that the HLLC solver yields sharper resolution of contact and shear waves and better convergence properties over the traditional HLL approach.     

可拓学及其研究动态

文章对可拓学进行了简要的综述和介绍，阐述了可拓学的发展与当前的研究状况，提出了该领域研究中存在的问题，介绍了新的研究进展情况。     

主成分分析用于近红外光谱定量测定高硅氧／酚醛预浸料树脂含量及挥发份含量研究

采用傅里叶变换近红外漫反射光谱技术分析了酚醛树脂固化过程的光谱变化,发现高硅氧/酚醛预浸料的近红外光谱经一阶导数处理后,被树脂信息掩盖的挥发份(乙醇)的光谱信息显露出来,由此采用处理后的光谱定量分析挥发份能取得更精确的结果。结合主成分分析法研究了高硅氧/酚醛预浸料树脂含量、挥发份含量的定量分析。结果表明,预浸料的第一主成分在树脂含量上有极高的正载荷。用主成分回归所建立的模型对未知样品预测,树脂含量和挥发份含量平均标准偏差分别为0.6114和0.1885。