基于主动阻尼控制的柔性基座振动抑制

针对安装在柔性基座上的空间机械臂运动过程中的振动问题,提出了一种改进的主动阻尼控制方案;利用参数辨识,给出了惯性矩阵估计值的显式表达式,并且在基座振动抑制控制律中加入了基座位移补偿项。对平面二连杆柔性基座机械臂进行仿真实验。结果表明:原始的主动阻尼控制虽然能够保证在机械臂运动过程中基座的振动抑振,但机械臂轨迹跟踪误差收敛较慢,改进后的控制律能够更快地缩小轨迹跟踪误差,整体的基座抑振效果更好。     

基于 FNN 机器人擦洗玻璃的力/位并环控制

对机器人的力反馈、主动柔顺控制和模糊神经网络进行了综合研究,提出了力/位并环控制策略,建立了相应的模糊神经网络结构,实施了力/位并环控制算法,在AdeptThree精密装配机器人进行了试验,取得了满意的效果。     

双压电振子异步振动主动调制湍流边界层流向涡减阻

以热线敏感丝为感受器、单片机(MCU)为控制器、双压电振子为动作器构成闭环控制回路,实现闭环主动控制湍流边界层相干结构减阻。采用安装在壁面上的展向布置的双压电振子异步振动方式,通过对压电振子输入3种不同振动频率,得到160 Hz工况实现最大减阻率为16.03%。压电振子振动使得湍动能更大程度地集中在能量峰值周围,改变了湍流边界层近壁区的含能结构,对相干结构产生调制作用。压电振子振动频率与相干结构特征频率越接近,减阻效果越好。闭环控制中控制压电振子所需要的电能节省开环的75%,实现与开环控制相近的减阻效果。施加控制加入条件检测的条件相位平均波形时间周期略变短,以压电振子壁面扰动方式调制近壁流向涡,减小壁面摩擦阻力,获得减阻效果。      

Analysis and control of inter-electrode gap during leveling process in counter-rotating electrochemical machining

The inter-electrode gap (IEG) is an essential parameter for the anode shaping process in electrochemical machining (ECM) and directly affects the machining accuracy. In this paper, the IEG during the leveling process of an oval anode workpiece in counter-rotating ECM (CRECM) is investigated. The variation of the minimum IEG is analyzed theoretically, and the results indicate that rather than reaching equilibrium, the minimum IEG in CRECM expands constantly when a constant feed speed is used for the cathode tool. This IEG expansion leads to a poor localization effect and has an adverse influence on the roundness of the machined workpiece. To maintain a small constant IEG in CRECM, a variable feed speed is used for the cathode based on a fitted equation. The theoretical results show that the minimum IEG can be controlled at a small value by using an accelerated feed speed. Experiments have been conducted using a specific experimental apparatus in which the cathode tool is designed as a combined structure of two sectors and a thin sheet. By detecting the machining currents flowing through the minimum IEG, how the latter varies is obtained indirectly. The results indicate that using an accelerated feed speed is effective for controlling the IEG, thereby improving the roundness of the machined workpiece.     

教与学优化算法在风力机变桨自抗扰控制中的应用

随着风力机的发展越来越智能化,除了要求风力机的运行可靠性,还要求其有稳定的输出功率。为了使风力机变桨控制器在运行过程中具有优良的动态品质,提出了一种自抗扰控制(ADRC)的变桨距控制方案,但ADRC也存在参数多、整定难度大这一明显缺点。为此,将教与学算法应用到ADRC的整定过程中,实现了参数的自动整定。仿真结果验证了通过教与学算法自动整定ADRC参数的可行性,与传统PID控制器相比,整定后的ADRC能较好地满足风力机变桨距控制要求,有效维持了风力机输出功率的稳定性。     

具有效率优化计算的异步电动机自抗扰与滑模直接转矩控制

为了克服异步电动机直接转矩控制中转矩和电流脉动大等缺点,设计改进的自抗扰速度控制器取代传统的比例积分(PI)控制器。根据异步电动机的数学模型以及滑模变结构控制理论设计了一种基于转矩误差和磁链平方误差的新型滑模控制器。考虑电机运行过程中负载转矩未知问题,设计了一种基于Supertwisting算法的负载转矩观测器。Supertwisting定子磁链观测器的应用提高了观测精确度。通过效率优化计算得出稳态时最优定子磁链,并将其引入调速系统。仿真试验结果表明,该控制策略有效地减小了转矩和电流脉动,并且对外部扰动具有较强抑制作用,同时能够降低电机运行损耗,具有良好的动态和稳态性能。     

