Pro／ENGINEER在模具设计中的使用技巧

分析了Pro／ENGINEER进行模具设计的使用技巧，阐明了并行工程技术与Pro／ENGINEER软件相结合的重要性。     

平板上钝缘舵在超声速绕流中的三维分离特性研究

对于平板上的直立钝缘舵在M_∞=1.79、2.04和2.50的条件下,研究了该平板干扰区中的三维分离特性。着重讨论了钝缘直径、舵面迎角和来流马赫数对主分离线位置和形状的影响。分析了该类三维分离在性态上更强地依赖于无粘流动特性。此外,还对分离区内的二次分离发展过程和形态进行了初步讨论。     

基于GPS载波相位的微卫星姿态算法研究

GPS姿态系统是利用GPS载波相位测量来确定载体的航向和姿态角。本文对微卫星的GPS姿态系统进行了研究。重点解决短基线的GPS状态算法，讨论了姿态价格函数的了小化方法。测试结果表明，所提的算法对小于1m的基线是有效的。     

一种新型综合性靶场安全系统及其检验测试结果

本文首先简要介绍战略导弹发射场和航天发射场靶场安全系统的作用、特点、主要技术要求,接着介绍按美国空军航天司令部要求,由空军研究所开发的基于GPS弹道测量技术,外测、遥测、遥控综合为一体的机动型靶场安全系统——BMRST的构成及其经多种检验测试的结果。     

宽带无线接入技术

介绍了两种宽带无线接入技术：本地多点分配业务(LMDS)和自由空间光通信(FSOC)。它们各具特色。前者将新兴的LMDS技术引入无线接入网,而后者是实现无线宽带接入的另一种途径。     

GPS/INS超紧组合载波跟踪环路最优带宽在线设计

在全球定位系统和惯性导航系统组成的超紧耦合系统中,卫星信号的跟踪性能直接取决于载波跟踪环路的带宽。为提高最优带宽的计算精度,在对惯导辅助下载波跟踪环路跟踪特性进行分析的基础上,详细推导了载波多普勒频率估计误差、多普勒频率变化率估计误差的计算方式,建立了惯导辅助下的环路跟踪误差模型;在实时估计跟踪载噪比的基础上,应用离散牛顿二阶梯度法迭代解算最优带宽,并进行实时调整。仿真结果表明,所设计最优带宽迭代解算方法的计算精度能够在11次迭代内达到99.6%,以此作为环路的带宽,能够在弱信号、辅助信息精度较低的情况下有效提高环路的跟踪精度。     

SiC/CVD SiC复合涂层的抗氧化及抗热震性能研究

为了提高C/SiC复合材料耐高温性能,采用泥浆浸渍裂解与真空化学气相沉积(CVD)在材料表面制备了SiC/CVD SiC复合涂层,通过XRD、SEM分析了涂层组成与结构;研究了复合涂层的高温抗氧化(700～1 500℃)和抗热震性能。结果表明,泥浆浸渍法制备的SiC涂层具有一定的封孔效果,可使材料开孔率下降,但高温抗氧化效果并不佳,1 200℃氧化10 min后材料弯曲强度保留率下降明显仅有86%。CVD SiC涂层结构致密,与SiC封孔涂层结合较好,在700～1 500℃具有较好的抗氧化效果,随着氧化温度的升高,氧化后涂层完好,表面O元素逐渐增加,材料失重率缓慢增加但不大于0.5%,且材料性能并未下降。涂层材料在1 200℃-10 min短时热震5次后材料弯曲强度保留率仍有95%以上,且未出现开裂、剥落等热震损伤。在1 200℃-30 min长时热震10次后,涂层材料基本被完全氧化,材料失去保护作用,弯曲强度下降至90%左右。     

Evaluation of the IRI-2016 and NeQuick electron content specification by COSMIC GPS radio occultation,ground-based GPS and Jason-2 joint altimeter/GPS observations

