永磁约束电子束轨迹实验研究

通过设计并运用一种直流电子束轨迹简易测量方法,开展了永磁约束电子束轨迹实验研究,得到了永磁铁环对60~80 ke V电子束约束作用的实验数据。结果表明:该测量方法方便有效,结果较为准确;永磁铁对电子束聚焦作用明显,并呈现出一定的规律性。对永磁铁约束电子束研究工作奠定了基础。     

柔性接头角刚度及弹性件剪切应变的精确计算

角刚度（又称弹性比力矩）及弹性件在最大摆角下的剪切应变是固体发动机柔性接头设计的重要指标。在考虑固体火箭发动机柔性接头层弹性件几何尺寸的差异的基础上,推导了角刚度及弹性件剪切应变的精确计算公式。算例表明,该方法计算精度更高。     

反台晶体及其应用

介绍了应用离子束刻蚀技术制作高基频反台晶体谐振器及反台晶体谐振器的应用。     

飞机下滑波束导引系统设计及仿真

下滑波束导引系统是飞机在自动着陆时所采用的一种重要无线电波束导引系统。首先,简要阐述了下滑波束导引系统的基本工作原理;然后,对导引系统的运动学环节及下滑耦合器进行分析,对飞机下滑波束导引系统结构进行设计;最后,在MATLAB平台下,对所设计的下滑波束导引系统进行大量仿真研究。仿真结果显示。所设计的下滑波束导引系统结构是合理的,其控制系统是稳定的,且其稳态性能也得到改善。     

Antenna pattern control of planar arrays for long distance communications

As an alternative to standard antennas and due to the advent of low-cost digital processors and materials, adaptive antenna arrays are increasingly considered for applications in long distance communications. The pattern beam control potentialities provide the performance improvement of the communication systems. In this context, this work presents a technique that permits to synthesize the antenna pattern of a planar array. Considering that the relationship between the array factor and the array excitations for the far field region is a Fourier transform in the appropriate variables, the non-uniform sampling procedure is extended for planar arrays. These arrays permit a further control of the antenna pattern since two dimensions of space are used. The technique considers a number of array factor points equal to the array size, which is used to impose appropriated values in the antenna pattern. The produced array factor passes through those points with the desired values, which allows the synthesis of antenna patterns with appropriated characteristics. The theory is presented in order to develop the necessary direct expressions to calculate the array excitation. The array factor can be obtained using the inverse Fourier transform. As application examples, with this technique it is possible to define the level of each sidelobe of the antenna pattern, to control the main beam and to impose nulls in prescribed directions of the pattern.     

挠性空间结构的H∞辨识

重点研究挠性空间结构的Ｈ∞辨识，研究表明：依据系统的输入输出空间，对系统的未知动力学参数估计和对高维数截断的适当操作，将导致适合于控制的低维数学模型。模型维数确定时，系统模型与实际系统的距离在Ｈ∞范数的意义下几乎为最小，模型维数足够大时，系统模型与实际系统的距离可任意小，这是文下间提出了挠性空间结构Ｈ∞辨识的基本思想，为此，以带挠性梁的卫星系统为背景，首先分析了系统的动力学特性，引入了挠性系统Ｈ∞     

挠性智能梁的可镇定性

研究采用共位配置的分布式压电敏感器和致动器的挠性悬臂梁的可镇定性问题，给出两种敏感器和致动器分布函数的表达式，并验证它们满足系统可镇定的条件。证明了在其中之一的一种分布函数下，闭环系统是指数稳定的。     

超静超稳卫星碰振动力学建模

针对分离式卫星载荷模块(PM)受到扰动时可能与服务模块(SM)发生碰撞的问题，综合音圈电机反电动势(back-EMF)和柔性线缆动力学的效应，基于牛顿欧拉法建立了分离式卫星(DFP)载荷模块动力学模型。基于Hertz接触理论，推导了分离式卫星碰撞过程中连续接触力模型，并分析了碰撞过程中产生的接触力对载荷模块指向精度和指向稳定度的影响。数值仿真结果表明，碰撞使得载荷模块指向精度和指向稳定度下降5个数量级，碰撞后载荷模块可再次恢复到超静超稳工作状态，恢复时间超过1400 s。本文建立的碰撞模型对研究分离式卫星碰撞规避和碰撞控制具有重要意义。     

Structurally coupled characteristics of rotor blade using new rigid-flexible dynamic model based on geometrically exact formulation

In rotor dynamics, blades are normally modelled as a slender beam, in which elastic deformations are coupled with each other. To identify these coupling effects, new rigid-flexible structural model for helicopter rotor system is proposed in this paper. Finite rotations of the whole blade(on flapwise, lagwise, and torsional) are described as three global rigid degrees of freedom.The nonlinear deformation geometrics of the beam is built on geometrically exact beam theory.New expressions for blade ...     

钛合金TC4的超硬磨料柔性抛光轮数控抛光试验研究

航空发动机叶片钛合金材料在数控磨抛加工中容易发生烧伤及黏附现象,针对常用的TC4材料开展了超硬磨料柔性抛光轮数控抛光试验研究。分析了超硬磨料柔性抛光轮抛光参数中转速、进给速度、预压量及行距对抛光去除深度及抛光后试件表面粗糙度的影响规律并通过正交试验分析了各抛光参数影响的主次关系。确认了钛合金试件抛光表面黏附物质成分,并同时分析了表面黏附物的形成原理。给出了TC4钛合金材料在超硬磨料柔性抛光轮数控抛光过程中工艺参数的选择策略,为TC4材料的航空发动机叶片和整体叶盘在超硬磨料柔性抛光轮数控抛光过程中提供理论依据和技术基础。