直升机有源隔振系统的鲁棒控制

 消除来源于旋翼和大气紊流的叶片谐振干扰是未来直升机设计中考虑的一个重要问题。本文应用鲁棒控制理论设计的有源隔振器,有效地抑制了叶片一次和二次谐振对机身的影响;同时它还消除了直升机在升、降加速度作用下所产生的旋翼相对机身的位移。     

具有电磁约束阻尼层梁的振动主动控制研究计算(英文)

This paper investigates vibration control of beam through electro-magnetic constrained layer damping （EMCLD） which consists of electromagnet layer, permanent magnet layer and viscoelastic damping layer. When the coil of the electromagnet is electrified with proper control strategy, the electromagnet can exert magnetic force opposite to the direction of structural deformation so that the structural vibration is attenuated. A mathematical model is developed based on the equivalent current method to calculate the electromagnetic control force produced by EMCLD. The governing equations of the system are obtained using Hamilton＇s Principle and then reduced with the assumed-mode method. A simulation on vibration control of a cantilever beam is conducted under the velocity proportional feedback to demonstrate the energy dissipation capability of EMCLD, and the beam system with the same parameter is experimented. The results of experiment and simulation are compared and the results show that the EMCLD is an effective means for suppressing modal vibration. The results also indicate that the beam system has better control performance for larger control current. The EMCLD method presented in this paper provides an applicable and efficient tool for the vibration control of structures.     

Evidence for a Two-Stage Acceleration Process in Large Solar Energetic Particle Events

Using high-resolution mass spectrometers on board the Advanced Composition Explorer (ACE), we surveyed the event-averaged ∼0.1–60 MeV/nuc heavy ion elemental composition in 64 large solar energetic particle (LSEP) events of cycle 23. Our results show the following: (1) The Fe/O ratio decreases with increasing energy up to ∼10 MeV/nuc in ∼92% of the events and up to ∼60 MeV/nuc in ∼64% of the events. (2) The rare isotope ³He is greatly enhanced over the corona or the solar wind values in 46% of the events. (3) The heavy ion abundances are not systematically organized by the ion’s M/Q ratio when compared with the solar wind values. (4) Heavy ion abundances from C–Fe exhibit systematic M/Q-dependent enhancements that are remarkably similar to those seen in ³He-rich SEP events and CME-driven interplanetary (IP) shock events. Taken together, these results confirm the role of shocks in energizing particles up to ∼60 MeV/nuc in the majority of large SEP events of cycle 23, but also show that the seed population is not dominated by ions originating from the ambient corona or the thermal solar wind, as previously believed. Rather, it appears that the source material for CME-associated large SEP events originates predominantly from a suprathermal population with a heavy ion enrichment pattern that is organized according to the ion’s mass-per-charge ratio. These new results indicate that current LSEP models must include the routine production of this dynamic suprathermal seed population as a critical pre-cursor to the CME shock acceleration process.     

Microwave Diagnostics of Dynamic Processes and Oscillations in Groups of Solar Coronal Magnetic Loops

Low-frequency (LF) modulations of the solar microwave radiation (37 GHz) recorded at the Metsähovi Radio Observatory, are analyzed. Since the intensity of solar microwave radiation, produced by the electron gyrosynchrotron mechanism, is dependent on a value of the background magnetic field [Dulk, G. A.: 1985, Ann. Rev. Astron. Astrophys. 23, 169–224], slow variations of the magnetic field associated with disturbances of the electric current in a radiating source, can modulate the intensity of the microwave radiation. The observed multi-track features of the LF spectra are interpreted as a signature of a complex multi-loop structure of the radiating source. Application of the equivalent electric circuit models of interacting loops allows to explain and reproduce the main dynamical features of the observed LF modulation dynamic spectra.