We examined performance of two empirical profile-based ionospheric models, namely IRI-2016 and NeQuick-2, in electron content (EC) and total electron content (TEC) representation for different seasons and levels of solar activity. We derived and analyzed EC estimates in several representative altitudinal intervals for the ionosphere and the plasmasphere from the COSMIC GPS radio occultation, ground-based GPS and Jason-2 joint altimeter/GPS observations. It allows us to estimate a quantitative impact of the ionospheric electron density profiles formulation in several altitudinal intervals and to examine the source of the model-data discrepancies of the EC specification from the bottom-side ionosphere towards the GPS orbit altitudes. The most pronounced model-data differences were found at the low latitude region as related to the equatorial ionization anomaly appearance. Both the IRI-2016 and NeQuick-2 models tend to overestimate the daytime ionospheric EC and TEC at low latitudes during all seasons of low solar activity. On the contrary, during high solar activity the model results underestimated the EC/TEC observations at low latitudes. We found that both models underestimated the EC for the topside ionosphere and plasmasphere regions for all levels of solar activity. For low solar activity, the underestimated EC from the topside ionosphere and plasmasphere can compensate the overestimation of the ionospheric EC and, consequently, can slightly decrease the resulted model overestimation of the ground-based TEC. For high solar activity, the underestimated EC from the topside ionosphere and plasmasphere leads to a strengthening of the model underestimation of the ground-based TEC values. We demonstrated that the major source of the model-data discrepancies in the EC/TEC domain comes from the topside ionosphere/plasmasphere system.     

Cutting path-dependent machinability of SiCp/Al composite under multi-step ultra-precision diamond cutting

Particle-tool interactions, which govern the synergetic deformation of SiC particle reinforced Al matrix composites under mechanical machining, strongly depend on the geometry of particle position residing on cutting path. In the present work, we investigate the influence of cutting path on the machinability of a SiCp/Al composite in multi-step ultra-precision diamond cutting by combining finite element simulations with experimental observations and characterization. Be consistent with experimentally characterized microstructures, the simulated SiCp/Al composite is considered to be composed of randomly distributed polygonally-shaped SiC particles with a volume fraction of 25vol%. A multi-step cutting strategy with depths of cut ranging from 2 to 10 μm is adopted to achieve an ultimate depth of cut of 10 μm. Intrinsic material parameters and extrinsic cutting conditions utilized in finite element simulations of SiCp/Al cutting are consistent with those used in corresponding experiments. Simulation results reveal different particle-tool interactions and failure modes of SiC particles, as well as their correlations with machining force evolution, residual stress distribution and machined surface topography. A detailed comparison between numerical simulation results and experimental data of multi-step diamond cutting of SiCp/Al composite reveals a substantial impact of the number of cutting steps on particle-tool interactions and machined surface quality. These findings provide guidelines for achieving high surface finish of SiCp/Al composites by ultra-precision diamond cutting.     

Ionospheric total electron content response to annular solar eclipse on June 21, 2020

The effects of physical events on the ionosphere structure is an important field of study, especially for navigation and radio communication. The paper presents the spatio-temporal ionospheric TEC response to the recent annular solar eclipse on June 21, 2020, which spans across two continents, Africa and Asia, and 14 countries. This eclipse took place on the same day as the June Solstice. The Global Navigation Satellite System (GNSS) based TEC data of the Global Ionosphere Maps (GIMs), 9 International GNSS Service (IGS) stations and FORMOSAT-7/COSMIC-2 (F7/C2) were utilized to analyze TEC response during the eclipse. The phases of the TEC time series were determined by taking the difference of the observed TEC values on eclipse day from the previous 5-day median TEC values. The results showed clear depletions in the TEC time series on June 21. These decreases were between 1 and 9 TECU (15–60%) depending on the location of IGS stations. The depletions are relatively higher at the stations close to the path of annular eclipse than those farther away. Furthermore, a reduction of about ?10 TECU in the form of an equatorial plasma bubble (EPB) was observed in GIMs at ~20° away from the equator towards northpole, between 08:00–11:00 UT where its maximum phase is located in southeast Japan. Additionally, an overall depletion of ~10% was observed in F7/C2 derived TEC at an altitude of 240 km (hmF2) in all regions affected by the solar eclipse, whereas, significant TEC fluctuations between the altitudes of 100 km ? 140 km were analyzed using the Savitzky-Golay smoothing filter. To prove TEC depletions are not caused by space weather, the variation of the sunspot number (SSN), solar wind (V_SW), disturbance storm-time (Dst), and Kp indices were investigated from 16th to 22nd June. The quiet space weather before and during the solar eclipse proved that the observed depletions in the TEC time series and profiles were caused by the annular solar eclipse.