FY-2卫星应急章控技术的改进与实现

海上测控系统＂风云二号＂（FY-2）控制处理软件在应急章动控制中存在加速度负向过零时刻计算不准、应急章动控制反弹跳以及交叉控制过程脉冲前沿时间补偿等技术难点。在分析应急章动控制原理的基础上,提出了改进方案,并给出了软件实现的具体流程图。经过＂风云二号＂04～06星内部联调以及与测控中心联调任务的验证,软件计算结果准确,运行稳定可靠,实际控制效率较高。     

一种基于Particle Filter的攻击目标高度估计算法

利用目标高度估计确定目标攻击要害点是精确制导武器信息处理中的一个重要内容。传统方法主要有直接利用几何方法估计和扩展卡尔曼滤波器方法,这两种方法精度都不高。Partic le F ilter是一种新出现的滤波方法,在解决非线性问题中得到了广泛应用。利用Partic le F ilter设计了一种新的目标高度估计算法。该算法通过贝叶斯递推方法,避免了在测量方程非线性很强的时候,扩展卡尔曼滤波器不合理的线性化所带来的误差。仿真结果表明,这种基于Partic le F ilter的目标高度估计算法提高了估计精度和收敛的鲁棒性。     

光电信息传输技术研究

文章对光电信息传输技术进行了研究，介绍了一种光电信息传输装置的组成和工作原理，并对其关键技术进行了分析。     

Adaptive Square-Root Cubature–Quadrature Kalman Particle Filter for satellite attitude determination using vector observations

A novel algorithm is presented in this study for estimation of spacecraft?s attitudes and angular rates from vector observations. In this regard, a new cubature–quadrature particle filter (CQPF) is initially developed that uses the Square-Root Cubature–Quadrature Kalman Filter (SR-CQKF) to generate the importance proposal distribution. The developed CQPF scheme avoids the basic limitation of particle filter (PF) with regards to counting the new measurements. Subsequently, CQPF is enhanced to adjust the sample size at every time step utilizing the idea of confidence intervals, thus improving the efficiency and accuracy of the newly proposed adaptive CQPF (ACQPF). In addition, application of the q-method for filter initialization has intensified the computation burden as well. The current study also applies ACQPF to the problem of attitude estimation of a low Earth orbit (LEO) satellite. For this purpose, the undertaken satellite is equipped with a three-axis magnetometer (TAM) as well as a sun sensor pack that provide noisy geomagnetic field data and Sun direction measurements, respectively. The results and performance of the proposed filter are investigated and compared with those of the extended Kalman filter (EKF) and the standard particle filter (PF) utilizing a Monte Carlo simulation. The comparison demonstrates the viability and the accuracy of the proposed nonlinear estimator.     

Filters for manufacturability in design optimization of variable stiffness composites

In the design optimization of variable stiffness composites, manufacturing constraints imposed by the automated fiber placement technology must be considered. In the present paper, two filters are proposed to address this issue, and they are incorporated into the Shepard interpolation-based design optimization framework developed in our previous studies. The fiber angle arrangement of a composite is represented by a continuous function that interpolates fiber angles at scattered design points. Two filters are appointed for each design point to deal with two typical manufacturing constraints, i.e., fiber curvature and gap/overlap. At each design point, the sensitivity is first filtered in a rectangular region around this point, and by this means the fiber curvature is controlled; then in another rectangular region around this design point, the filtered sensitivities are averaged, and the result is used to update the corresponding design variable. Several numerical examples are investigated, and the results show that the proposed method is effective.     

时变微弱扩频信号检测

提出了一种解决微弱高动态扩频信号捕获的新方法,利用分数阶域滤波设计了伪码—时频联合匹配滤波的框架,最后进行了相关计算并给出了应用实例。     

基于局部平稳AR模型的信号结构变化点精确估计方法

研究了局部平稳AR模型,提出了基于递归辅助变量（RIV）双格型滤波算法,通过统计分析信息量AIC的变化精确估计信号结构变化点。对遥测速变参数的分析表明,该方法能够精确定位信号结构的变化点,实现局部平稳信号的精确分割。     

集中空调新风系统常见故障及排除方法

通过对空调新风系统重要性的分析,指出了影响集中空调系统新风量和新风品质的原因,提出了运用预埋法兰连接风管来保证新风量,在通风井底部设检查口清理新风竖井保证新风品质。     

磁暴期间的地磁导航精度分析

地磁导航是无源自主导航技术研究的新方向. 分析了地磁导航的基本原理, 描述了典型磁暴过程, 并针对地磁导航在磁暴环境中的适用性进行了研究. 在采用曲面样条方法对实测地磁场数据建立观测模型的基础上, 结合广义卡尔曼滤波方法讨论了磁暴不同阶段对地磁导航精度造成的影响. 分别采用理论典型磁暴数据以及实测磁暴数据进行仿真, 仿真结果表明, 在磁暴的初相、恢复相的中后时段以及中等强度以下的磁暴全过程仍然可以采用地磁来进行导航定位, 导航精度在200 m以内, 满足飞行器中程制导的精度要求.