钛合金加强框真空电子束焊接应用研究

钛合金加强框是飞机结构的重要构件,其在框段组合时机械连接与潜弧焊焊接方式均存在不足。真空电子束焊接(EBW)是实现钛合金框段组合的新型制造方式,具有显著优势。采用"积木式方法"展开系列试验研究:首先针对不同热处理制度下的TC4-DT焊接试样进行拉伸试验,通过标的参数对比获取合理的焊后热处理制度;然后通过系列焊接标准试样拉伸试验、断裂韧度试验及裂纹扩展率试验,获取基础性试验数据,并对焊接性能进行判断;最后经过短梁试验、部件试验以及机上应用,完成TC4-DT钛合金加强框EBW工程应用。结果表明:TC4-DT钛合金加强框EBW接头力学性能良好,较机械连接质量收益明显。     

倾转旋翼机冗余操纵的舵面分配策略和飞行转换路径分析

倾转旋翼机的不同舵面存在冗余操纵,而冗余舵面的分配策略和飞行转换路径对其控制重构具有重要的意义。对建立的小型无人倾转旋翼机全量非线性飞行动力学模型在不同飞行模式下的进行配平计算、模型线化后,求出单位操纵面位移所引起的俯仰、滚转和偏航力矩的改变量,即考察倾转旋翼机各操纵面的操纵功效,并对其结果进行详细分析,以确定倾转旋翼机的冗余舵面控制重构能力;确定各飞行模式下倾转旋翼机的操纵方式,给出舵面分配策略的权重系数矩阵;在此基础上,提出三种不同的全模式飞行转换路径方案,并分别计算三种方案下倾转旋翼机的飞行速度与前倾角、姿态角及操纵量的关系。结果表明:三种方案都能实现对飞行器的合理操纵,表明倾转旋翼机的冗余舵面控制重构是可以实现的。     

基体含量对复合材料结构稳定性的影响

基体含量影响着复合材料结构的性能,针对复合材料结构的稳定性设计,基于复合材料细观力学以及经典层合理论,分析复合材料层合板中的基体含量对于其材料性能,尤其是稳定性的影响.通过计算得出:随着基体含量的增加,材料的性能略有下降,但是由于基体含量增大而导致的单层板厚度增加,使得层合板的稳定性大幅提高.因此,在复合材料结构的稳定性设计中,应该考虑基体含量的影响.     

民用客机人机工效学适航认证及对策

分析民用客机人机工效学适航认证的特点和挑战,讨论国际适航当局、人机工效学学术界和航空工业界近些年来针对这些挑战所开展的一些研究和实践。结合参与国产民用客机研发的体会,对当前国产民用客机驾驶舱人机工效学型号适航认证的工作流程和方法提出建议,并对今后这方面工作的深入开展提出较为系统的框架性对策。     

Disturbance observer-based backstepping control for hypersonic flight vehicles without use of measured flight path angle

In this paper a nonlinear control method is proposed for the tracking control of hypersonic flight vehicles. The designed control laws do not utilize the measured flight path angle due to its inferior accuracy in practical engineering. For this, an estimated flight path angle is designed via the measurements of the altitude and velocity. A tracking differentiator is designed for constructing nonlinear disturbance observer which is used to estimate the model uncertainties including the parameter indeterminacies and external disturbances in the channels of velocity and pitch rate. A robust high-order differentiator is introduced to avoid the employment of the measured flight path angle and estimate the lumped disturbance in dynamics of flight path angle. Meanwhile, the possible saturation of the control inputs is considered and compensated by the auxiliary states. The boundness of closed-loop signals is proved through the Lyapunov theory. Comparative simulations are carried out and the results demonstrate the effectiveness of the proposed method.     

Preliminary study on heat flux measurement data of TT-0 flight test

With the explosive development of aerospace science, the design of the new generation airliner at higher speeds is attracting more attentions. To achieve this goal, it is necessary to achieve accurate prediction of the aerodynamic heating / force loads and successful reduction of drag and heat flux. As a remedy for the existing studies which are based upon the CFD and wind tunnel tests, this study presents a flight test for the drag and heat reduction spike technology. The principal goals of this flight test were to provide reference for verifying the accuracy of the prediction technology on ground and promote the development of the drag and heat reduction technology. By adopting the OS-X rocket, the TT-0 test vehicle designed by Shenyang Aircraft Design & Research Institute reached a maximum Mach number of 5.8 and a maximum altitude of 38 km. Hypersonic and supersonic pressure data by pressure scanning valves and heat fluxes by gauges at different locations were obtained successfully. Also, heat fluxes obtained by in-house CFD code are illustrated in comparison with the flight data. The results indicate that the numerical errors are large in most cases. More technologies, such as more CFD codes and more numerical procedures, should be adopted to conduct studies on this issue in the future.     

飞行载荷发展综述

飞行载荷设计是飞行器设计的一个重要组成部分,是连接总体气动设计和结构强度设计的桥梁。本 文从飞行载荷设计所需要遵循的规范、飞行载荷的设计方法、严重载荷选取、飞行载荷的验证等方面对飞行器 飞行载荷设计的发展历程进行了回顾,并对未来飞行载荷的发展方向进行了展望。     

轨道转移计算中的逐次消元迭代法

本文针对导弹飞行轨道转移的一个算例,叙述应用消元法思想构造数值求解非线性方程组的迭代算法的一般原理,具体算法步骤和一些计算结果。给出算法成功的理论依据,最后给出实现算法时的一些变形。     

两自由度球面并联机构动力学分析(英文)

运用旋量理论的方法推导出两自由度球面并联机构的速度、加速度解析表达式,在此基础上依据虚功原理和旋量的互易积形式建立了该机构的动力学模型,得到了两驱动电机的驱动转矩方程.通过对动力学模型的变换,获得了动力学方程的形位空间模式及相关系数.通过一个实例表明,动力学方程中的惯性系数和重力项占有的比重较大,而哥氏力系数和离心力系数占有的比重较小,他们在数值上相差一个数量级.但是否可以忽略后者需要判断速度的大小,只有当机构运动速度较小时才可以将哥氏力和离心力忽略.     

二维翼型非定常运动的涡流场显示--2俯仰运动和沉浮/俯仰联合运动

介绍了在水洞中进行的二维机翼纯俯仰运动和沉浮/俯仰联合运动时的流动显示实验.实验结果揭示了机翼做纯俯仰运动时尾迹涡街的特性以及与Strouhal数(Ste)的关系.在Ste=0.105附近,涡街排列成一条线;大于该值,为逆Karman涡街;小于该值,为正Karman涡街.机翼做沉浮/俯仰联合运动时,尾迹中总是出现逆Karman涡街.结合数值计算结果说明,机翼做沉浮/俯仰联合运动时,推力及最大有效迎角与沉浮和俯仰运动之间的相位差有关.并讨论了前缘涡与后缘涡相互作用对推力的影响.