扭矩扳子检定装置量值传递相关问题探讨

通过对扭矩量值传递中有关器具工作原理及工作时受力的分析,指出了用扭矩扳子检定装置检定扭矩扳子时检定结果难以一致的原因,给出了解决办法,并进行了验证。     

低本底α、β测量仪效率校准研究

简述了低本底α、β测量仪效率校准的基本原理,研究了自吸收和面积与探测效率的关系,评定了效率校准中的不确定度,并分析了效率在α、β样品测量中的应用。     

一种用于 ACAS 的相位校准方法

校准是用于 ACAS 发射机的一项关键技术,本文给出了一种新的基于比相的实时校准方法,去除了发射通道幅度对通道相位差的影响,介绍了该方法的原理,并在 FPGA 硬件平台上完成了该方法的仿真和验证,通过实测数据的分析与处理,证明了这种方法的可行性     

First astrometric observations of space debris with the MéO telescope

The MéO (for Métrologie Optique) telescope is the Satellite and Lunar Laser Ranging (SLR) dedicated telescope of Observatoire de la Côte d’Azur (France) located at plateau de Calern. The telescope uses an altazimuth mount. The motorization of the mount has a capability of 6 deg/s allowing the follow up of Low Earth Orbits (LEO) satellites, as well as Medium Earth Orbits (MEO) and geostationary (GEO) satellites, and the Moon. The telescope has a primary mirror of 1.54 m. It uses a Nasmyth focus equipped with an EMCCD camera. The telescope field of view, defined by the equivalent focal length and the size of the camera, is currently 3.4 arcmin × 3.4 arcmin.     

8400压力测量采集系统的校准

在压力测量的实际应用中,压力校准成为一种新的技术需求。本文介绍了8400压力测量系统的结构组成及特点,对该系统提出一种切实有效的校准方法。通过该校准方法,可保证8400压力测量系统的准确可靠,为工程实际应用提供更好的技术支撑。     

基于动态故障树的故障隔离程序分析方法

传统的故障隔离程序采用常规静态故障树进行故障分析，可能会导致故障原因分析不全、故障隔离路径过于繁琐等问题。提出基于系统原理和动态故障树进行故障隔离程序分析的方法，以某飞机防火系统引气导管过热探测系统故障为实例，进行系统设计原理和故障告警逻辑分析，引入动态逻辑门，构建具有顺序相关、功能相关和备份关系的动态故障树；在此基础上进行关联故障分析和排故流程图转化。结果表明：该方法能系统地、全面地反映故障触发逻辑，提供快速、准确、有效的故障隔离程序，提高飞机维修保障水平，在复杂飞机系统的航线维修领域具有良好的应用前景和推广价值。     

量化选取应变电桥在载荷校准中的应用

在载荷校准中,应变电桥的选择直接影响载荷测量的精度。以起落架单向加载工况下的电桥为研究对象,用数学公式来量化表示电桥的线性度、响应系数和单向性等基本特性,并根据其特性筛选电桥,然后用所选电桥建立载荷方程。结果表明该方法具有效率高、质量高、精度高等优点,同时也实现了载荷方程的自动化计算。     

Loop Models from SOHO Observations

The Coronal Diagnostic Spectrometer (CDS) on SOHO is a grazing/normal incidence spectrograph, aimed to produce stigmatic spectra of selected regions of the solar surface in six spectral windows of the extreme ultraviolet from 150 Å to 785 Å (Harrison et al. 1995). In the present work, CDS, EIT, MDI and Yohkoh observations of active region lops have been analyzed. These observations are part of JOP 54. CDS monochromatic images from lines at different temperatures have been co-aligned with EIT and MDI images, and loop structures have been clearly identified using Fe XVI emission lines. Density sensitive lines and lines from adjacent stages of ionization of Fe ions have been used to measure electron density and temperature along the loop length; these measurements have been used to determine the electron pressure along the loop and test the constant pressure assumption commonly used in loop modeling. The observations have been compared with a static, isobaric loop model (Landini and Monsignori Fossi 1975) assuming a temperature-constant heating function in the energy balance equation. Good agreement is found for the temperature distribution along the loop at the coronal level. The model pressure is somewhat higher than obtained from density sensitive line ratios.     

可控高温管式检定炉的设计及制造

介绍了高温管式检定炉的设计、制造过程及其控制方法，并给出了系统调校的过程及相关的实验参数。