凹坑强化传热的研究进展回顾

基于涡流发生的凹坑强化换热是一种新型高效的强化换热和冷却技术,其主要特点是传热强度大,流动阻力小,综合传热性能高.通过近十年来凹坑强化换热研究工作的回顾,介绍凹坑壁面的换热阻力特性和涡流结构,并讨论凹坑形状、深度和雷诺数等参数的影响.通过介绍凹坑在旋转通道、圆管和冲击耙面等不同情况下的换热阻力特性,以及与肋等的综合传热性能对比,旨在说明凹坑是一种很具潜力的新型强化换热结构,具有十分广泛的应用前景.      

Experimental Investigation on Performance of Pulse Detonation Rocket Engine Model

The PDRE test model used in these experiments utilized kerosene as the fuel, oxygen as oxidizer, and nitrogen as purge gas. The solenoid valves were employed to control intermittent supplies of kerosene, oxygen and purge gas. PDRE test model was 50 mm in inner diameter by 1.2 m long. The DDT （deflagration to detonation transition） enhancement device Shchelkin spiral was used in the test model. The effects of detonation frequency on its time-averaged thrust and specific impulse were experimentally investigated. The obtained results showes that the time-averaged thrust of PDRE test model was approximately proportional to the detonation frequency. For the detonation frequency 20 Hz, the time-averaged thrust was around 107 N, and the specific impulse was around 125 s. The nozzle experiments were conducted using PDRE test model with three traditional nozzles. The experimental results obtained demonstrated that all of those nozzles could augment the thrust and specific impulse. Among those three nozzles, the convergent nozzle had the largest increased augmentation, which was approximately 18%, under the specific condition of the experiment.     

Night-time total electron content enhancements at equatorial anomaly region in China

This paper presents small scale (duration ?1 h, ΔTEC ? 1TECU) night-time total electron content (TEC) enhancements observed at the equatorial anomaly region in China, for the first time. The data is from a GPS receiver chain established in 2005 by Institute of Center for Space Science and Applied Research, Chinese Academy of Sciences and a GPS receiver of International GPS Service (IGS), located between Fuzhou (26.1°N, 119.3°E) and Nanning (22.8°N, 108.3°E). Two other GPS observations of IGS taken at higher latitude were also used to investigate the localization of such phenomenon. The characteristics of the night-time TEC enhancement are examined with two case studies. The TEC increases about 1–3TECU, intermittently. While the night-time TEC enhancement mainly occurs at the equatorial anomaly region, it can be observed at middle latitude as well. The spatial size of the enhancement region is less than 5° in longitude. The primary statistical study shows that the TEC enhancement is more often observed in spring and autumn, but rarely in summer. It has no dependence on geomagnetic activity. The enhancement can occur both before and after midnight.     

矩形通道中亚尺度肋片的流动换热数值分析

对装有不同结构亚尺度肋片矩形通道的流动和换热进行了数值模拟,获得了通道流场、温度场分布以及平均努塞尔数的基本特征,对各种肋片通道的换热特性进行了对比分析.计算结果表明:亚尺度肋片距主肋片根部越近越有利于散热;在远离热面区域,亚尺度肋片的比表面积越大传热效果越好.当扩展表面积相同时,亚尺度肋片的长宽比越大换热效果越好;计算结果及分析揭示了控制肋片最优几何形状的统一原则——广义温度梯度均匀化原则,并依照此原则确定了可以强化换热的较优的肋片结构.计算分析表明广义温度梯度均匀化原则可以控制对流换热过程的传热强化.      

Recent advances in film cooling enhancement: A review

Film cooling is an indispensable scheme in the design of highly-efficient cooling configurations to satisfy the thermal protection requirement of turbine hot section components. During the last few decades, vast efforts have been paid on the discrete-hole film cooling enhancement. In this paper, some of the recent literatures related to the passive strategies (such as shaped film cooling holes, upstream ramps, shallow trenches, mesh-fed slots) and the active strategies (such as the use of pulsation modulating device or plasma actuator) for film cooling enhancement are surveyed, with the aim at presenting an updated overview about the state of the art in advanced film cooling. In addition, some challenging issues are also outlined to motivate further investigations in such a broad topic.     

低纬Pc3脉动和电离层电流体系

假设在低纬地区有一根磁力线振荡,从基本方程出发,推算出地面各点的磁场扰动情况,模拟低纬Pc3脉动。对比低纬地区Pc3脉动的观测结果,可以看出用这种理论数值模拟的结果基本上与观测事实相符,用它可以初步解释低纬Pc3脉动的频率特性和偏振特点。     

光离子化技术在肼类气体监测中的应用

肼类化合物是一种广泛应用于航天领域的液体火箭燃料。如在运输或操作中不慎泄露 ,可造成严重的环境污染 ,甚至会危害人员的生命健康。文章介绍了光离子化检测器在肼类气体监测中的应用 ,阐述了监测仪的设计思想。该仪器采用了光离子检测器 ,使其具有结构紧凑 ,体积小 ,质量小等特点。监测仪可对周围环境中肼类气体浓度的变化进行实时监测 ,并能自动予以声、光报警。实际使用表明 ,使用了光离子检测器的监测仪便于携带 ,监测准确度高 ,性能稳定 ,操作简单 ,既适用于野外现场监测 ,也适用于室内环境监控。     

基于灰色预测的加速试验机理一致性判定方法

确定失效机理一致性条件是保证加速试验正确性的前提之一.由于现有的一致性判定方法只能利用加速试验数据,不能指导加速试验设计,因此需要一种基于强化试验数据的一致性判定方法.针对工程中强化试验数据少的特点,选取可以处理少数据的灰色预测,给出了一致性判定的新方法及流程.该方法通过将灰色预测中的GM(1,1)和等维新息模型相结合,找出强化试验数据的趋势改变点,在加速试验之前得到机理一致性变化的条件.通过在加速度计中的应用案例,验证了该方法的可行性.     

基于拉格朗日拟序结构的局部激励流动分离控制有效性分析方法

从流体输运角度提出了用于局部周期激励流动分离控制有效性研究的数值分析方法。基于有限时间不变流形理论建立用于非定常流动的流体输运分析方法,并采用数值方法从非定常流场中提取得到吸引拉格朗日拟序结构（LCSs）和排斥LCSs描述流体输运行为。通过对局部周期激励的流动分离控制规律的研究,结果表明存在三种与激励频率相关的影响翼型气动特性的流体输运模式,其中在锁频激励下吸引LCSs在前缘形成的尖楔结构有效增强主流与分离区流体的物质交换,减小翼面流动分离区的面积,显著提高翼型升力。     

多斜孔壁与机加环气膜冷却燃烧室面换热特性数值研究

数值研究了在燃烧室实际工作条件下,多斜孔壁冷却燃烧室和机加环气膜冷却燃烧室的流动、换热特性,比较分析了内、外壁温度场以及冷却流量的变化.研究发现,采用多斜孔壁后,壁面冷却效果得到强化,相比机加环气膜冷却燃烧室,燃烧室前段壁温略有升高,而后段受到气膜冷却效果增强的影响,壁面温度有所降低,壁面温度梯度明显减小.流量系数明显减小,冷却空气量降低23%,用于组织燃烧用气量增加.多斜孔壁冷却技术可以为高温升燃烧室的发展提供有效的冷却技术.