建模与仿真VV＆A辅助软件设计与实现

设计开发了MSVAS（建模与仿真VV＆A（校核、验证和确认）辅助软件）,提高导弹动力学仿真系统VV＆A自动化程度。过程管理模块通过工程配置文件设计,提供VV＆A流程的图形化设计与管理、任务安排等功能,指导VV＆A工作顺利进行;评估分析模块提供方法库,为各类具体评估工作提供技术方法支持;模型测试模块提供各种试验设计方法,目的是为充分测试评估模型的可信性设计各类测试实例;资源管理模块对导弹动力学系统VV＆A所涉及到的数据、模型和文档等资源进行了合理、有效的管理。MSVAS能为导弹动力学仿真系统VV＆A提供过程管理、技术等支持,提高了VV＆A工作效率,并减轻工作者的负担。     

Modified energy cascade model adapted for a multicrop Lunar greenhouse prototype

Models are required to accurately predict mass and energy balances in a bioregenerative life support system. A modified energy cascade model was used to predict outputs of a multi-crop (tomatoes, potatoes, lettuce and strawberries) Lunar greenhouse prototype. The model performance was evaluated against measured data obtained from several system closure experiments. The model predictions corresponded well to those obtained from experimental measurements for the overall system closure test period (five months), especially for biomass produced (0.7% underestimated), water consumption (0.3% overestimated) and condensate production (0.5% overestimated). However, the model was less accurate when the results were compared with data obtained from a shorter experimental time period, with 31%, 48% and 51% error for biomass uptake, water consumption, and condensate production, respectively, which were obtained under more complex crop production patterns (e.g. tall tomato plants covering part of the lettuce production zones). These results, together with a model sensitivity analysis highlighted the necessity of periodic characterization of the environmental parameters (e.g. light levels, air leakage) in the Lunar greenhouse.     

Soybean cultivar selection for Bioregenerative Life Support Systems (BLSSs) – Hydroponic cultivation

Four soybean cultivars (‘Atlantic’, ‘Cresir’, ‘Pr91m10’ and ‘Regir’), selected through a theoretical procedure as suitable for cultivation in BLSS, were evaluated in terms of growth and production. Germination percentage and Mean Germination Time (MGT) were measured. Plants were cultivated in a growth chamber equipped with a recirculating hydroponic system (Nutrient Film Technique). Cultivation was performed under controlled environmental conditions (12 h photoperiod, light intensity 350 μmol m⁻² s⁻¹, temperature regime 26/20 °C light/dark, relative humidity 65–75%). Fertigation was performed with a standard Hoagland solution, modified for soybean specific requirements, and EC and pH were kept at 2.0 dS m⁻¹ and 5.5 respectively.     

气膜约束对轴系固有频率影响的试验

对10kg转子进行自由状态和有气膜约束两种状态下的试验模态分析,试验结果给出了转子平动、锥动和一阶弯曲时的固有频率及其振型等模态参数,分析了轴承供气压力变化对轴系固有频率的影响.进行了轴系升降速试验,结果表明:气膜约束下的模态分析结果比自由状态下的更接近于升降速试验的结果.试验结果为气体轴系固有频率的确定以及控制参数的选取提供了依据,也为下一步轴系振动控制奠定了基础.      

非对称喷管超声速流场的PIV实验与数值模拟

选取了跟随性能以及散射性能都上佳的二氧化钛粒子,利用了粒子图像测速仪(particle image velocimetry,PIV)对不同落压比下的非对称喷管(single expansion ramp nozzle,SERN)流场进行了测量,成功获取了相应流动结构,以及沿程上壁面压力分布和速度场等.在测得的图像中,可以清晰地观察到由于过膨胀产生的激波与膨胀波系,并进一步获得出口速度分布.运用计算流体动力学数值模拟方法,对实验状态下的非对称喷管进行了模拟.对比结果发现:PIV实验测得流场结构能很好地与其吻合,这互相验证了CFD计算和PIV实验的正确性及可靠性.      

SPH方法对气液两相流自由界面运动的追踪模拟

气液两相流动是自然界中常见的流动现象,对其进行数值模拟时要求必须能够准确跟踪界面运动变形。本文利用光滑粒子流体动力学方法,结合微可压缩模型(SCM),引入界面控制方法XSPH速度修正以及Van Derwaals状态方程修正,对典型的气液两相流动如二维溃坝、气泡上浮等问题进行了数值模拟,分析了空气和水相互作用机理以及界面运动规律,并同实验结果和其他数值计算结果进行了比较。结果表明,该方法在模拟多相介质界面运动问题准确有效,可用于处理更为复杂的多相流动工程问题。     

基于复合疲劳试验的涡轮叶片振动应力反推法

提出了一种利用复合疲劳试验和外场故障数据反推涡轮叶片实际振动应力的方法.该方法针对与故障叶片同批次的叶片,开展数个振动应力水平下的单件试验和某一特定振动应力水平下的成组试验,利用极大似然法推导出叶片的概率-应力-寿命曲线(P-S-N);最后基于99.87%存活率下的概率-应力-寿命曲(P_99.87%-S-N),结合叶片的外场故障统计结果,反推出叶片实际工作中振动应力的范围和可能的最大振动应力.      

基于气动热力模型的FADEC系统FHA方法

从适航规章对全权限数字发动机控制(full authority digital engine control,简称FADEC)系统的安全要求出发,结合功能危险分析(functional hazard assessment,简称FHA)的一般原则和FADEC系统的特点,得到了FADEC系统FHA的分析要素.根据分析要素中的工具与数据需求,将航空发动机气动热力模型用于可调放气活门(variable bleed valve,简称VBV)控制功能失效危险分析,结果表明:①该模型能够辅助确定FADEC系统功能失效的发动机影响;②FADEC系统功能危险的模型分析方法通过定量分析确定发动机影响的危险等级,为FHA提供直观的参考依据,可作为对专家经验的补充.      

GNSS-R concept extended by a fine orbit tuning

Small changes in semimajor axis of the orbits selected for the GNSS-R [R as Reflectometry] satellites, so-called fine orbit tuning, known from the ESA’s Gravity and steady-state Ocean Circulation Explorer mission, can dramatically increase the number of nadir and off-nadir reflecting points and, in turn, can enhance the capability of the concept of bistatic altimetry (GNSS Reflectometry) without additional costs. The application of our suggestion is feasible for a satellite which will be equipped by thrusters for the orbit keeping. During the mission lifetime several orbit tunings are feasible, just to transfer from one to another orbit. Then we can study short-periodic or longer-periodic features, according to scientific goals defined for the mission. The shortest cycles (few days), corresponding to the required revisit time (defined by ESA), may be subcycles of much longer cycles (repeat periods).     

洞映射方法的研究和改进

针对传统洞映射方法存储大的缺点,对"广义封闭"的概念进行扩展,提出了最小洞映射方法,该方法允许挖洞曲面结束于网格截断面,有效缩小了洞映射区域,节省了存储开销.对适用于广义封闭的洞映射单元识别方法进行了分析,指出了用物面信息判断映射单元属性可靠性较差.发展了一种新的特别适合广义封闭问题的识别方法:"Inverse mark",使用计算网格结点信息自动识别洞外单元,再作为初始点在网格内部推进.研究表明:"Inverse mark"方法计算效率高,可靠性好,自动化程度高,有效提高了重叠网格方法对缝隙等局部复杂结构的适应性