机翼结构有限元的快速建模及自动化调整

为提高总体设计的质量和效率,研究了在OpenCADS(Open Conceptual Aircraft Design System)这一按照面向对象方式进行数据组织的计算机辅助飞机总体设计系统中进行飞机机翼结构有限元快速建模及自动化调整的措施.提出了采用梁单元和壳单元进行概念设计中机翼结构有限元的等效处理方法,定义了以翼肋为标定的结构有限元节点及各单元的编号规则,设计了相关的数据类组织与应用逻辑,以此为基础实现了机翼结构有限元模型的自动化调整,为概念设计阶段进行多学科设计优化奠定了基础.通过设计实例及其应用验证了方法的有效性和可靠性.      

一种用于分离流动的网格自适应算法

对于可压缩粘性流动,提出利用流场速度的紊乱度作为指示变量进行网格自适应.Jameson中心格式有限体积法、五步Runge-Kutta时间推进法/双时间推进法求解定常/非定常N-S方程.基于雷诺平均N-S方程模拟紊流,选用SA一方程模型.在数值求解二维静态失速和动态失速问题过程中,加入网格自适应算法,提高数值模拟对流动分离特性的捕捉和分辨能力.算例结果表明在流场发生失速后,运用本文的自适应算法能够在增加少量网格单元的情况下明显提高计算精度.     

小型辐射定标光学系统的光机热集成分析

卫星遥感器辐射定标光机系统在模拟空间环境下的热学光学特性会影响辐射定标试验的精度。文章针对离轴抛物镜和辅助平面反射镜组成的小型定标光学系统,利用光机热集成分析技术建立其有限元模型,在模拟空间环境下进行热变形分析;选用在单位圆内正交的Zernike多项式作为基底函数,采用最小二乘法完成了离轴抛物镜面形的拟合;将相关数据读入光学软件,分析了该系统在模拟空间环境下的像质变化。结果表明:温度梯度对定标光机系统的影响主要表现在光学平台的刚性位移,对抛物镜面形影响非常小,光学系统像质变化量约为λ/37。最后,通过与刀口仪法的像质原位测量结果对比,证明了光机热集成分析结果的准确性。     

翼型测力天平的研制

为研究翼型结冰状态下的载荷变化规律,对翼型进行测力实验.研制一台三分量翼型测力天平.天平设计的突出难点为设计载荷极不匹配,阻力测量载荷很小.设计时,针对翼型载荷的特点,采用片梁组合方式测量阻力,四柱梁测量法向力及俯仰力矩,并采用有限元方法对结构进行了验证计算.主要介绍天平的设计、校准及应用情况.     

Large-scale Vacuum Vessel Design and Finite Element Analysis

The vacuum plume effects experimental system (PES) is the first experimental system designed to study the effects of vacuum plume in China. The main equipment, a vacuum chamber of 5.5 m in diameter and 12.8 m in length, and structure design of hinged door are described. The finite element method (FEM) is adopted to analyze the static strength and stability of the PES vacuum chamber. It is demonstrated that the static strength and stability are qualified. For the 5.5 m diameter vacuum chamber door, three design schemes are put forward. After comparisons are made, the single-axis-double-pin hinged door is selected. The FEM is applied to checking its static strength as well as distortions. The results show that the door’s distortion and displacement change mainly due to the gravity of the door which leads to its sinking. The calculated displacement is less than 7.8 mm, while the actual measurement is 5 mm. The single-axis-double-pin hinged door mechanism completely satisfies the design requirements. This innovative structure can be introduced as a reference for the design of large-scale hinged doors.     

空间相机支撑结构选型动力学分析

在航天遥感领域,离轴三反射镜消像散光学系统(TMA)以大视场、无遮拦等特点被广泛运用。由于离轴TMA系统的特点以及空间相机在发射过程中经历的恶劣的力学环境,相机支撑结构的力学特性对于相机成像品质的保证具有至关重要的意义。文章用Solidworks建立了支撑结构的实体模型,并在此基础上建立了有限元模型。通过对4种结构构型方案的力学特性的分析比较,为相机光机结构设计打下了基础,对三反离轴相机支撑结构的工程设计具有一定的指导作用。     

Full-scale crash test and FEM simulation of a crashworthy helicopter seat

Crashworthy seat structure with considerable energy absorption capacity is a key component for aircraft to improve its crashworthiness and occupant survivability in emergencies.According to Federal Aviation Administration(FAA) regulations,seat performance must be certified by dynamic crash test which is quite expensive and time-consuming.For this reason,numerical simulation is a more efficient and economical approach to provide the possibility to assess seat performances and predict occupant responses.A numerical simulation of the crashworthy seat structure was presented and the results were also compared with the full-scale crash test data.In the numerical simulation,a full-scale three-dimensional finite element model of the seat/occupant structure was developed using a nonlinear and explicit dynamic finite element code LS-DYNA3D.Emphasis of the numerical simulation was on predicting the dynamic response of seat/occupant system,including the occupant motion which may lead to injuries,the occupant acceleration-time histories,and the energy absorbing behavior of the energy absorbers.The agreement between the simulation and the physical test suggestes that the developed numerical simulation can be a feasible substitute for the dynamic crash test.      

大挠性空间桁架结构的动力学建模与仿真研究

对航天器结构中常用的一字型空间桁架,基于建立的普通式和拉索式空间桁架结构简化模型,用有限元法建立空间桁架结构模型,分别对两种空间桁架结构的模态特性、谐响应和瞬时激励响应等动力学特性进行了仿真研究,分析了拉索式空间桁架结构的弦张力对桁架结构振动特性的影响。研究较好地模拟了大挠性空间桁架结构的动力学特性及其在外太空的真实工况,有一定的参考意义。     

柔性锥-杆式对接机构碰撞过程仿真研究

以中小型航天器普遍采用的锥-杆式对接机构为研究对象,提出一种柔性对接锥作为缓冲系统的方案,用柔性锥变形吸收撞击能量作为缓冲。用有限元法对碰撞过程进行仿真,讨论了柔性对接锥作为缓冲系统的性能对对接过程的影响。仿真结果表明:与普通对接锥相比,柔性锥能减小碰撞力峰值50%多。     

3D-Cf / Mg 复合材料的热残余应力研究

采用随动硬化有限元模型,研究了三维碳纤维增强镁基复合材料(3D-Cf/Mg)基体热残余应力的大小、分布以及不同工艺处理对热残余应力的影响。同时,对复合材料进行了高、低温处理,利用XRD定性分析了处理前后复合材料基体热残余应力的变化。计算结果表明:经过-196℃低温处理后,复合材料基体的平均Mises热残余应力由169.06 MPa减小至55.29 MPa;高温处理后,基体平均热残余应力几乎不变。该结果与实验结果吻合,证明了低温处理能明显降低复合材料基体的热残余应力。