A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.     

GPS卫星信标信噪比的统计分析

GPS卫星信标信噪比(SNR)受到卫星上的发射机增益、地面站的接收机增益、卫星与接收机之间的几何距离、接收机处的仰角、信标传播路径上电离层介质衰减等因素的共同影响.首先提出了一种从SNR观测数据中分离出SNR在电离层中衰减的算法,并应用于MANA接收站(273.751°E,12.149°N)2003年的观测数据,得到了一个电离层介质引起的对L波段信标SNR衰减日变化的平均情况.通过与IRI模式计算的电波垂直穿过电离层时衰减的SNR比较发现,由我们得到的SNR在电波垂直穿过电离层时的衰减与IRI模式计算的衰减随地方时的变化符合得比较好.      

石墨填料对浸渗热解-熔融浸渗方法制备的C/SiC复合材料结构和性能的影响

采用石墨树脂浆料浸渍三维针刺碳毡增强体,热解后得到C/C多孔体,并采用反应熔体浸渗法制备C/SiC复合材料.研究了石墨填料对C/C多孔体的结构以及C/SiC复合材料力学性能的影响.结果 表明,石墨树脂浆料浸渍时树脂填充束间小孔形成结构致密的亚结构单元,而石墨可以有效填充胎网层等大孔隙,一次浸渍热解后碳产率有效提高.所得...     

Mining Spatial Associations with Limited Sensory Information

Abstract

Human navigation in an unknown environment requires an understanding of the spatial relationships of the terrain. For example, a soldier who is on a reconnaissance mission in a new city needs to “know” the spatial layout of the surroundings with high confidence. Oftentimes, this understanding must be acquired within a very short amount of time and with limited sensory inputs. The soldier would benefit from a digital avatar that draws inferences about the spatial layout of the city based on an initial set of observations and guides the soldier either in further exploring the environment or in making decisions based on these inferences. In this paper, we present and evaluate an inductive approach to learning spatial associations using sensory data that is available from the simulation environment of a computer game, Unreal Tournament. We study two kinds of spatial relationships between nodes on a level of a game map: nodes that are placed near each other to satisfy some spatial requirement and nodes that are placed near each other to satisfy the design preferences of a level architect. We show that we can infer both kinds of relationships using an association rule mining algorithm. Furthermore, we show how to use an ontology to distinguish between these relationships in order to discover different types of spatial arrangements on a specific map. We discuss how the inferred associations can be used to control an avatar that makes recommendations for navigating unexplored areas on a map. We conclude with some thoughts on the applicability of our methods to scenarios in the real world, beyond the simulation environment of a game, and on how the learned associations can be represented and queried by a simple question-answer type system.     

一种射频仿真时统子系统的技术设计

针对射频仿真系统中的时间同步问题,设计基于FPGA、DSP和GPS的时间统一系统。从工程实施的角度出发,详细阐述时统的硬件设计,介绍IRIG-B码的解码原理和各采样频率信号输出的过程。试验证明：该时统克服了常规时统设备的不足,性能更稳定,可靠性更高,更易于调试。     

LabWindows/CVI环境下调用Word文档的实现方法

目的介绍一种在Labwindows/CVI环境下调用Word的实现方法;方法结合具体的实例,实现对Word文档的调用;结果该方法可以按照规定的格式自动生成Word文档;结论提高了软件的效率和自动化程度。     

应用GPS载波确定载体姿态

本文简述了利用GPS载波相位技术进行载体姿态确定的原理，比较了目前已有的多种整周模糊度求解算法，选用最小二乘法进行了载体定姿实践，减少了备选整周模糊度的组合数，并采用多种约束信息来剔除不正确的模糊度组合，结合实验，指出了载体姿态变化和整周模糊度搜索速度的关系，提出了一种模糊度确定的辅助方法，并给出了应用算例。     

某型教练机起落架信号电路改进设计

针对某型教练机存外场使用时出现起落架未放到位，而飞行员却没能及时发现的问题，本文对飞机起落架信号电路进行了分析，并提出了相应的改进措施。     

应用六西格玛提高钛合金超塑成形/扩散连接产品合格率

应用六西格玛提供的质量改进方法和统计分析工具,按照界定、测量、分析、改进、控制的步骤,运用Pareto图、因果图、过程能力分析、多元回归分析等多种工具,深入分析钛合金超塑成形/扩散连接产品制造过程中产生缺陷的根本原因并采取改进措施,有效提高了制造过程能力和产品合格率。